WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

H01R　LINE CONNECTORS; CURRENT COLLECTORS (switches, fuses H01H; coupling devices of the waveguide type H01P 5/00; switching arrangements for the supply or distribution of electric power H02B; installations of electric lines, cables or auxiliary apparatus H02G; printed means for providing electric connections to or between printed circuits H05K)

H01R 3/00 Electrically-conductive connections not otherwise provided for

H01R 3/08 ・for making connection to a liquid ({slip rings with liquid contacts H01R 39/30; H01R 39/646}; electrodes for batteries or accumulators H01M)

H01R 4/00 Electrically-conductive connections between two or more conductive members in direct contact and means for effecting or maintaining such contact (details of disengageable contacts of two-part coupling devices H01R 13/00; two-part coupling devices H01R 12/70, H01R 24/00 - H01R 33/00; flexible or turnable line connectors H01R 35/00; non rotary current collectors H01R 41/00)

H01R 4/01 ・Connections using shape memory materials, e.g. shape memory metal

H01R 4/02 ・Soldered or welded connections {(H01R 4/625, H01R 4/723, H01R 12/59 take precedence)}

H01R 4/021 ・・{between two or more cables or wires}

H01R 4/022 ・・・{comprising preapplied solder}

H01R 4/023 ・・{between cables or wires and terminals}

H01R 4/024 ・・・{comprising preapplied solder}

H01R 4/025 ・・{with built-in heat generating elements}

H01R 4/026 ・・{comprising means for eliminating an insulative layer prior to soldering or welding}

H01R 4/027 ・・{comprising means for positioning or holding the parts to be soldered or welded}

H01R 4/028 ・・{comprising means for preventing flowing or wicking of solder or flux in parts not desired}

H01R 4/029 ・・{Welded connections (H01R 4/021 to H01R 4/028 take precedence)}

H01R 4/04 ・using electrically conductive adhesives

H01R 4/06 ・Riveted connections (by explosion H01R 4/08)

H01R 4/08 ・effected by an explosion

H01R 4/10 ・effected solely by twisting, wrapping, bending, crimping, or other permanent deformation

H01R 4/12 ・・by twisting

H01R 4/14 ・・by wrapping

H01R 4/16 ・・by bending

H01R 4/18 ・・by crimping {(H01R 4/01, H01R 4/2495 take precedence; for coaxial cables H01R 9/0518)}

H01R 4/182 ・・・{for flat conductive elements, e.g. flat cables (H01R 4/01 takes precedence)}

H01R 4/183 ・・・{for cylindrical elongated bodies, e.g. cables having circular cross-section (H01R 4/01 takes precedence)}

H01R 4/184 ・・・・{comprising a U-shaped wire-receiving portion}

H01R 4/185 ・・・・・{combined with a U-shaped insulation-receiving portion}

H01R 4/186 ・・・・{using a body comprising a plurality of cable-accommodating recesses or bores}

H01R 4/187 ・・・{combined with soldering or welding}

H01R 4/188 ・・・{having an uneven wire-receiving surface to improve the contact}

H01R 4/20 ・・・using a crimping sleeve {(H01R 4/01 takes precedence)}

H01R 4/203 ・・・・{having an uneven wire-receiving surface to improve the contact}

H01R 4/206 ・・・・・{with transversal grooves or threads}

H01R 4/22 ・End caps, i.e. of insulating or conductive material for covering or maintaining connections between wires entering the cap from the same end

H01R 4/24 ・Needle-point, slotted plate, or analogous contact members penetrating insulation or cable strands {(for multiphase cables H01R 9/031; for coaxial cables H01R 9/053; for flat cables H01R 12/67)}

H01R 4/2404 ・・{having at least one tooth, prong, pin or needle penetrating the insulation (penetration into a wire end in axial direction H01R 4/5033)}

H01R 4/2408 ・・・{actuated by means of at least one clamping screw (clamped connection using a screw H01R 4/30)}

H01R 4/2412 ・・・{actuated by means of an insulating cam or wedge}

H01R 4/2416 ・・{having insulation cutting edges e.g. tuning fork type, slotted plate type, wire type}

H01R 4/242 ・・・{the contact member being a single slotted plate}

H01R 4/2425 ・・・・{flat plate; multi-layered flat plate}

H01R 4/2429 ・・・・・{mounted in an insulating base}

H01R 4/2433 ・・・・・・{one part of the base being movable to push the cable into the slot}

H01R 4/2437 ・・・・{curved plate}

H01R 4/2441 ・・・・・{being tube-shaped with a single slot}

H01R 4/2445 ・・・{the contact member being provided with additional means acting on the wire e.g. a second insulation penetrating means, strain relief means, wire cutting knife}

H01R 4/245 ・・・・{with at least two slotted flat portions}

H01R 4/2454 ・・・・・{being linked in such a way as to form a U-shape, the branches of which are slotted}

H01R 4/2458 ・・・・{the contact member having a slotted tubular configuration, e.g. slotted tube-end}

H01R 4/2462 ・・・・{the contact member having a slotted bent configuration, e.g. slotted bight}

H01R 4/2466 ・・・・{the contact member having a channel-shaped part, the opposite sidewalls of which comprise insulation cutting means}

H01R 4/247 ・・{penetrating insulation by means of a spring, e.g. a coil spring}

H01R 4/2475 ・・{penetrating insulation by means of screw, nut or bolt}

H01R 4/2479 ・・・{penetrating area under the head of the screw}

H01R 4/2483 ・・・{penetrating area under the tip of the screw}

H01R 4/2487 ・・・{penetrating by means of the thread of the screw}

H01R 4/2491 ・・{penetrating insulation by means of a conductive cam or wedge}

H01R 4/2495 ・・{Insulation penetration combined with permanent deformation of contact member, e.g. crimping}

H01R 4/26 ・Connections in which at least one of the connecting parts has projections which bite into or engage the other connecting part in order to improve the contact ({H01R 4/188, H01R 4/203, H01R 4/5075 take precedence}; using shape memory materials H01R 4/01)

H01R 4/28 ・Clamped connections, spring connections (made by means of terminals specially adapted for contact with, or insertion into, printed circuits H01R 12/00)

H01R 4/30 ・・utilising a screw or nut clamping member (H01R 4/50 takes precedence; utilising a clamping member acted on by screw or nut H01R 4/38; {for coaxial cables H01R 9/0521})

H01R 4/301 ・・・{having means for preventing complete unscrewing of screw or nut (measures against loss of bolt or nut in general F16B 41/002)}

H01R 4/302 ・・・{having means for preventing loosening of screw or nut, e.g. vibration-proof connection (locking of screw or nut in general F16B 39/00 and subgroups)}

H01R 4/304 ・・・{having means for improving contact}

H01R 4/305 ・・・{having means for facilitating engagement of conductive member or for holding it in position}

H01R 4/307 ・・・{characterised by the thread of the screw or nut (shapes of thread, special thread forms F16B 33/02)}

H01R 4/308 ・・・{Conductive members located parallel to axis of screw}

H01R 4/32 ・・・Conductive members located in slot or hole in screw

H01R 4/34 ・・・Conductive members located under head of screw

H01R 4/36 ・・・Conductive members located under tip of screw

H01R 4/363 ・・・・{with intermediate part between tip and conductive member}

H01R 4/366 ・・・・・{intermediate part attached to the tip of the screw}

H01R 4/38 ・・utilising a clamping member acted on by screw or nut (H01R 4/50 takes precedence)

H01R 4/40 ・・・Pivotable clamping member

H01R 4/42 ・・・Clamping area to one side of screw only

H01R 4/44 ・・・Clamping areas on both sides of screw

H01R 4/46 ・・・Clamping area between two screws placed side by side

H01R 4/48 ・・utilising a spring, clip, or other resilient member (H01R 4/52 takes precedence)

H01R 4/4809 ・・・{using a leaf spring}

H01R 4/4818 ・・・・{adapted for axial insertion of a wire end}

H01R 4/4827 ・・・・・{with an opening in the housing for insertion of a release tool}

H01R 4/4836 ・・・・・{with integral release means}

H01R 4/4845 ・・・・{insertion of a wire only possible by pressing on the spring}

H01R 4/4854 ・・・{using a wire spring}

H01R 4/4863 ・・・・{Coil spring}

H01R 4/4872 ・・・・・{axially compressed to retain wire end}

H01R 4/4881 ・・・{using a louver type spring}

H01R 4/489 ・・・{spring force increased by screw, cam, wedge, or other fastening means}

H01R 4/50 ・・utilising a cam, wedge, cone or ball {also combined with a screw}

H01R 4/5008 ・・・{using rotatable cam}

H01R 4/5016 ・・・{using a cone}

H01R 4/5025 ・・・・{combined with a threaded ferrule operating in a direction parallel to the conductor}

H01R 4/5033 ・・・{using wedge or pin penetrating into the end of a wire in axial direction of the wire}

H01R 4/5041 ・・・{using a tapered groove}

H01R 4/505 ・・・{using an excentric element}

H01R 4/5058 ・・・{using a ball}

H01R 4/5066 ・・・{mounted in an insulating housing having a cover providing clamping force}

H01R 4/5075 ・・・{having an uneven wire receiving surface to improve the contact}

H01R 4/5083 ・・・{using a wedge}

H01R 4/5091 ・・・・{combined with a screw}

H01R 4/52 ・・・which is spring loaded

H01R 4/54 ・Bayonet or keyhole

H01R 4/56 ・One conductor screwing into another

H01R 4/58 ・characterised by the form or material of the contacting members (H01R 4/01 takes precedence)

