WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

H02K　DYNAMO-ELECTRIC MACHINES (measuring instruments G01; dynamo-electric relays H01H 53/00; conversion of dc or ac input power into surge output power {H03K 3/53}; loudspeakers, microphones, gramophone pick-ups or like acoustic electromechanical transducers H04R)

H02K 1/00 Details of the magnetic circuit (magnetic circuits or magnets in general, magnetic circuits for transformers for power supply H01F; magnetic circuits for relays H01H 50/16)

H02K 1/02 ・characterised by the magnetic material

H02K 1/04 ・characterised by the material used for insulating the magnetic circuit or parts thereof (insulation of windings H02K 3/30)

H02K 1/06 ・characterised by the shape, form, or construction

H02K 1/08 ・・Salient poles

H02K 1/10 ・・・Commutating poles

H02K 1/12 ・・Stationary parts of the magnetic circuit

H02K 1/14 ・・・Stator cores with salient poles

H02K 1/141 ・・・・{consisting of C-shaped cores}

H02K 1/143 ・・・・・{of the horse-shoe type}

H02K 1/145 ・・・・{having an annular coil, e.g. of the claw-pole type}

H02K 1/146 ・・・・{consisting of a generally annular yoke with salient poles}

H02K 1/148 ・・・・・{Sectional cores (H02K 1/141 takes precedence)}

H02K 1/16 ・・・Stator cores with slots for windings

H02K 1/165 ・・・・{Shape, form or location of the slots}

H02K 1/17 ・・・Stator cores with permanent magnets

H02K 1/18 ・・・Means for mounting or fastening magnetic stationary parts on to, or to, the stator structures

H02K 1/182 ・・・・{to stators axially facing the rotor, i.e. with axial or conical air gap}

H02K 1/185 ・・・・{to outer stators}

H02K 1/187 ・・・・{to inner stators}

H02K 1/20 ・・・with channels or ducts for flow of cooling medium

H02K 1/22 ・・Rotating parts of magnetic circuit

H02K 1/223 ・・・{Rotor cores with windings and permanent magnets (for additional excitation in synchronous motors or generators H02K 21/042; in synchronous motors having additional short-circuited winding for starting as an asynchronous motor H02K 21/46)}

H02K 1/226 ・・・・{of the claw-pole type}

H02K 1/24 ・・・Rotor cores with salient poles; {Variable reluctance rotors}

H02K 1/243 ・・・・{of the claw-pole type}

H02K 1/246 ・・・・{Variable reluctance rotors}

H02K 1/26 ・・・Rotor cores with slots for windings

H02K 1/265 ・・・・{Shape, form or location of the slots}

H02K 1/27 ・・・Rotor cores with permanent magnets {(rotor cores for synchronous machines with means for mechanical adjustment of the excitation flux H02K 21/021)}

H02K 1/2706 ・・・・{Inner rotor}

H02K 1/2713 ・・・・・{where the magnetisation axis of the magnets is axial}

H02K 1/272 ・・・・・{where the magnetisation axis of the magnets is radial or tangential}

H02K 1/2726 ・・・・・・{consisting of a single magnet or of a plurality of axially juxtaposed single magnets}

H02K 1/2733 ・・・・・・・{Annular magnets}

H02K 1/274 ・・・・・・{consisting of a plurality of circumferentially positioned magnets}

H02K 1/2746 ・・・・・・・{consisting of magnets arranged with the same polarity}

H02K 1/2753 ・・・・・・・{consisting of magnets or groups of magnets arranged with alternating polarity}

H02K 1/276 ・・・・・・・・{Magnets embedded in the magnetic core}

H02K 1/2766 ・・・・・・・・・{having a flux concentration effect}

H02K 1/2773 ・・・・・・・・・・{consisting of tangentially magnetized radial magnets}

H02K 1/278 ・・・・・・・・{Surface mounted magnets; Inset magnets}

H02K 1/2786 ・・・・{Outer rotor}

H02K 1/2793 ・・・・{Rotor axially facing stator}

H02K 1/28 ・・・Means for mounting or fastening rotating magnetic parts on to, or to, the rotor structures

H02K 1/30 ・・・・using intermediate part or parts, e.g. spider

H02K 1/32 ・・・with channels or ducts for flow of cooling medium

H02K 1/325 ・・・・{between salient poles}

H02K 1/34 ・・Reciprocating, oscillating, or vibrating part of magnetic circuit

H02K 3/00 Details of windings (coils in general H01F 5/00)

H02K 3/02 ・Windings characterised by the conductor material (conductors in general H01B 1/00, H01B 5/00)

H02K 3/04 ・Windings characterised by the conductor shape, form, or construction, e.g. with bar conductor

H02K 3/12 ・・arranged in slots

H02K 3/14 ・・・with transposed conductors, e.g. twisted conductor

H02K 3/16 ・・・for damping, commutating, or other auxiliary purposes

H02K 3/18 ・・Windings for salient poles

H02K 3/20 ・・・for damping, commutating, or other auxiliary purposes

H02K 3/22 ・・consisting of hollow conductors

H02K 3/24 ・・with channels or ducts between the conductors for flow of cooling medium

H02K 3/26 ・・consisting of printed conductors

H02K 3/28 ・・Layout of windings or of connections between windings (windings for pole-changing H02K 17/06, H02K 17/14, H02K 19/12, H02K 19/32)

H02K 3/30 ・Windings characterised by the insulating material (insulating bodies in general H01B 3/00, H01B 17/00)

H02K 3/32 ・Windings characterised by the shape, form, or construction of the insulation {(H02K 3/46 takes precedence)}

H02K 3/325 ・・{for windings on salient poles, such as claw-shaped poles}

H02K 3/34 ・・between conductors or between conductor and core, e.g. slot insulation

H02K 3/345 ・・・{between conductor and core, e.g. slot insulation}

H02K 3/38 ・・around winding heads, equalising connectors, or connections thereto

H02K 3/40 ・・for high voltage, e.g. affording protection against corona

H02K 3/42 ・Means for preventing or reducing eddy-current losses in the winding heads, e.g. by shielding

H02K 3/44 ・Protection against moisture or chemical attack; Windings specially adapted for operation in liquid or gas

H02K 3/46 ・Fastening of windings on stator or rotor structure

H02K 3/47 ・・Air-gap windings, i.e. iron-free windings

H02K 3/48 ・・in slots

H02K 3/487 ・・・Slot-closing devices

H02K 3/493 ・・・・where the devices are magnetic

H02K 3/50 ・・Fastening of winding heads, equalising connectors, or connections thereto {(H02K 3/52 takes precedence)}

H02K 3/505 ・・・{for large machine windings, e.g. bar windings (H02K 3/51 takes precedence)}

H02K 3/51 ・・・applicable to rotors only

H02K 3/52 ・・Fastening salient pole windings or connections thereto

H02K 3/521 ・・・{applicable to stators only}

H02K 3/522 ・・・・{for generally annular cores with salient poles}

H02K 3/524 ・・・・{for U-shaped, E-shaped or similarly shaped cores}

H02K 3/525 ・・・・{Annular coils, e.g. for cores of the claw-pole type}

H02K 3/527 ・・・{applicable to rotors only}

H02K 3/528 ・・・・{of the claw-pole type}

H02K 5/00 Casings; Enclosures; Supports (casings for electric apparatus in general H05K 5/00)

H02K 5/02 ・Casings or enclosures characterised by the material thereof

H02K 5/04 ・Casings or enclosures characterised by the shape, form or construction thereof

H02K 5/06 ・・Cast metal casings

H02K 5/08 ・・Insulating casings

H02K 5/10 ・・affording protection from ingress, e.g. of water, of fingers {(means for protecting brushes or brush holders H02K 5/14)}

H02K 5/12 ・・specially adapted for operating in liquid or gas (combined with cooling arrangements H02K 9/00)

H02K 5/124 ・・・Sealing of the shaft

H02K 5/128 ・・・using air-gap sleeve or air-gap disc

H02K 5/1282 ・・・・{the partition wall in the air-gap being non cylindrical}

H02K 5/1285 ・・・・{of the submersible type}

H02K 5/132 ・・・Submersible electric motor (H02K 5/128 takes precedence; pumping installations or systems for submerged use F04D 13/08)