H01R 4/60 ・・Connections between or with tubular conductors (H01R 4/56 takes precedence)

H01R 4/62 ・・Connections between conductors of different materials; Connections between or with aluminium or steel-core aluminium conductors (H01R 4/68 takes precedence)

H01R 4/625 ・・・{Soldered or welded connections}

H01R 4/64 ・・Connections between or with conductive parts having primarily a non-electric function, e.g. frame, casing, rail

H01R 4/643 ・・・{for rigid cylindrical bodies}

H01R 4/646 ・・・{for cables or flexible cylindrical bodies}

H01R 4/66 ・・Connections with the terrestrial mass, e.g. earth plate, earth pin

H01R 4/68 ・・Connections to or between superconductive connectors

H01R 4/70 ・Insulation of connections (end caps H01R 4/22)

H01R 4/72 ・・using a heat shrinking insulating sleeve (heat recovarable plastics B29C 61/00)

H01R 4/723 ・・・{Making a soldered electrical connection simultaneously with the heat shrinking}

H01R 4/726 ・・・{Making a non-soldered electrical connection simultaneously with the heat shrinking}

H01R 9/00 Connectors and connecting arrangements providing a plurality of mutually insulated connections; Terminals or binding posts mounted upon a base or in a case; Terminal strips; Terminal blocks (details of direct connections or connections using contact members penetrating insulation H01R 4/00; {individual connecting parts H01R 11/00;} specially adapted for printed circuits, flat or ribbon cables, or like generally planar structures H01R 12/00; coupling devices H01R 12/70, H01R 24/00-H01R 33/00; flexible or turnable line connectors H01R 35/00)

H01R 9/03 ・Connectors arranged to contact a plurality of the conductors of a multiconductor cable, {e.g. tapping connections}

H01R 9/031 ・・{for multiphase cables, e.g. with contact members penetrating insulation of a plurality of conductors (insulation penetrating contact members in general H01R 4/24)}

H01R 9/032 ・・{for shielded multiconductor cable (coaxial cables with one conductor surrounded by shield H01R 9/05; flat shielded cables H01R 12/594)}

H01R 9/034 ・・・{connection of the shield to an additional grounding conductor}

H01R 9/035 ・・・{twisted pair surrounded by shield}

H01R 9/037 ・・・{connection to shield by action of a resilient member}

H01R 9/038 ・・・{each conductor being individually surrounded by shield}

H01R 9/05 ・・for coaxial cables

H01R 9/0503 ・・・{Connection between two cable ends}

H01R 9/0506 ・・・{Connection between three or more cable ends}

H01R 9/0509 ・・・{Tapping connections}

H01R 9/0512 ・・・{Connections to an additional grounding conductor}

H01R 9/0515 ・・・{Connection to a rigid planar substrate, e.g. printed circuit board}

H01R 9/0518 ・・・{Connection to outer conductor by crimping or by crimping ferrule (in general H01R 4/18)}

H01R 9/0521 ・・・{Connection to outer conductor by action of a nut (in general H01R 4/30)}

H01R 9/0524 ・・・{Connection to outer conductor by action of a clamping member, e.g. screw fastening means (H01R 9/0515 takes precedence; in general H01R 4/38)}

H01R 9/0527 ・・・{Connection to outer conductor by action of a resilient member, e.g. spring (in general H01R 4/48)}

H01R 9/053 ・・・using contact members penetrating insulation

H01R 9/07 ・・for flat or ribbon cables {or flexible printed circuits}

H01R 9/0707 ・・・{with exposed conductor portions for connection}

H01R 9/0714 ・・・・{to another flat or ribbon cable or flexible printed circuit, e.g. by pressing contact areas against each other}

H01R 9/0721 ・・・・・{by means of interconnecting elements}

H01R 9/0728 ・・・・{to a cable of another type, e.g. round section cable}

H01R 9/0735 ・・・・{to conductive elements on a rigid planar substrate, e.g. to a printed circuit board}

H01R 9/0742 ・・・・{to contact elements}

H01R 9/075 ・・・{with contacts penetrating cable insulation for making contact with conductors, e.g. needle points (in general H01R 4/24)}

H01R 9/0757 ・・・・{with contacts having at least a slotted plate for penetration of cable insulation, e.g. insulation displacement contacts for round conductor flat cables (in general H01R 4/2416)}

H01R 9/0764 ・・・・・{to another flat or ribbon cable or flexible printed circuit, e.g. tapping connection}

H01R 9/0771 ・・・・{with permanent deformation of contacts, e.g. crimping contacts for rectangular conductor flat cables (in general H01R 4/2495)}

H01R 9/0778 ・・・{for shielded flat cable}

H01R 9/0785 ・・・・{connection of the shield to an additional grounding conductor}

H01R 9/0792 ・・・・{each conductor being individually surrounded by shield, e.g. multiple coaxial cables in flat structure}

H01R 9/09 ・Connectors for printed circuits (printed connections to or between printed circuits H05K); {Terminals, terminal strips, terminal blocks or bases for printed circuits}

H01R 9/091 ・・{terminals for or connections to a printed circuit board (H01R 9/0515 takes precedence)}

H01R 9/092 ・・・{Terminals having a press fit or a compliant portion and a shank passing through a hole in the printed circuit board}

H01R 9/093 ・・・{Terminal blocks providing connections to wires or cables}

H01R 9/095 ・・・{Connections on the surface of the printed circuit}

H01R 9/096 ・・{Connections between two or more printed circuits}

H01R 9/097 ・・・{by an interconnection through aligned holes in the boards or multilayer board}

H01R 9/098 ・・・{the printed circuits being on the same board (with plated through holes H05K 3/42)}

H01R 9/11 ・End pieces for multiconductor cables supported by the cable and for facilitating connections to other conductive members, {e.g. for liquid cooled welding cables}

H01R 9/15 ・Connectors for wire wrapping

H01R 9/16 ・Fastening of connecting parts to base or case; Insulating connecting parts from base or case (lead-through insulators H01B 17/26)

H01R 9/18 ・・Fastening by means of screw or nut

H01R 9/20 ・・Fastening by means of rivet or eyelet

H01R 9/22 ・Bases, e.g. strip, block, panel {(for printed circuits H01R 12/50)}

H01R 9/223 ・・{Insulating enclosures for terminals (for switches H01H 9/0264)}

H01R 9/226 ・・{comprising a plurality of conductive flat strips providing connection between wires or components (H01R 9/2425 takes precedence)}

H01R 9/24 ・・Terminal blocks

H01R 9/2408 ・・・{Modular blocks (H01R 9/26 takes precedence)}

H01R 9/2416 ・・・{Means for guiding or retaining wires or cables connected to terminal blocks}

H01R 9/2425 ・・・{Structural association with built-in components (for coupling parts H01R 13/66)}

H01R 9/2433 ・・・・{with built-in switch}

H01R 9/2441 ・・・・{with built-in overvoltage protection}

H01R 9/245 ・・・・{with built-in fuse}

H01R 9/2458 ・・・{Electrical interconnections between terminal blocks}

H01R 9/2466 ・・・・{using a planar conductive structure, e.g. printed circuit board}

H01R 9/2475 ・・・{Means facilitating correct wiring, e.g. marking plates, identification tags}

H01R 9/2483 ・・・{specially adapted for ground connection}

H01R 9/2491 ・・・{Terminal blocks structurally associated with plugs or sockets}

H01R 9/26 ・・・Clip-on terminal blocks for side-by-side rail- or strip-mounting

H01R 9/2608 ・・・・{Fastening means for mounting on support rail or strip (H01R 9/2691 takes precedence; for switch or other electrical device H02B 1/042)}

H01R 9/2616 ・・・・{End clamping members}

H01R 9/2625 ・・・・{with built-in electrical component}

H01R 9/2633 ・・・・・{with built-in switch}

H01R 9/2641 ・・・・・{with built-in overvoltage protection}

H01R 9/265 ・・・・・{with built-in fuse}

H01R 9/2658 ・・・・・{with built-in data-bus connection}

H01R 9/2666 ・・・・・{with built-in test-points}

H01R 9/2675 ・・・・{Electrical interconnections between two blocks, e.g. by means of busbars}

H01R 9/2683 ・・・・{Marking plates or tabs}

H01R 9/2691 ・・・・{with ground wire connection to the rail (in general H01R 4/64)}

H01R 9/28 ・・Terminal boards

H01R 11/00 Connectors providing two or more spaced connecting locations for conductive members which are thereby interconnected; End pieces for wires or cables, supported by the wire or cable and for facilitating electrical connection to some other wire, terminal, or conductive member (connections between members in direct contact H01R 4/00 ; structural associations of a plurality of mutually-insulated electrical connecting elements H01R 9/00 ; coupling devices H01R 12/70, H01R 24/00-H01R 29/00, H01R 33/00 ; flexible or turnable line connectors H01R 35/00)

H01R 11/01 ・characterised by the form or arrangement of the conductive interconnection between the connecting locations

H01R 11/03 ・characterised by the relationship between the connecting locations (H01R 11/11 takes precedence)

H01R 11/05 ・・the connecting locations having different types of direct connections

H01R 11/07 ・・the connecting locations being of the same type but different sizes

H01R 11/09 ・・the connecting locations being identical

H01R 11/11 ・End pieces or tapping pieces for wires, supported by the wire and for facilitating electrical connection to some other wire, terminal or conductive member (H01R 11/01 takes precedence; for multiconductor cables H01R 9/11)

H01R 11/12 ・・End pieces terminating in an eye, hook, or fork

H01R 11/14 ・・・the hook being adapted for hanging on overhead or other suspended lines, e.g. hot line clamp