H02K 5/136 ・・・explosion-proof

H02K 5/14 ・・Means for supporting or protecting brushes or brush holders

H02K 5/141 ・・・{for cooperation with slip-rings}

H02K 5/143 ・・・{for cooperation with commutators}

H02K 5/145 ・・・・{Fixedly supported brushes or brush holders, e.g. leaf or leaf-mounted brushes}

H02K 5/146 ・・・・{Pivotally supported brushes or brush holders}

H02K 5/148 ・・・・{Slidably supported brushes}

H02K 5/15 ・・Mounting arrangements for bearing-shields or end plates

H02K 5/16 ・・Means for supporting bearings, e.g. insulating support, means for fitting the bearing in the bearing-shield (magnetic bearings H02K 7/09)

H02K 5/161 ・・・{radially supporting the rotary shaft at both ends of the rotor (H02K 5/165, H02K 5/167, H02K 5/173 take precedence)}

H02K 5/163 ・・・{radially supporting the rotary shaft at only one end of the rotor (H02K 5/165, H02K 5/167, H02K 5/173 take precedence)}

H02K 5/165 ・・・{radially supporting the rotor around a fixed spindle; radially supporting the rotor directly (H02K 5/167, H02K 5/173 take precedence)}

H02K 5/167 ・・・using sliding-contact or spherical cap bearings

H02K 5/1672 ・・・・{radially supporting the rotary shaft at both ends of the rotor (H02K 5/1677 takes precedence)}

H02K 5/1675 ・・・・{radially supporting the rotary shaft at only one end of the rotor (H02K 5/1677 takes precedence)}

H02K 5/1677 ・・・・{radially supporting the rotor around a fixed spindle; radially supporting the rotor directly}

H02K 5/173 ・・・using ball bearings or bearings with rolling contact

H02K 5/1732 ・・・・{radially supporting the rotary shaft at both ends of the rotor (H02K 5/1737 takes precedence)}

H02K 5/1735 ・・・・{radially supporting the rotary shaft at only one end of the rotor (H02K 5/1737 takes precedence)}

H02K 5/1737 ・・・・{radially supporting the rotor around a fixed spindle; radially supporting the rotor directly}

H02K 5/18 ・・with ribs or fins for improving heat transfer

H02K 5/20 ・・with channels or ducts for flow of cooling medium

H02K 5/22 ・・Other additional parts of casings, e.g. shaped to form connection or terminal box

H02K 5/225 ・・・{Terminal boxes or connection arrangements (specially adapted for submersible motors H02K 5/132)}

H02K 5/24 ・specially adapted for suppression or reduction of noise or vibration {(elastic means for supporting brush holders H02K 5/14; elastic means for supporting bearings H02K 5/16)}

H02K 5/26 ・Means for adjusting the casing relative to its support

H02K 7/00 Arrangements for handling mechanical energy structurally associated with the machine, e.g. structural association with mechanical driving motor or auxiliary dynamo-electric machine

H02K 7/003 ・{Couplings; Details of shafts (means for mounting rotors on shafts H02K 1/28)}

H02K 7/006 ・{Structural association of a motor or generator with the drive train of a motor vehicle}

H02K 7/02 ・Additional mass for increasing inertia, e.g. fly-wheel

H02K 7/025 ・・{for power storage}

H02K 7/04 ・Balancing means

H02K 7/06 ・Means for converting reciprocating into rotary motion or vice-versa

H02K 7/061 ・・{using rotary unbalanced masses (for generating mechanical vibrations in general B06B 1/16)}

H02K 7/063 ・・・{integrally combined with motor parts, e.g. motors with eccentric rotors}

H02K 7/065 ・・Electromechanical oscillators; Vibrating magnetic drives (in time-pieces G04C 5/00)

H02K 7/07 ・・using pawl and ratchet wheel

H02K 7/075 ・・using crankshaft or eccentric

H02K 7/08 ・Structural association with bearings (support in machine casing H02K 5/16)

H02K 7/081 ・・{specially adapted for worm gear drives (H02K 7/09 takes precedence)}

H02K 7/083 ・・{radially supporting the rotary shaft at both ends of the rotor (H02K 7/086, H02K 7/09 take precedence)}

H02K 7/085 ・・{radially supporting the rotary shaft at only one end of the rotor (H02K 7/086, H02K 7/09 take precedence)}

H02K 7/086 ・・{radially supporting the rotor around a fixed spindle; radially supporting the rotor directly (H02K 7/09 takes precedence)}