H01R 11/15 ・・・・Hook in the form of a screw clamp

H01R 11/16 ・・End pieces terminating in a soldering tip or socket

H01R 11/18 ・・End pieces terminating in a probe

H01R 11/20 ・・End pieces terminating in a needle point or analogous contact for penetrating insulation or cable strands

H01R 11/22 ・・End pieces terminating in a spring clip

H01R 11/24 ・・・with gripping jaws, e.g. crocodile clip

H01R 11/26 ・・End pieces terminating in a screw clamp, screw or nut

H01R 11/28 ・・End pieces consisting of a ferrule or sleeve

H01R 11/281 ・・・{for connections to batteries}

H01R 11/282 ・・・・{comprising means for facilitating engagement or disengagement, e.g. quick release terminal}

H01R 11/283 ・・・・{Bolt, screw or threaded ferrule parallel to the battery post}

H01R 11/284 ・・・・{comprising means for preventing corrosion, e.g. covers, enclosures filled with gel}

H01R 11/285 ・・・・{Battery post and cable secured by the same locking means}

H01R 11/286 ・・・・{having means for improving contact between battery post and clamping member, e.g. uneven interior surface}

H01R 11/287 ・・・・{Intermediate parts between battery post and cable end piece}

H01R 11/288 ・・・・{Interconnections between batteries}

H01R 11/289 ・・・・{characterised by the shape or the structure of the battery post}

H01R 11/30 ・・End pieces held in contact by a magnet

H01R 11/32 ・・End pieces with two or more terminations

H01R 12/00 Structural associations of a plurality of mutually-insulated electrical connecting elements, specially adapted for printed circuits, e.g. printed circuit boards [PCBs], flat or ribbon cables, or like generally planar structures, e.g. terminal strips, terminal blocks; Coupling devices specially adapted for printed circuits, flat or ribbon cables, or like generally planar structures; Terminals specially adapted for contact with, or insertion into, printed circuits, flat or ribbon cables, or like generally planar structures (printed connections to, or between, printed circuits H05K 1/11)

H01R 12/50 ・Fixed connections

H01R 12/51 ・・for rigid printed circuits or like structures

H01R 12/515 ・・・{Terminal blocks providing connections to wires or cables}

H01R 12/52 ・・・connecting to other rigid printed circuits or like structures

H01R 12/523 ・・・・{by an interconnection through aligned holes in the boards or multilayer board}

H01R 12/526 ・・・・{the printed circuits being on the same board (with plated through holes H05K 3/42)}

H01R 12/53 ・・・connecting to cables except for flat or ribbon cables

H01R 12/55 ・・・characterized by the terminals

H01R 12/57 ・・・・surface mounting terminals

H01R 12/58 ・・・・terminals for insertion into holes

H01R 12/585 ・・・・・{Terminals having a press fit or a compliant portion and a shank passing through a hole in the printed circuit board}

H01R 12/59 ・・for flexible printed circuits, flat or ribbon cables or like structures

H01R 12/592 ・・・{connections to contact elements}

H01R 12/594 ・・・{for shielded flat cable}

H01R 12/596 ・・・・{Connection of the shield to an additional grounding conductor, e.g. drain wire}

H01R 12/598 ・・・・{Each conductor being individually surrounded by shield, e.g. multiple coaxial cables in flat structure}

H01R 12/61 ・・・connecting to flexible printed circuits, flat or ribbon cables or like structures

H01R 12/613 ・・・・{by means of interconnecting elements}

H01R 12/616 ・・・・・{having contacts penetrating insulation for making contact with conductors, e.g. needle points (in general H01R 4/24)}

H01R 12/62 ・・・connecting to rigid printed circuits or like structures

H01R 12/63 ・・・connecting to another shape cable

H01R 12/65 ・・・characterized by the terminal

H01R 12/67 ・・・・insulation penetrating terminals

H01R 12/675 ・・・・・{with contacts having at least a slotted plate for penetration of cable insulation, e.g. insulation displacement contacts for round conductor flat cables (in general H01R 4/2416)}

H01R 12/68 ・・・・・comprising deformable portions

H01R 12/69 ・・・・deformable terminals e.g. crimping terminals

H01R 12/70 ・Coupling devices

H01R 12/7005 ・・{Guiding, mounting, polarizing or locking means; Extractors (for printed circuit boards H05K)}

H01R 12/7011 ・・・{Locking or fixing a connector to a PCB}

H01R 12/7017 ・・・・{Snap means}

H01R 12/7023 ・・・・・{integral with the coupling device}

H01R 12/7029 ・・・・・{not integral with the coupling device}

H01R 12/7035 ・・・・{involving non-elastic deformation, e.g. plastic deformation, melting (H01R 12/7064 takes precedence)}

H01R 12/7041 ・・・・{Gluing or taping}

H01R 12/7047 ・・・・{with a fastener through a screw hole in the coupling device}

H01R 12/7052 ・・・・{characterised by the locating members}

H01R 12/7058 ・・・・{characterised by the movement, e.g. pivoting, camming or translating parallel to the PCB}

H01R 12/7064 ・・・・{Press fitting}

H01R 12/707 ・・・・{Soldering or welding}

H01R 12/7076 ・・{for connection between PCB and component, e.g. display (plugging components in general H05K 7/10)}

H01R 12/7082 ・・{Coupling device supported only by cooperation with PCB}

H01R 12/7088 ・・{Arrangements for power supply}

H01R 12/7094 ・・{with switch operated by engagement of PCB}

H01R 12/71 ・・for rigid printing circuits or like structures

H01R 12/712 ・・・{co-operating with the surface of the printed circuit or with a coupling device exclusively provided on the surface of the printed circuit (H01R 12/72 takes precedence)}

H01R 12/714 ・・・・{with contacts abutting directly the printed circuit; Button contacts therefore provided on the printed circuit}

H01R 12/716 ・・・・{Coupling device provided on the PCB}

H01R 12/718 ・・・・・{Contact members provided on the PCB without an insulating housing (contacts for abutting H01R 12/714)}

H01R 12/72 ・・・coupling with the edge of the rigid printed circuits or like structures

H01R 12/721 ・・・・{cooperating directly with the edge of the rigid printed circuits}

H01R 12/722 ・・・・{coupling devices mounted on the edge of the printed circuits}

H01R 12/724 ・・・・・{containing contact members forming a right angle}

H01R 12/725 ・・・・・{containing contact members presenting a contact carrying strip, e.g. edge-like strip}

H01R 12/727 ・・・・・{Coupling devices presenting arrays of contacts}

H01R 12/728 ・・・・・{Coupling devices without an insulating housing provided on the edge of the PCB}

H01R 12/73 ・・・・connecting to other rigid printed circuits or like structures

H01R 12/732 ・・・・・{Printed circuits being in the same plane}

H01R 12/735 ・・・・・{Printed circuits including an angle between each other}

H01R 12/737 ・・・・・・{Printed circuits being substantially perpendicular to each other (for printed connections H05K 3/366 takes precedence)}

H01R 12/75 ・・・connecting to cables except for flat or ribbon cables

H01R 12/77 ・・for flexible printed circuits, flat or ribbon cables or like structures

H01R 12/771 ・・・{Details}

H01R 12/772 ・・・・{Strain relieving means}

H01R 12/774 ・・・・{Retainers}

H01R 12/775 ・・・・{Ground or shield arrangements (in general H01R 13/658)}

H01R 12/777 ・・・{Coupling parts carrying pins, blades or analogous contacts (H01R 12/78, H01R 12/79 take precedence)}

H01R 12/778 ・・・{Coupling parts carrying sockets, clips or analogous counter-contacts (H01R 12/78, H01R 12/79 take precedence)}

H01R 12/78 ・・・connecting to other flexible printed circuits, flat or ribbon cables or like structures

H01R 12/79 ・・・connecting to rigid printed circuits or like structures

H01R 12/81 ・・・connecting to another cable except for flat or ribbon cable

H01R 12/82 ・・connected with low or zero insertion force

H01R 12/83 ・・・connected with pivoting of printed circuits or like after insertion

H01R 12/85 ・・・contact pressure producing means, contacts activated after insertion of printed circuits or like structures

H01R 12/853 ・・・・{Fluid activated}

H01R 12/856 ・・・・{activated by shape memory material}

H01R 12/87 ・・・・acting automatically by insertion of rigid printed or like structures

H01R 12/88 ・・・・acting manually by rotating or pivoting connector housing parts

H01R 12/89 ・・・・acting manually by moving connector housing parts linearly e.g. slider

H01R 12/91 ・・allowing relative movement between coupling parts e.g. floating or self aligning (for coupling devices not specially adapted for printed circuits, flat or ribbon cables, or like generally planar structures, H01R 13/6315 takes precedence)

H01R 13/00 Details of coupling devices of the kinds covered by groups H01R 12/70 or H01R 24/00-H01R 33/00{(electro-optical connectors G02B 6/24)}

H01R 13/005 ・{Electrical coupling combined with fluidic coupling}

H01R 13/02 ・Contact members

H01R 13/025 ・・{formed by the conductors of a cable end}

H01R 13/03 ・・characterised by the material, e.g. plating, or coating materials

H01R 13/035 ・・・{Plated dielectric material}

H01R 13/04 ・・Pins or blades for co-operation with sockets

H01R 13/05 ・・・Resilient pins or blades (carrying separate resilient parts H01R 13/15)

H01R 13/052 ・・・・{co-operating with sockets having a circular transverse section}

H01R 13/055 ・・・・{co-operating with sockets having a rectangular transverse section}

H01R 13/057 ・・・・{co-operating with sockets having a square transverse section}

H01R 13/08 ・・・Resiliently-mounted rigid pins or blades

H01R 13/10 ・・Sockets for co-operation with pins or blades

H01R 13/11 ・・・Resilient sockets (carrying separate resilient parts H01R 13/15)

H01R 13/111 ・・・・{co-operating with pins having a circular transverse section}

H01R 13/112 ・・・・{forked sockets having two legs}

H01R 13/113 ・・・・{co-operating with pins or blades having a rectangular transverse section}

H01R 13/114 ・・・・{co-operating with pins or blades having a square transverse section}

H01R 13/115 ・・・・U-shaped sockets having inwardly bent legs, e.g. spade type

H01R 13/14 ・・・Resiliently-mounted rigid sockets

H01R 13/15 ・・Pins, blades or sockets having separate spring member for producing or increasing contact pressure

H01R 13/17 ・・・with spring member on the pin

H01R 13/18 ・・・with the spring member surrounding the socket

H01R 13/187 ・・・with spring member in the socket

H01R 13/193 ・・Means for increasing contact pressure at the end of engagement of coupling part, {e.g. zero insertion force or no friction(combined with printed circuit boardsH01R 23/6813)}

H01R 13/20 ・・Pins, blades, or sockets shaped, or provided with separate member, to retain co-operating parts together

H01R 13/207 ・・・by screw-in connection

H01R 13/213 ・・・by bayonet connection

H01R 13/22 ・・Contacts for co-operating by abutting

H01R 13/24 ・・・resilient; resiliently-mounted

H01R 13/2407 ・・・・{characterized by the resilient means}

H01R 13/2414 ・・・・・{conductive elastomers}

H01R 13/2421 ・・・・・{using coil springs}

H01R 13/2428 ・・・・・{using meander springs}

H01R 13/2435 ・・・・{with opposite contact points, e.g. C beam}

H01R 13/2442 ・・・・{with a single cantilevered beam}

H01R 13/245 ・・・・{by stamped-out resilient contact arm}

H01R 13/2457 ・・・・{consisting of at least two resilient arms contacting the same counterpart}

H01R 13/2464 ・・・・{characterized by the contact point}

H01R 13/2471 ・・・・・{pin shaped}

H01R 13/2478 ・・・・・{spherical}

H01R 13/2485 ・・・・・{for contacting a ball}

H01R 13/2492 ・・・・・{multiple contact points}

H01R 13/26 ・・Pin or blade contacts for sliding co-operation on one side only {(for modular jack type connectors H01R 24/62)}

H01R 13/28 ・・Contacts for sliding cooperation with identically-shaped contact, e.g. for hermaphroditic coupling devices {(H01R 24/84 takes precedence)}

H01R 13/33 ・・Contact members made of resilient wire

H01R 13/35 ・・for non-simultaneous co-operation with different types of contact member, e.g. socket co-operation with either round or flat pin {(H01R 27/00 takes precedence)}

H01R 13/40 ・Securing contact members in or to a base or case; Insulating of contact members

H01R 13/405 ・・Securing in non-demountable manner, e.g. moulding, riveting

H01R 13/41 ・・・by frictional grip in grommet, panel or base

H01R 13/415 ・・・by permanent deformation of contact member

H01R 13/42 ・・Securing in a demountable manner

H01R 13/422 ・・・Securing in resilient one-piece base or case, {e.g. by friction}; One-piece base or case formed with resilient locking means

H01R 13/4223 ・・・・{comprising integral flexible contact retaining fingers}

H01R 13/4226 ・・・・・{comprising two or more integral flexible retaining fingers acting on a single contact}

H01R 13/424 ・・・Securing in base or case composed of a plurality of insulating parts having at least one resilient insulating part

H01R 13/426 ・・・Securing by a separate resilient retaining piece supported by base or case, e.g. collar {or metal contact-retention clip}

H01R 13/428 ・・・by resilient locking means on the contact members; by locking means on resilient contact members

H01R 13/432 ・・・・by stamped-out resilient tongue snapping behind shoulder in base or case

H01R 13/434 ・・・・by separate resilient locking means on contact member, e.g. retainer collar or ring around contact member

H01R 13/436 ・・・Securing a plurality of contact members by one locking piece {or operation}

H01R 13/4361 ・・・・{Insertion of locking piece perpendicular to direction of contact insertion}

H01R 13/4362 ・・・・・{comprising a temporary and a final locking position}

H01R 13/4364 ・・・・{Insertion of locking piece from the front}

H01R 13/4365 ・・・・・{comprising a temporary and a final locking position}

H01R 13/4367 ・・・・{Insertion of locking piece from the rear}

H01R 13/4368 ・・・・・{comprising a temporary and a final locking position}

H01R 13/44 ・Means for preventing access to live contacts {(making use of a switch actuated by engagement of counterpart H01R 13/7036)}

H01R 13/443 ・・Dummy Plugs

H01R 13/447 ・・Shutter or cover plate

H01R 13/453 ・・・Shutter or cover plate opened by engagement of counterpart

H01R 13/4532 ・・・・{Rotating shutter}

H01R 13/4534 ・・・・{Laterally sliding shutter}

H01R 13/4536 ・・・・{Inwardly pivoting shutter}

H01R 13/4538 ・・・・{Covers sliding or withdrawing in the direction of engagement}

H01R 13/46 ・Bases; Cases

H01R 13/465 ・・{Identification means, e.g. labels, tags, markings (H01R 9/2475, H01R 9/2683 take precedence)}

H01R 13/50 ・・formed as an integral body (H01R 13/514 takes precedence)

H01R 13/501 ・・・{comprising an integral hinge or a frangible part}

H01R 13/502 ・・composed of different pieces (H01R 13/514 takes precedence)

H01R 13/5025 ・・・{one or more pieces being of resilient material}

H01R 13/504 ・・・different pieces being moulded, cemented, welded, e.g. ultrasonic, or swaged together

H01R 13/5045 ・・・・{different pieces being assembled by press-fit}

H01R 13/506 ・・・assembled by snap action of the parts

H01R 13/508 ・・・assembled by {a separate} clip or spring

H01R 13/512 ・・・assembled by screw or screws

H01R 13/514 ・・composed as a modular blocks or assembly, i.e. composed of co-operating parts provided with contact members or holding contact members between them

H01R 13/516 ・・Means for holding or embracing insulating body, e.g. casing, {hoods}

H01R 13/518 ・・・for holding or embracing several coupling parts, e.g. frames

H01R 13/52 ・・Dustproof, splashproof, drip-proof, waterproof, or flameproof cases

H01R 13/5202 ・・・{Sealing means between parts of housing or between housing part and a wall, e.g. sealing rings}

H01R 13/5205 ・・・{Sealing means between cable and housing, e.g. grommet (H01R 13/5221 takes precedence)}

H01R 13/5208 ・・・・{having at least two cable receiving openings}

H01R 13/521 ・・・{Sealing between contact members and housing, e.g. sealing insert}

H01R 13/5213 ・・・{Covers}

H01R 13/5216 ・・・{characterised by the sealing material, e.g. gels or resins}

H01R 13/5219 ・・・{Sealing means between coupling parts, e.g. interfacial seal}

H01R 13/5221 ・・・・{having cable sealing means}

H01R 13/5224 ・・・{for medical use}

H01R 13/5227 ・・・{with evacuation of penetrating liquids}

H01R 13/523 ・・・for use under water

H01R 13/527 ・・・Flameproof cases (H01R 13/70 takes precedence)

H01R 13/53 ・・Bases or cases for heavy duty; Bases or cases {for high voltage} with means for preventing corona or arcing

H01R 13/533 ・・Bases, cases made for use in extreme conditions, e.g. high temperature, radiation, vibration, corrosive environment, pressure (H01R 13/52 takes precedence)

H01R 13/56 ・Means for preventing chafing or fracture of flexible leads at outlet from coupling part

H01R 13/562 ・・{Bending-relieving}

H01R 13/565 ・・{Torsion-relieving}

H01R 13/567 ・・{Traverse cable outlet or wire connection}

H01R 13/58 ・Means for relieving strain on wire connection, e.g. cord grip, {for avoiding loosening of connections between wires and terminals within a coupling device terminating a cable (for flat or ribbon cables H01R 12/771; for distribution boxes H02G 3/0616)}

H01R 13/5804 ・・{comprising a separate cable clamping part (H01R 13/5841 takes precedence)}

H01R 13/5808 ・・・{formed by a metallic element crimped around the cable (H01R 4/185 takes precedence)}

H01R 13/5812 ・・・{the cable clamping being achieved by mounting the separate part on the housing of the coupling device}

H01R 13/5816 ・・・{for cables passing through an aperture in a housing wall, the separate part being captured between cable and contour of aperture (in general H01B 17/586)}

H01R 13/582 ・・{the cable being clamped between assembled parts of the housing}

H01R 13/5825 ・・・{the means comprising additional parts captured between housing parts and cable}

H01R 13/5829 ・・・{the clamping part being flexibly or hingedly connected to the housing}

H01R 13/5833 ・・{the cable being forced in a tortuous or curved path, e.g. knots in cable (H01R 13/582 takes precedence)}

H01R 13/5837 ・・{specially adapted for accommodating various sized cables (H01R 13/5825 takes precedence)}

H01R 13/5841 ・・{allowing different orientations of the cable with respect to the coupling direction}

H01R 13/5845 ・・{the strain relief being achieved by molding parts around cable and connections}

H01R 13/585 ・・Grip increasing with strain force

H01R 13/59 ・・Threaded ferrule or bolt operating in a direction parallel to the cable or wire