H02K 7/088 ・・・{radially supporting the rotor directly}

H02K 7/09 ・・with magnetic bearings

H02K 7/10 ・Structural association with clutches, brakes, gears, pulleys, mechanical starters

H02K 7/1004 ・・{with pulleys}

H02K 7/1008 ・・・{structurally associated with the machine rotor (H02K 7/1012 takes precedence)}

H02K 7/1012 ・・・{Machine arranged inside the pulley}

H02K 7/1016 ・・・・{Machine of the outer rotor type}

H02K 7/102 ・・with friction brakes

H02K 7/1021 ・・・{Magnetically influenced friction brakes}

H02K 7/1023 ・・・・{using electromagnets}

H02K 7/1025 ・・・・・{using axial electromagnets with generally annular air gap}

H02K 7/1026 ・・・・{using stray fields}

H02K 7/1028 ・・・・・{axially attracting the brake armature in the frontal area of the magnetic core}

H02K 7/104 ・・with eddy-current brakes

H02K 7/106 ・・with dynamo-electric brakes

H02K 7/108 ・・with friction clutches

H02K 7/1085 ・・・{Magnetically influenced friction clutches}

H02K 7/11 ・・with dynamo-electric clutches

H02K 7/112 ・・with friction clutches and brakes

H02K 7/1125 ・・・{Magnetically influenced friction clutches and brakes}

H02K 7/114 ・・with dynamo-electric clutches and brakes

H02K 7/116 ・・with gears

H02K 7/1163 ・・・{where at least two gears have non-parallel axes without having orbital motion}

H02K 7/1166 ・・・・{comprising worm and worm-wheel (structural association with bearings specially adapted for worm gear drives H02K 7/081)}

H02K 7/118 ・・with starting device

H02K 7/1185 ・・・{with a mechanical one-way direction control, i.e. with means for reversing the direction of rotation of the rotor}

H02K 7/12 ・・with auxiliary limited movement of stator, rotor, or core parts, e.g. rotor axially movable for the purpose of clutching or braking

H02K 7/125 ・・・{magnetically influenced}

H02K 7/14 ・Structural association with mechanical load, e.g. hand-held machine tool, fan ({H02K 7/006 takes precedence;}with fan or impeller for cooling the machine H02K 9/06; for suction cleaners A47L)

H02K 7/145 ・・{Hand-held machine tool}

H02K 7/16 ・・for operation above critical speed of vibration of rotating parts

H02K 7/18 ・Structural association of electric generator with mechanical driving motor, e.g. turbine (if the driving-motor aspect predominates, see the relevant subclass of section F, e.g. F03B 13/00)

H02K 7/1807 ・・{Rotary generators (H02K 7/006 takes precedence)}

H02K 7/1815 ・・・{structurally associated with reciprocating piston engines (general aspects of generating sets, e.g. housing, F02B 63/04)}

H02K 7/1823 ・・・{structurally associated with turbines or similar engines}

H02K 7/183 ・・・・{wherein the turbine is a wind turbine (adaptation of a wind turbine to an electric generator F03D 9/002)}

H02K 7/1838 ・・・・・{Generators mounted in a nacelle or similar structure of a horizontal axis wind turbine}

H02K 7/1846 ・・・{structurally associated with wheels or associated parts (dynamos arranged in the wheel hub of cycles B62J 6/12)}

H02K 7/1853 ・・・{driven by intermittent forces}

H02K 7/1861 ・・・{driven by animals or vehicles (H02K 7/1853 takes precedence)}

H02K 7/1869 ・・{Linear generators; sectional generators}

H02K 7/1876 ・・・{with reciprocating, linearly oscillating or vibrating parts}

H02K 7/1884 ・・・・{structurally associated with free piston engines}

H02K 7/1892 ・・{Generators with parts oscillating or vibrating about an axis}

H02K 7/20 ・Structural association with auxiliary dynamo-electric machine, e.g. with electric starter motor, with exciter

H02K 9/00 Systems for cooling or ventilating (channels or ducts in parts of the magnetic circuit H02K 1/20, H02K 1/32; channels or ducts in or between conductors H02K 3/22, H02K 3/24)

H02K 9/005 ・{Details of cooling systems with unspecified cooling medium flowing through channels in or between the conductors}