H01R 13/595 ・・Bolts operating in a direction transverse to the cable or wire

H01R 13/60 ・Means for supporting coupling part when not engaged

H01R 13/62 ・Means for facilitating engagement or disengagement of coupling parts or for holding them in engagement

H01R 13/6205 ・・{Two-part coupling devices held in engagement by a magnet}

H01R 13/621 ・・Bolt, set screw or screw clamp

H01R 13/6215 ・・・{using one or more bolts}

H01R 13/622 ・・Screw-ring or screw-casing (H01R 13/623 takes precedence)

H01R 13/623 ・・Casing or ring with helicoidal groove

H01R 13/625 ・・Casing or ring with bayonet engagement

H01R 13/627 ・・Snap or like fastening

H01R 13/6271 ・・・{Latching means integral with the housing (H01R 13/6276, H01R 13/6277, H01R 13/6278 take precedence)}

H01R 13/6272 ・・・・{comprising a single latching arm}

H01R 13/6273 ・・・・{comprising two latching arms}

H01R 13/6275 ・・・{Latching arms not integral with the housing (H01R 13/6276, H01R 13/6277, H01R 13/6278 take precedence)}

H01R 13/6276 ・・・{comprising one or more balls engaging in a hole or a groove}

H01R 13/6277 ・・・{comprising annular latching means, e.g. ring snapping in an annular groove}

H01R 13/6278 ・・・{comprising a pin snapping into a recess}

H01R 13/629 ・・Additional means for facilitating engagement or disengagement of coupling parts, e.g. aligning or guiding means, levers, gas pressure {electrical locking indicators, manufacturing tolerances (separate tools or apparatus H01R 43/26)}

H01R 13/62905 ・・・{comprising a camming member (H01R 13/62933 and H01R 13/641 take precedence)}

H01R 13/62911 ・・・・{U-shaped sliding element}

H01R 13/62916 ・・・・{Single camming plate}

H01R 13/62922 ・・・・{Pair of camming plates}

H01R 13/62927 ・・・・{Comprising supplementary or additional locking means}

H01R 13/62933 ・・・{Comprising exclusively pivoting lever}

H01R 13/62938 ・・・・{Pivoting lever comprising own camming means}

H01R 13/62944 ・・・・{Pivoting lever comprising gear teeth}

H01R 13/6295 ・・・・{Pivoting lever comprising means indicating incorrect coupling of mating connectors}

H01R 13/62955 ・・・・{Pivoting lever comprising supplementary/additional locking means}

H01R 13/62961 ・・・・{Pivoting lever having extendable handle}

H01R 13/62966 ・・・・{Comprising two pivoting levers}

H01R 13/62972 ・・・・・{Wherein the pivoting levers are two lever plates}

H01R 13/62977 ・・・{Pivoting levers actuating linearly camming means}

H01R 13/62983 ・・・{Linear camming means or pivoting lever for connectors for flexible or rigid printed circuit boards, flat or ribbon cables}

H01R 13/62988 ・・・・{Lever acting directly on flexible or rigid printed circuit boards, flat or ribbon cables, e.g. recess provided to this purposeon the surface or edge of the flexible or rigid printed circuit boards, flat or ribbon cables}

H01R 13/62994 ・・・・{Lever acting on a connector mounted onto the flexible or rigid printed circuit boards, flat or ribbon cables}

H01R 13/631 ・・・for engagement only

H01R 13/6315 ・・・・{allowing relative movement between coupling parts, e.g. floating connection (for coupling devices specially adapted for printed circuits, flat or ribbon cables, or like generally planar structures, H01R 12/91 takes precedence)}

H01R 13/633 ・・・for disengagement only {(in combination with safety switch H01R 13/7132)}

H01R 13/6335 ・・・・{comprising a handle}

H01R 13/635 ・・・・by mechanical pressure, e.g. spring force

H01R 13/637 ・・・・by fluid pressure, e.g. explosion

H01R 13/639 ・・Additional means for holding or locking coupling parts together, after engagement, {e.g. separate keylock, retainer strap}

H01R 13/6392 ・・・{for extension cord}

H01R 13/6395 ・・・{for wall or panel outlets}

H01R 13/6397 ・・・{with means for preventing unauthorised use}

H01R 13/64 ・Means for preventing incorrect coupling

H01R 13/641 ・・by indicating incorrect coupling; by indicating correct or full engagement

H01R 13/642 ・・by position or shape of contact members

H01R 13/645 ・・by exchangeable elements on case or base

H01R 13/6453 ・・・{comprising pin-shaped elements, capable of being orientated in different angular positions around their own longitudinal axes, e.g. pins with hexagonal base}

H01R 13/6456 ・・・{comprising keying elements at different positions along the periphery of the connector}

H01R 13/646 ・Specially adapted for high-frequency, e.g. structures providing an impedance match or phase match (non-coaxed protective earth or shield arrangements H01R 13/648
　　-H01R 13/6599; coaxed connectors specifically adapted for high frequency H01R 24/40- H01R 24/56)

H01R 13/6461 ・・Means for preventing cross-talk

H01R 13/6463 ・・・using twisted pairs of wires

H01R 13/6464 ・・・by adding capacitive elements

H01R 13/6466 ・・・・on substrates, e.g. PCBs [Printed Circuit Boards]

H01R 13/6467 ・・・by cross-over of signal conductors

H01R 13/6469 ・・・・on substrates

H01R 13/6471 ・・・by special arrangement of ground and signal conductors, e.g. GSGS [Ground-Signal-Ground-Signal]

H01R 13/6473 ・・Impedance matching

H01R 13/6474 ・・・by variation of conductive properties, e.g. by dimension variations

H01R 13/6476 ・・・・by making an aperture, e.g. a hole

H01R 13/6477 ・・・by variation of dielectric properties

H01R 13/648 ・Protective earth or shield arrangements on coupling devices (coaxially arranged shields H01R 24/38){e.g. anti-static shielding}

H01R 13/6485 ・・{Electrostatic discharge protection (in general H05F 1/00, for electric apparatus H05K 9/0067)}

H01R 13/652 ・・with earth pin, blade or socket

H01R 13/655 ・・with earth brace

H01R 13/658 ・・High frequency shielding arrangements, e.g. against EMI [Electro-Magnetic Interference] or EMP [Electro-Magnetic Pulse] {(coaxial coupling devices specially adapted for high frequency H01R 24/40; for flat or ribbon cable connectors H01R 12/774; for coaxial cable H01R 9/05)}

H01R 13/65802 ・・・{with resilient grounding means}

H01R 13/65805 ・・・{using dielectric material made conductive, e.g. plastics material coated with metal}

H01R 13/65807 ・・・{and comprising shielding between neighboring signal paths}

H01R 13/6581 ・・・Shield structure

H01R 13/6582 ・・・・with resilient means for engaging mating connector

H01R 13/6583 ・・・・・with separate conductive resilient members between mating shield members

H01R 13/6584 ・・・・・・formed by conductive elastomeric members, e.g. flat gaskets or O-rings

H01R 13/6585 ・・・・Shielding material individually surrounding or interposed between mutually spaced contacts

H01R 13/6586 ・・・・・for separating multiple connector modules

H01R 13/6587 ・・・・・・for mounting on PCBs

H01R 13/6588 ・・・・・with through openings for individual contacts

H01R 13/6589 ・・・・・with wires separated by conductive housing parts

H01R 13/659 ・・・・with plural ports for distinct connectors

H01R 13/6591 ・・・Specific features or arrangements of connection of shield to conductive members

H01R 13/6592 ・・・・the conductive member being a shielded cable

H01R 13/6593 ・・・・・the shield being composed of different pieces

H01R 13/6594 ・・・・the shield being mounted on a PCB and connected to conductive members

H01R 13/6595 ・・・・・with separate members fixing the shield to the PCB

H01R 13/6596 ・・・・the conductive member being a metal grounding panel

H01R 13/6597 ・・・・the conductive member being a contact of the connector

H01R 13/6598 ・・・Shield material

H01R 13/6599 ・・・・Dielectric material made conductive, e.g. plastic material coated with metal

H01R 13/66 ・Structural association with built-in electrical component (Coupling devices having concentrically or coaxially-arranged contacts H01R 24/38-24/56)

H01R 13/6608 ・・{with built-in single component (H01R 13/68, H01R 13/70 take precedence)}

H01R 13/6616 ・・・{with resistor}

H01R 13/6625 ・・・{with capacitive component}

H01R 13/6633 ・・・{with inductive component, e.g. transformer}

H01R 13/6641 ・・・{with diode (with LED H01R 13/717L)}

H01R 13/665 ・・{with built-in electronic circuit (H01R 13/70, H01R 13/719 take precedence)}

H01R 13/6658 ・・・{on printed circuit board (H01R 13/6666 to H01R 13/6691 take precedence)}

H01R 13/6666 ・・・{with built-in overvoltage protection}

H01R 13/6675 ・・・{with built-in power supply}

H01R 13/6683 ・・・{with built-in sensor}

H01R 13/6691 ・・・{with built-in signalling means (H01R 13/717 takes precedence)}

H01R 13/68 ・・with built-in fuse

H01R 13/684 ・・・the fuse being removable

H01R 13/688 ・・・・with housing part adapted for accessing the fuse

H01R 13/692 ・・・・・Turnable housing part

H01R 13/696 ・・・the fuse being integral with the terminal, e.g. pin or socket

H01R 13/70 ・・with built-in switch

H01R 13/701 ・・・{the switch being actuated by an accessory, e.g. cover, locking member}

H01R 13/703 ・・・operated by engagement or disengagement of coupling parts, {e.g. dual-continuity coupling part}(H01R 13/71 takes precedence)

H01R 13/7031 ・・・・{Shorting, shunting or bussing of different terminals interrupted or effected on engagement of coupling part, e.g. for ESD protection, line continuity}

H01R 13/7032 ・・・・・{making use of a separate bridging element directly cooperating with the terminals}

H01R 13/7033 ・・・・・{making use of elastic extensions of the terminals}

H01R 13/7034 ・・・・・{the terminals being in direct electric contact separated by double sided connecting element (for printed circuit boards H01R 12/7094)}

H01R 13/7035 ・・・・{comprising a separated limit switch}

H01R 13/7036 ・・・・{the switch being in series with coupling part, e.g. dead coupling, explosion proof coupling}

H01R 13/7037 ・・・・・{making use of a magnetically operated switch}

H01R 13/7038 ・・・・・{making use of a remote controlled switch, e.g. relais, solid state switch activated by the engagement of the coupling parts}

H01R 13/7039 ・・・・{the coupling part with coding means activating the switch to establish different circuits}

H01R 13/707 ・・・interlocked with contact members or counterpart

H01R 13/71 ・・・Contact members of coupling parts operating as switch, {e.g. linear or rotational movement required after mechanical engagement of coupling part to establish electrical connection}

H01R 13/713 ・・・the switch being a safety switch

H01R 13/7132 ・・・・{having ejecting mechanisms}

H01R 13/7135 ・・・・{with ground fault protector (H01R 13/7132 takes precedence)}

H01R 13/7137 ・・・・{with thermal interrupter (H01R 13/7132 takes precedence)}

H01R 13/717 ・・with built-in light source

H01R 13/7172 ・・・{Conduits for light transmission}

H01R 13/7175 ・・・{Light emitting diodes (LEDs)}

H01R 13/7177 ・・・{filament or neon bulb}

H01R 13/719 ・・specially adapted for high frequency, e.g. with filters

H01R 13/7193 ・・・with ferrite filters

H01R 13/7195 ・・・with planar filters with openings for contacts

H01R 13/7197 ・・・with filters integral with or fitted onto contacts, e.g. tubular filters

H01R 13/72 ・Means for accommodating flexible lead within the holder

H01R 13/73 ・Means for mounting coupling parts to apparatus or structures, e.g. to a wall

H01R 13/74 ・・Means for mounting coupling parts in openings of a panel

H01R 13/741 ・・・{using snap fastening means}

H01R 13/743 ・・・・{integral with the housing}

H01R 13/745 ・・・・{separate from the housing}

H01R 13/746 ・・・{using a screw ring}

H01R 13/748 ・・・{using one or more screws (H01R 13/746 takes precedence)}

H01R 23/00 Two-part coupling devices having four or more poles, with or without additional protective earth connection; Separate parts thereof

H01R 23/005 ・{comprising means for reducing cross-talk, e.g. special layout of conductors between input and output pins (by shielding of neighboring signal paths H01R 13/65807, H01R 23/688; twisted pair cables H01B 11/02; in line transmission systems H04B 3/32; ground circuit layout on printed circuit boards H05K 9/0039)}

H01R 23/02 ・having parallely-arranged contacts for sliding engagement with their counter-contacts

H01R 23/025 ・・{sliding engagement on one side only, e.g. modular jack type}

H01R 23/10 ・・wherein one coupling part is secured to wire or cable and the other part is secured to apparatus or structure

H01R 23/26 ・having concentrically or coaxially arranged contacts

H01R 23/27 ・Hermaphroditic coupling devices {(hermaphroditic contact members H01R 13/28)}

H01R 23/66 ・for connection to or between flat or ribbon cables

H01R 23/661 ・・{Details, e.g. strain relieving means, retainers}

H01R 23/662 ・・・{Earth or shield arrangements (in general H01R 13/648)}

H01R 23/664 ・・{Coupling parts carrying pins, blades or analogous contacts (H01R 23/667, H01R 23/668 take precedence)}

H01R 23/665 ・・{Coupling parts carrying sockets, clips or analogous countercontacts (H01R 23/667, H01R 23/668 take precedence)}

H01R 23/667 ・・{for connection of flat or ribbon cables between each other, e.g. adaptors}

H01R 23/668 ・・{for connection of flat or ribbon cables to a printed circuit board}

H01R 23/68 ・for connection to or between printed circuits; {Non printed connecting arrangements of printed circuit boards (PCB's)(H01R 23/668 takes precedence)}

H01R 23/6806 ・・{for connection between PCB and component, e.g. display (plugging components in general H05K 7/10)}

H01R 23/6813 ・・{with low or zero insertion force}

H01R 23/682 ・・・{and with pivoting of PCB after insertion}

H01R 23/6826 ・・・{Contact pressure producing means activated after insertion of PCB}

H01R 23/6833 ・・・・{acting linearly (H01R 23/6846, H01R 23/6853 and H01R 23/686 take precedence)}

H01R 23/684 ・・・・{acting by rotation or by pivoting (H01R 23/6846, H01R 23/6853 and H01R 23/686 take precedence)}

H01R 23/6846 ・・・・{acting automatically by insertion of PCB}

H01R 23/6853 ・・・・{fluid activated}

H01R 23/686 ・・・・{activated by shape memory material}

H01R 23/6866 ・・{Arrangements for power supply bus-bars}

H01R 23/6873 ・・{adapted for high frequency}

H01R 23/688 ・・・{and comprising shielding between neighboring signal paths}

H01R 23/6886 ・・{Coupling parts supported only by cooperation with PCB}

H01R 23/6893 ・・{Connectors for contacting one or more arrays of pins or sockets mounted on a PCB (counterparts presenting such arrays H01R 23/7073)}

H01R 23/70 ・・co-operating with the edge of the printed circuit or with a counterpart provided on the edge of the printed circuit {(H01R 23/6813 takes precedence); Counterparts therefor; Special features of the edge of the board}

H01R 23/7005 ・・・{Guiding, mounting, polarizing or locking means; Extractors (for printed circuit boards H05K)}

H01R 23/701 ・・・・{locking or fixing a connector to a PCB}

H01R 23/7015 ・・・・・{Snap means}

H01R 23/7021 ・・・・・・{integral with the coupling device}

H01R 23/7026 ・・・・・・{not integral with the coupling device}

H01R 23/7031 ・・・・・{involving non-elastic deformation, e.g. plastic deformation, melting (H01R 23/7057 takes precedence)}

H01R 23/7036 ・・・・・{Gluing or taping}

H01R 23/7042 ・・・・・{with a fastener through a screw hole in the coupling device}

H01R 23/7047 ・・・・・{characterised by the locating members}

H01R 23/7052 ・・・・・{characterised by the movement, e.g. pivoting, camming or translating parallel to the PCB}

H01R 23/7057 ・・・・・{Press fitting}

H01R 23/7063 ・・・・・{Soldering or welding}

H01R 23/7068 ・・・{cooperating directly with the edge of the PCB}

H01R 23/7073 ・・・{Counterparts, e.g. containing pins forming a right angle, mounted on the edge of the PCB}

H01R 23/7078 ・・・・{Counterparts presenting a contact carrying strip, e.g. edge-like strip}

H01R 23/7084 ・・・・{Counterparts presenting arrays of sockets}

H01R 23/7089 ・・・・{Contact members without an insulating housing provided on the edge of the PCB}

H01R 23/7094 ・・・{with switch operated by engagement of PCB}

H01R 23/72 ・・co-operating with the surface of the printed circuit or with a counterpart provided on the surface of the printed circuit ({H01R 23/6813}, H01R 23/70 take precedence)

H01R 23/722 ・・・{with contacts abutting directly the printed circuit; Button contacts therefor provided on the printed circuit}

H01R 23/725 ・・・{Counterparts provided on the PCB}

H01R 23/727 ・・・・{Contact members provided on the PCB without an insulating housing (contacts for abutting H01R 23/722)}

H01R 24/00 Two-part coupling devices, or either of their cooperating parts, characterised by their overall structure (specially adapted for printed circuits, flat or ribbon cables, or like structures H01R 12/00; specially adapted for supporting apparatus H01R 33/00)

H01R 24/005 ・{requiring successive relative motions to complete the coupling, e.g. bayonet type}

H01R 24/20 ・Coupling parts carrying sockets, clips or analogous contacts and secured only to wire or cable

H01R 24/22 ・・with additional earth or shield contacts

H01R 24/28 ・Coupling parts carrying pins, blades or analogous contacts and secured only to wire or cable

H01R 24/30 ・・with additional earth or shield contacts

H01R 24/38 ・having concentrically or coaxially arranged contacts

H01R 24/40 ・・specially adapted for high frequency

H01R 24/42 ・・・comprising impedance matching means or electrical components, e.g. filters or switches

H01R 24/44 ・・・・comprising impedance matching means

H01R 24/46 ・・・・comprising switches

H01R 24/48 ・・・・comprising protection devices, e.g. overvoltage protection

H01R 24/50 ・・・mounted on a PCB [Printed Circuit Board]

H01R 24/52 ・・・mounted in or to a panel or structure

H01R 24/525 ・・・・{Outlets}

H01R 24/54 ・・・Intermediate parts, e.g. adapters, splitters or elbows

H01R 24/542 ・・・・{Adapters}

H01R 24/545 ・・・・{Elbows}

H01R 24/547 ・・・・{Splitters}

H01R 24/56 ・・・specially adapted to a specific shape of cables, e.g. corrugated cables, twisted pair cables, cables with two screens or hollow cables