H02K 9/02 ・by ambient air flowing through the machine

H02K 9/04 ・・having means for generating flow of cooling medium, e.g. having fan

H02K 9/06 ・・・with fan or impeller driven by the machine shaft

H02K 9/08 ・by gaseous cooling medium circulating wholly within the machine casing (H02K 9/10 takes precedence)

H02K 9/10 ・by gaseous cooling medium flowing in closed circuit, a part of which is external to the machine casing

H02K 9/12 ・・wherein the cooling medium circulates freely within the casing

H02K 9/14 ・wherein gaseous cooling medium circulates between the machine casing and a surrounding mantle

H02K 9/16 ・・wherein the cooling medium circulates through ducts or tubes within the casing

H02K 9/18 ・・wherein the external part of the closed circuit comprises a heat exchanger structurally associated with the machine casing

H02K 9/19 ・for machines with closed casing and with closed circuit cooling using a liquid cooling medium, e.g. oil

H02K 9/193 ・・with provision for replenishing the cooling medium; with means for preventing leakage of the cooling medium

H02K 9/197 ・・in which the rotor or stator space is fluid tight, e.g. to provide for different cooling media for rotor and stator

H02K 9/20 ・・wherein the cooling medium vaporises within the machine casing

H02K 9/22 ・by solid heat conducting material embedded in, or arranged in contact with, stator or rotor, e.g. heat bridge

H02K 9/24 ・Protection against failure of cooling arrangements, e.g. due to loss of cooling medium, due to interruption of the circulation of cooling medium (circuit arrangements affording such protection H02H 7/00)

H02K 9/26 ・Structural association with machine of devices for cleaning or drying cooling medium, e.g. of filter

H02K 9/28 ・Cooling of commutators, slip-rings, or brushes, e.g. by ventilating, (current collectors in general H01R 39/00)

H02K 11/00 Structural association with measuring or protective devices or electric components, e.g. with resistor, with switch, with suppressor for radio interference {(heating or drying of machines in operational state, e.g. standstill heating H02K 15/125; structural association with auxiliary electric devices influencing the characteristic of, or controlling: asynchronous induction motors H02K 17/30; synchronous generators withoutpermanent magnets H02K 19/36; dc commutator machines or universal ac/dc commutator motors H02K 23/66; ac commutator machines H02K 27/28)}

H02K 11/0005 ・{Electric or magnetic shielding arrangements, i.e. for shielding the electrical machine, the machine components or external devices against electric or magnetic fields generated inside or outside the machine (H02K 11/02 takes precedence)}

H02K 11/001 ・{Structural association with devices for measuring, monitoring, protecting, switching}

H02K 11/0015 ・・{actuated by or sensing speed or position (specially adapted for machines having non-mechanical commutating devices H02K 29/06, H02K 29/14)}

H02K 11/0021 ・・・{using magnetic effect devices, e.g. Hall, magneto-resistive elements}

H02K 11/0026 ・・・{using optical devices}

H02K 11/0031 ・・・{using detecting coils; using the machine windings as detecting coil}

H02K 11/0036 ・・・{using mechanically actuated centrifugal switches}

H02K 11/0042 ・・{actuated by or sensing torque}

H02K 11/0047 ・・{actuated by or sensing temperature (overcurrent protection sensitive to other parameters than temperature H02K 11/0057)}

H02K 11/0052 ・・{actuated by or sensing over-voltage, e.g. over-voltage protection}

H02K 11/0057 ・・{actuated by or sensing overcurrent}

H02K 11/0063 ・・{Manual switches}

H02K 11/0068 ・{Structural association with control circuits, drive circuits}

H02K 11/0073 ・・{Drive circuits, e.g. power electronics (H02K 11/0084 and H02K 11/048 take precedence )}

H02K 11/0078 ・・{with devices for recording or transmitting machine parameters, e.g. memory chips for diagnostic; radio-transmitters}

H02K 11/0084 ・・{associated with gear motors of the worm-and-wheel type}

H02K 11/0089 ・{Structural association with grounding devices}

H02K 11/0094 ・{Structural association with other electrical or electronic devices}

H02K 11/02 ・for suppression of radio interference

H02K 11/022 ・・{Details, e.g. shields}

H02K 11/024 ・・・{Suppressors}

H02K 11/026 ・・・・{associated with brushes, brush holders or their supports}

H02K 11/028 ・・・・{associated with the rotor (H02K 13/105 takes precedence)}

H02K 11/04 ・for rectification

H02K 11/042 ・・{with rotating rectifiers}

H02K 11/044 ・・{in motors (H02K 11/042 takes precedence)}

H02K 11/046 ・・{in generators (H02K 11/042 takes precedence)}

H02K 11/048 ・・・{Rectifiers combined with drive circuits in starter-generators}

H02K 13/00 Structural associations of current collectors with motors or generators, e.g. brush mounting plates, connections to windings (supporting or protecting brushes or brush holders in motor casings or enclosures H02K 5/14); Disposition of current collectors in motors or generators; Arrangements for improving commutation

H02K 13/003 ・{Structural associations of slip-rings}

H02K 13/006 ・{Structural associations of commutators}

H02K 13/02 ・Connections of slip-rings with the winding

H02K 13/04 ・Connections of commutator segments with the winding

H02K 13/06 ・・Resistive connections between winding and commutator segments, e.g. by high-resistance choke, by transistor

H02K 13/08 ・・Segments formed by extensions of winding

H02K 13/10 ・Special arrangements of brushes or commutators for the purpose of improving commutation

H02K 13/105 ・・{Spark suppressors associated with the commutator}

H02K 13/12 ・Means for producing an axial reciprocation of the rotor and its associated current collector part, e.g. for polishing commutator surface

H02K 13/14 ・Circuit arrangements for improvement of commutation, e.g. by use of unidirectionally conductive element

H02K 15/00 Methods or apparatus specially adapted for manufacturing, assembling, maintaining or repairing dynamo-electric machines (manufacture of current collectors in general H01R 43/00)

H02K 15/0006 ・{Disassembling, repairing or modifying dynamo-electric machines (repairing of cooling fluid boxes H02K 15/0093)}

H02K 15/0012 ・{Manufacturing cage rotors}

H02K 15/0018 ・{Applying slot closure means in the core; Manufacture of slot closure means}

H02K 15/0025 ・{Shaping or compacting conductors or winding heads after the installation of the winding in the core or machine (methods or apparatus for simultaneously twisting a plurality of hairpins prior to mounting H02K 15/0428); Applying fastening means on winding heads}

H02K 15/0031 ・・{Shaping or compacting conductors in slots or around salient poles (H02K 15/005 takes precedence)}

H02K 15/0037 ・・{Shaping or compacting winding heads (H02K 15/005, H02K 15/0087 and H02K 15/0428 take precedence)}

H02K 15/0043 ・・・{Applying fastening means on winding headS (fastening by applying resin, glue, varnish and similar means H02K 15/12)}

H02K 15/005 ・・{by means of electrodynamic forces}

H02K 15/0056 ・{Manufacturing winding connections (manufacturing connectors in general H01R 43/00)}

H02K 15/0062 ・・{Manufacturing the terminal arrangement per se; Connecting the terminals to an external circuit}

H02K 15/0068 ・・{Connecting winding sections; Forming leads; Connecting leads to terminals}

H02K 15/0075 ・・・{for random-wound windings}

H02K 15/0081 ・・・{for form-wound windings}

H02K 15/0087 ・・・・{characterised by the method or apparatus for simultaneously twisting a plurality of hairpins open ends after insertion into the machine (for simultaneously twisting a plurality of hairpins prior to mounting into the machine H02K 15/0428)}

H02K 15/0093 ・・・・{Manufacturing or repairing cooling fluid boxes, i.e. terminals of fluid cooled windings ensuring both electrical and fluid connection} [

H02K 15/02 ・of stator or rotor bodies

H02K 15/022 ・・{with salient poles or claw-shaped poles}

H02K 15/024 ・・{with slots}

H02K 15/026 ・・・{Wound cores}

H02K 15/028 ・・・{for fastening to casing or support, respectively to shaft or hub}

H02K 15/03 ・・having permanent magnets

H02K 15/04 ・of windings, prior to mounting into the machine (insulating windings H02K 15/10, H02K 15/12; coil manufacture in general H01F 41/02)

H02K 15/0407 ・・{Windings manufactured by etching, printing or stamping the complete coil}