H01R 24/562 ・・・・{Cables with two screens}

H01R 24/564 ・・・・{Corrugated cables}

H01R 24/566 ・・・・{Hollow cables}

H01R 24/568 ・・・・{Twisted pair cables}

H01R 24/58 ・Contacts spaced along longitudinal axis of engagement

H01R 24/60 ・Contacts spaced along planar side wall transverse to longitudinal axis of engagement

H01R 24/62 ・・Sliding engagements with one side only, e.g. modular jack coupling devices

H01R 24/64 ・・・for high frequency, e.g. RJ 45

H01R 24/66 ・with pins, blades or analogous contacts and secured to apparatus or structure, e.g. to a wall

H01R 24/68 ・・mounted on directly pluggable apparatus

H01R 24/70 ・・with additional earth or shield contacts

H01R 24/76 ・with sockets, clips or analogous contacts and secured to apparatus or structure, e.g. to a wall

H01R 24/78 ・・with additional earth or shield contacts

H01R 24/84 ・Hermaphroditic coupling devices

H01R 24/86 ・Parallel contacts arranged about a common axis

H01R 25/00 Coupling parts adapted for simultaneous co-operation with two or more identical counterparts, e.g. for distributing energy to two or more circuits (supported only by co-operation with a counterpart H01R 31/00; with a holder adapted for supporting apparatus to which its counterpart is attached H01R 33/88)

H01R 25/003 ・{the coupling part being secured only to wires or cables}

H01R 25/006 ・{the coupling part being secured to apparatus or structure, e.g. duplex wall receptacle}

H01R 25/14 ・Rails or bus-bars constructed so that the counterparts can be connected thereto at any point along their length, {e.g. track lighting systems}(installation of bus bars H02G 5/00)

H01R 25/142 ・・{Their counterparts}

H01R 25/145 ・・{Details, e.g. end pieces or joints(H01R 25/147 takes precedence)}

H01R 25/147 ・・{Low voltage devices, i.e. safe to touch live conductors}

H01R 25/16 ・Rails or bus-bars provided with a plurality of discrete connecting locations for counterparts ([N: protective tubings or conduits H02G 3/00; installations of bus-bars H02G 5/00)

H01R 25/161 ・・{Details}

H01R 25/162 ・・・{Electrical connections between or with rails or bus-bars (rails having primarily a non electrical function H01R 4/64)}

H01R 25/164 ・・{Connecting locations formed by flush mounted apparatus}

H01R 25/165 ・・{Connecting locations formed by surface mounted apparatus}

H01R 25/167 ・・{Connecting locations formed by staggering mounted apparatus}

H01R 25/168 ・・{the connecting locations being situated away from the rail or bus-bar}

H01R 27/00 Coupling parts adapted for co-operation with two or more dissimilar counterparts ({for dissimilar contact members H01R 13/35}; supported only by co-operation with a counterpart H01R 31/00; with a holder adapted for supporting apparatus to which its counterpart is attached H01R 33/90)

H01R 27/02 ・for simultaneous co-operation with two or more {dissimilar} counterparts

H01R 29/00 Coupling parts for selective co-operation with a counterpart in different ways to establish different circuits, e.g. for voltage selection, for series-parallel selection, {programmable connectors}

H01R 31/00 Coupling parts supported only by co-operation with counterpart

H01R 31/005 ・{Intermediate parts for distributing signals}

H01R 31/02 ・Intermediate parts for distributing energy to two or more circuits in parallel, e.g. splitter (for linking coupling parts that cannot co-operated H01R 31/06; with a holder adapted for supporting apparatus to which its counterpart is attached H01R 33/92)

H01R 31/06 ・Intermediate parts for linking two coupling parts, e.g. adapter (with a holder adapted for supporting apparatus to which its counterpart is attached H01R 33/94)

H01R 31/065 ・・{with built-in electric apparatus}

H01R 31/08 ・Short circuiting members for bridging contacts in a counterpart (insulating members for separating contacts in a counterpart H01H 27/04)

H01R 31/085 ・・{Short circuiting bus-strips}

H01R 33/00 Coupling devices in which a holder is adapted for supporting apparatus to which its counterpart is attached; Separate parts thereof (structural association of counterpart with specific apparatus, see the relevant subclass for the apparatus)

H01R 33/02 ・Single-pole devices, e.g. holder for supporting one end of a tubular incandescent or neon lamp

H01R 33/05 ・Two-pole devices

H01R 33/06 ・・with two current-carrying pins, blades or analogous contacts, having their axes parallel to each other

H01R 33/065 ・・・{for supporting starter switches}

H01R 33/08 ・・・for supporting tubular fluorescent lamp

H01R 33/0809 ・・・・{having contacts on one side only}

H01R 33/0818 ・・・・{for a plurality of lamps}

H01R 33/0827 ・・・・{characterised by the contacts}

H01R 33/0836 ・・・・{characterised by the lamp holding means}

H01R 33/0845 ・・・・・{with axially resilient member}

H01R 33/0854 ・・・・・{with lamp rotating means}

H01R 33/0863 ・・・・{characterised by the mounting means}

H01R 33/0872 ・・・・・{for mounting in an opening of a structure}

H01R 33/0881 ・・・・{composed of different pieces}

H01R 33/089 ・・・・{integral with starter holding structure (H01R 33/065 for starters only)}

H01R 33/09 ・・・for baseless lamp bulb

H01R 33/18 ・・having only abutting contacts

H01R 33/20 ・・having concentrically or coaxially arranged contacts

H01R 33/205 ・・・{secured to structure or printed circuit board}

H01R 33/22 ・・for screw type base, e.g. for lamp

H01R 33/225 ・・・{secured to structure or printed circuit board}

H01R 33/46 ・・for bayonet type base

H01R 33/465 ・・・{secured to structure or printed circuit board}

H01R 33/72 ・Three-pole devices

H01R 33/74 ・Devices having four or more poles, {e.g. holders for compact fluorescent lamps}

H01R 33/76 ・・Holders with sockets, clips, or analogous contacts adapted for axially-sliding engagement with parallely-arranged pins, blades, or analogous contacts on counterpart, e.g. electronic tube socket

H01R 33/7607 ・・・{the parallel terminal pins having a circular disposition}

H01R 33/7614 ・・・・{the terminals being connected to individual wires}

H01R 33/7621 ・・・・・{the wires being connected using screw, clamp, wrap or spring connection}

H01R 33/7628 ・・・・・{the wires being connected using solder}

H01R 33/7635 ・・・・{the terminals being collectively connected, e.g. to a PCB}

H01R 33/7642 ・・・・・{socket snap fastened in an opening of a PCB}

H01R 33/765 ・・・{the terminal pins having a non-circular disposition}

H01R 33/7657 ・・・{characterised by keying or marking means}

H01R 33/7664 ・・・{having additional guiding, adapting, shielding, anti-vibration or mounting means}

H01R 33/7671 ・・・{having multiple positions or sockets, e.g. stacked sockets while mounting}

H01R 33/7678 ・・・{having a separated part for spark preventing means}

H01R 33/7685 ・・・{having internal socket contact by abutting}

H01R 33/7692 ・・・{for supporting a tubular fluorescent lamp (for two-pole devices H01R 33/06)}

H01R 33/88 ・adapted for simultaneous co-operation with two or more identical counterparts

H01R 33/90 ・adapted for co-operation with two or more dissimilar counterparts

H01R 33/92 ・Holders formed as intermediate parts for distributing energy in parallel through two or more counterparts at least one of which is attached to apparatus to be held

H01R 33/94 ・Holders formed as intermediate parts for linking a counter-part to a coupling part

H01R 33/942 ・・{for tubular fluorescent lamps}

H01R 33/945 ・Holders with built-in electrical component

H01R 33/9453 ・・{for screw type coupling devices}

H01R 33/9456 ・・{for bayonet type coupling devices}

H01R 33/95 ・・with fuse; with thermal switch

H01R 33/955 ・・with switch operated manually and independent of engagement or disengagement of coupling

H01R 33/9555 ・・・{for screw type coupling devices}

H01R 33/96 ・・with switch operated by engagement or disengagement of coupling

H01R 33/962 ・・・{for screw type coupling devices}

H01R 33/965 ・Dustproof, splashproof, drip-proof, waterproof, or flameproof holders

H01R 33/9651 ・・{for screw type coupling devices}

H01R 33/9653 ・・・{neither pole becoming electrically connected until the coupling parts are substantially engaged}

H01R 33/9655 ・・{for bayonet type coupling devices}

H01R 33/9656 ・・・{neither pole becoming electrically connected until the coupling parts are substantially engaged}

H01R 33/9658 ・・{for tubular fluorescent lamps}

H01R 33/97 ・Holders with separate means to prevent loosening of the coupling or unauthorized removal of apparatus held

H01R 33/971 ・・{for screw type coupling devices}

H01R 33/973 ・・{for bayonet type coupling devices}

H01R 33/975 ・Holders with resilient means for protecting apparatus against vibrations or shocks

H01R 33/9753 ・・{for screw type coupling devices}

H01R 33/9756 ・・{for bayonet type coupling devices}

H01R 35/00 Flexible or turnable line connectors, {i.e. the rotation angle being limited}(rotary current collectors, distributors H01R 39/00; {arrangement of these connectors in vehicle steering wheels B60R 16/027; arrangements of electric cables or lines between relatively movable parts H02G 11/00})

H01R 35/02 ・Flexible line connectors {without frictional contact members}

H01R 35/025 ・・{having a flexible conductor wound around a rotation axis}

H01R 35/04 ・Turnable line connectors with limited rotation angle {with frictional contact members}