H02K 15/0414 ・・{Windings consisting of separate elements, e.g. bars, hairpins, segments, half coils}

H02K 15/0421 ・・・{consisting of single conductors, e.g. hairpins}

H02K 15/0428 ・・・・{characterised by the method or apparatus for simultaneously twisting a plurality of hairpins (for simultaneously twisting a plurality of hairpins open ends after insertion into the machine H02K 15/0087)}

H02K 15/0435 ・・{Wound windings}

H02K 15/0442 ・・・{Loop windings (manufacturing of windings consisting of overlapped loops H02K 15/0464)}

H02K 15/045 ・・・・{Form wound coils}

H02K 15/0457 ・・・・{Random wound coils}

H02K 15/0464 ・・・{Lap windings (when on diagonally wound hollow coils H02K 15/0492)}

H02K 15/0471 ・・・・{manufactured by flattening a spiral winding}

H02K 15/0478 ・・・{Wave windings, undulated windings (when on diagonally wound hollow coils H02K 15/0492)}

H02K 15/0485 ・・・・{manufactured by shaping an annular winding}

H02K 15/0492 ・・・{Diagonally wound hollow coils}

H02K 15/06 ・Embedding prefabricated windings in the machine

H02K 15/061 ・・{Air-gap windings}

H02K 15/062 ・・{Windings in slots; salient pole windings}

H02K 15/063 ・・・{Windings for large electric machines, e.g. bar windings (windings consisting of cables H02K 15/065)}

H02K 15/064 ・・・{Windings consisting of separate segments, e.g. hairpin windings (H02K 15/063 takes precedence)}

H02K 15/065 ・・・{Windings consisting of complete sections, e.g. coils, waves (windings for large electric machines other than those consisting of cables H02K 15/063)}

H02K 15/066 ・・・・{inserted perpendicularly to the axis of the slots or inter-polar channels}

H02K 15/067 ・・・・{inserted in parallel to the axis of the slots or inter-polar channels}

H02K 15/068 ・・・・・{Strippers}

H02K 15/08 ・Forming windings by laying conductors into or around core part

H02K 15/085 ・・by laying conductors into slotted stators

H02K 15/09 ・・by laying conductors into slotted rotors

H02K 15/095 ・・by laying conductors around salient poles

H02K 15/10 ・Applying solid insulation to the windings, the stator, or the rotor

H02K 15/105 ・・{to the windings}

H02K 15/12 ・Impregnating, heating or drying of windings, stators, rotors, or machines

H02K 15/125 ・・{Heating or drying of machines in operational state, e.g. standstill heating}

H02K 15/14 ・Casings; Enclosures; Supports

H02K 15/16 ・Centering the rotor within the stator; Balancing the rotor (balancing in general G01M)

H02K 15/165 ・・{Balancing the rotor}

H02K 16/00 Machines with more than one rotor or stator {(machines for transmitting mechanical power from a driving shaft to a driven shaft and comprising structurally interrelated motor and generator parts H02K 51/00; permanent magnet machines with multiple rotors or stators relatively rotated for vectorially combining the excitation fields or the armature voltages H02K 21/029)}

H02K 16/005 ・{Machines with only rotors, e.g. counter-rotating rotors (DC commutator machines or universal AC/DC commutator motors having a rotating armature and a rotating excitation field H02K 23/60)}

H02K 16/02 ・Machines with one stator and two {or more} rotors

H02K 16/025 ・・{with rotors and moving stators connected in a cascade (cascade arrangement of an asynchronous motor with another dynamo-electric motor or converter H02K 17/34)}

H02K 16/04 ・Machines with one rotor and stators

H02K 17/00 Asynchronous induction motors; Asynchronous induction generators

H02K 17/02 ・Asynchronous induction motors

H02K 17/04 ・・for single phase current

H02K 17/06 ・・・having windings arranged for permitting pole-changing

H02K 17/08 ・・・Motors with auxiliary phase obtained by externally fed auxiliary winding, e.g. capacitor motor

H02K 17/10 ・・・Motors with auxiliary phase obtained by split-pole carrying short-circuited winding

H02K 17/12 ・・for multi-phase current

H02K 17/14 ・・・having windings arranged for permitting pole-changing

H02K 17/16 ・・having rotor with internally short-circuited windings, e.g. cage rotor