H01R 39/00 Rotary current collectors, distributors, or interrupters (cam-operated switches H01H 19/00; structural association with dynamo-electric machine H02K 13/00)

H01R 39/02 ・Details {for dynamo electric machines (for current collectors not particularly for dynamo electric machines H01R 39/60, H01R 39/64)}

H01R 39/022 ・・{characterised by the materials used, e.g. ceramics}

H01R 39/025 ・・・{Conductive materials}

H01R 39/027 ・・・{Insulating materials}

H01R 39/04 ・・Commutators (wherein the segments are formed by extensions of dynamo-electric machine winding H02K)

H01R 39/045 ・・・{the commutators being made of carbon}

H01R 39/06 ・・・other than with external cylindrical contact surface, e.g. flat commutators

H01R 39/08 ・・Slip-rings

H01R 39/085 ・・・{the slip-rings being made of carbon}

H01R 39/10 ・・・other than with external cylindrical contact surface, e.g. flat slip-rings

H01R 39/12 ・・・using bearing or shaft surface as contact surface

H01R 39/14 ・・Fastenings of commutators or slip-rings to shafts

H01R 39/16 ・・・by means of moulded or cast material applied during or after assembly

H01R 39/18 ・・Contacts for co-operation with commutator or slip-ring, e.g. contact brush

H01R 39/20 ・・・characterised by the material thereof

H01R 39/22 ・・・・incorporating lubricating or polishing ingredient

H01R 39/24 ・・・Laminated contacts; Wire contacts, e.g. metallic brush, carbon fibres

H01R 39/26 ・・・Solid sliding contacts, e.g. carbon brush

H01R 39/27 ・・・・End caps on carbon brushes to transmit spring pressure

H01R 39/28 ・・・Roller contacts; Ball contacts

H01R 39/30 ・・・Liquid contacts

H01R 39/32 ・・Connections of conductor to commutator segment

H01R 39/34 ・・Connections of conductor to slip-ring

H01R 39/36 ・・Connections of cable or wire to brush

H01R 39/38 ・・Brush holders

H01R 39/381 ・・・{characterised by the application of pressure to brush}

H01R 39/383 ・・・{characterised by the electrical connection to the brush holder}

H01R 39/385 ・・・{Means for mechanical fixation of the brush holder}

H01R 39/386 ・・・・{Electrically insulated bolts}

H01R 39/388 ・・・{characterised by the material of the brush holder}

H01R 39/39 ・・・wherein the brush is fixedly mounted in the holder

H01R 39/40 ・・・enabling brush movement within holder during current collection

H01R 39/41 ・・・Cartridge type

H01R 39/415 ・・・・with self-recoiling spring

H01R 39/42 ・・Devices for lifting brushes

H01R 39/44 ・・Devices for shifting brushes

H01R 39/46 ・・Auxiliary means for improving current transfer, or for reducing or preventing sparking or arcing

H01R 39/48 ・・・by air blast; by surrounding collector with non-conducting liquid or gas

H01R 39/50 ・・・Barriers placed between brushes

H01R 39/52 ・・・by use of magnets

H01R 39/54 ・・・by use of impedance between brushes or segments

H01R 39/56 ・・Devices for lubricating or polishing slip-rings or commutators during operation of the collector

H01R 39/58 ・・Means structurally associated with the current collector for indicating condition thereof, e.g. for indicating brush wear

H01R 39/59 ・・Means structurally associated with the brushes for interrupting current (H01R 39/58 takes precedence)

H01R 39/60 ・Devices for interrupted current collection, e.g. commutating device, distributor, interrupter (self-interrupters H01H, e.g. H01H 51/34)

H01R 39/62 ・・with more than one brush co-operating with the same set of segments

H01R 39/64 ・Devices for uninterrupted current collection

H01R 39/643 ・・{through ball or roller bearing}

H01R 39/646 ・・{through an electrical conductive fluid}

H01R 41/00 Non-rotary current collectors for maintaining contact between moving and stationary parts of an electric circuit (end pieces terminating in a hook or the like H01R 11/12; current collectors for power supply lines of electrically-propelled vehicles B60L 5/00)

H01R 41/02 ・Devices for interrupted current collection, e.g. distributor (electrically-operated selector switches H01H 67/00)

H01R 43/00 Apparatus or processes specially adapted for manufacturing, assembling, maintaining, or repairing of line connectors or current connectors or for joining electric conductors (of trolley lines B60M 1/28; joining cables H02G 1/14)

H01R 43/002 ・{Maintenance of line connectors, e.g. cleaning}

H01R 43/005 ・{for making dustproof, splashproof, drip-proof, waterproof, or flameproof connection, coupling, or casing}

H01R 43/007 ・{for elastomeric connecting elements}

H01R 43/01 ・for connecting unstripped conductors to contact members having insulation cutting edges

H01R 43/015 ・・{Handtools}

H01R 43/02 ・for soldered or welded connections (soldering or welding in general B23K)

H01R 43/0207 ・・{Ultrasonic-, H.F.-, cold- or impact welding}

H01R 43/0214 ・・{Resistance welding (H01R 43/0228 takes precedence)}

H01R 43/0221 ・・{Laser welding (H01R 43/0228 takes precedence)}

H01R 43/0228 ・・{without preliminary removing of insulation before soldering or welding}

H01R 43/0235 ・・{for applying solder (H01R 43/0228 takes precedence)}

H01R 43/0242 ・・{comprising means for controlling the temperature, e.g. making use of the curie point}

H01R 43/0249 ・・{for simultaneous welding or soldering of a plurality of wires to contact elements}

H01R 43/0256 ・・{for soldering or welding connectors to a printed circuit board}

H01R 43/0263 ・・{for positioning or holding parts during soldering or welding process}

H01R 43/027 ・for connecting conductors by clips

H01R 43/0275 ・・{by using explosive force}

H01R 43/033 ・for wrapping or unwrapping wire connections

H01R 43/0335 ・・{for unwraping}

H01R 43/04 ・for forming connections by deformation, e.g. crimping tool

H01R 43/042 ・・Hand tools for crimping

H01R 43/0421 ・・・{combined with other functions, e.g. cutting}

H01R 43/0422 ・・・{operated by an explosive force}

H01R 43/0424 ・・・{with more than two radially actuated mandrels}

H01R 43/0425 ・・・{with mandrels actuated in axial direction to the wire}

H01R 43/0427 ・・・{fluid actuated hand crimping tools}

H01R 43/0428 ・・・{Power-driven hand crimping tools}

H01R 43/045 ・・・with contact member feeding mechanism

H01R 43/048 ・・Crimping apparatus or processes (43/042 takes precedence)

H01R 43/0482 ・・・{combined with contact member manufacturing mechanism}

H01R 43/0484 ・・・{for eyelet contact members}

H01R 43/0486 ・・・{with force measuring means}

H01R 43/0488 ・・・{with crimp height adjusting means}

H01R 43/05 ・・・with wire-insulation stripping

H01R 43/052 ・・・with wire-feeding mechanism

H01R 43/055 ・・・with contact member feeding mechanism

H01R 43/058 ・・Crimping mandrels

H01R 43/0585 ・・・{for crimping apparatus with more than two radially actuated mandrels}

H01R 43/06 ・Manufacture of commutators

H01R 43/08 ・・in which segments are not separated until after assembly

H01R 43/10 ・Manufacture of slip-rings

H01R 43/12 ・Manufacture of brushes

H01R 43/14 ・Maintenance of current collectors, e.g. reshaping of brushes, cleaning of commutators

H01R 43/16 ・for manufacturing contact members, e.g. by punching and by bending

H01R 43/18 ・for manufacturing bases or cases for contact members

H01R 43/20 ・for assembling or disassembling contact members with insulating base, case or sleeve

H01R 43/205 ・・{with a panel or printed circuit board}

H01R 43/22 ・・Hand tools

H01R 43/24 ・・Assembling by moulding on contact members

H01R 43/26 ・for engaging or disengaging the two parts of a coupling device (structural association with two-part coupling device H01R 13/629)

H01R 43/28 ・for wire processing before connecting to contact members (H01R 43/02 to H01R 43/26 take precedence)

H01R 2004/00 Electrically-conductive connections between two or more conductive members in direct contact and means for effecting or maintaining such contact (details of disengageable contacts of two-part coupling devices H01R 13/00; two-part coupling devices H01R 12/70, H01R 24/00 - H01R 33/00; flexible or turnable line connectors H01R 35/00; non rotary current collectors H01R 41/00)

H01R 2004/10 ・effected solely by twisting, wrapping, bending, crimping, or other permanent deformation

H01R 2004/18 ・・by crimping {(H01R 4/01, H01R 4/2495 take precedence; for coaxial cables H01R 9/0518)}

H01R 2004/181 ・・・using memory material

H01R 2101/00 One pole

H01R 2103/00 Two poles

H01R 2105/00 Three poles

H01R 2107/00 Four or more poles

H01R 2201/00 Connectors or connections adapted for particular applications

H01R 2201/02 ・for antennas

H01R 2201/04 ・for network, e.g. LAN connectors

H01R 2201/06 ・for computer periphery

H01R 2201/08 ・for halogen lamps

H01R 2201/10 ・for dynamoelectric machines

H01R 2201/12 ・for medicine and surgery

H01R 2201/14 ・seismic connectors

H01R 2201/16 ・for telephony

H01R 2201/18 ・for television

H01R 2201/20 ・for testing or measuring purposes

H01R 2201/22 ・for transformers or coils

H01R 2201/24 ・for radio transmission

H01R 2201/26 ・for vehicles