H02K 17/165 ・・・{characterised by the squirrel-cage or other short-circuited windings}

H02K 17/18 ・・・having double or multiple-cage rotor

H02K 17/185 ・・・・{characterised by the double- or multiple cage windings}

H02K 17/20 ・・・having deep-bar rotor

H02K 17/205 ・・・・{characterised by the deep-bar windings}

H02K 17/22 ・・having rotor with windings connected to slip-rings

H02K 17/24 ・・・in which both stator and rotor are fed with ac

H02K 17/26 ・・having rotor or stator designed to permit synchronous operation

H02K 17/28 ・・having compensating winding for improving phase angle

H02K 17/30 ・・Structural association with auxiliary electric devices influencing the characteristic of, or controlling, the motor, e.g. with impedance, with switch (control arrangements external to the motor H02P)

H02K 17/32 ・・Structural association with auxiliary mechanical devices, e.g. clutch, brake (control arrangements external to the motor H02P)

H02K 17/34 ・・Cascade arrangement of an asynchronous motor with another dynamo-electric motor or converter ({machines with rotors and moving stators connected in a cascade H02K 16/025;} control of cascade-arrangements H02P)

H02K 17/36 ・・・with another asynchronous induction motor

H02K 17/38 ・・・with a commutator machine

H02K 17/40 ・・・with a rotary ac/dc converter (cascade ac/dc converters H02K 47/06)

H02K 17/42 ・Asynchronous induction generators (H02K 17/02 takes precedence)

H02K 17/44 ・・Structural association with exciting machine

H02K 19/00 Synchronous motors or generators (having permanent magnet H02K 21/00)

H02K 19/02 ・Synchronous motors

H02K 19/04 ・・for single-phase current

H02K 19/06 ・・・Motors having windings on the stator and a variable-reluctance soft-iron rotor without windings, e.g. inductor motor

H02K 19/08 ・・・Motors having windings on the stator and a smooth rotor of material with large hysteresis without windings, e.g. hysteresis motor

H02K 19/10 ・・for multi-phase current

H02K 19/103 ・・・{Motors having windings on the stator and a variable reluctance soft-iron rotor without windings}

H02K 19/106 ・・・{Motors having windings in the stator and a smooth rotor of material with large hysteresis without windings}

H02K 19/12 ・・・characterised by the arrangement of exciting windings, e.g. for self-excitation, for compounding, for pole-changing

H02K 19/14 ・・having additional short-circuited winding for starting as an asynchronous motor

H02K 19/16 ・Synchronous generators

H02K 19/18 ・・having windings each turn of which co-operates only with poles of one polarity, e.g. homopolar generator

H02K 19/20 ・・・with variable-reluctance soft-iron rotor without winding

H02K 19/22 ・・having windings each turn of which co-operates alternately with poles of opposite polarity, e.g. heteropolar generator

H02K 19/24 ・・・with variable-reluctance soft-iron rotor without winding

H02K 19/26 ・・characterised by the arrangement of exciting winding

H02K 19/28 ・・・for self-excitation

H02K 19/30 ・・・for compounding

H02K 19/32 ・・・for pole-changing

H02K 19/34 ・・Generators with two or more outputs

H02K 19/36 ・・Structural association with auxiliary electric devices influencing the characteristic of, or controlling, the generator, e.g. with impedance, with switch (control arrangements external to the generator H02P)

H02K 19/365 ・・・{with a voltage regulator}

H02K 19/38 ・・Structural association with exciting machine

H02K 21/00 Synchronous motors having permanent magnet; Synchronous generators having permanent magnet (stator cores with permanent magnets H02K 1/17; rotor cores with permanent magnets H02K 1/27)

H02K 21/02 ・Details

H02K 21/021 ・・{Means for mechanical adjustment of the excitation flux}

H02K 21/022 ・・・{by modifying the relative position between field and armature, e.g. between rotor and stator (vectorial combination of field or armature sections H02K 21/029)}

H02K 21/023 ・・・・{by varying the amount of superposition, i.e. the overlap, of field and armature}

H02K 21/024 ・・・・・{Radial air gap machines}

H02K 21/025 ・・・・{by varying the thickness of the air gap between field and armature}

H02K 21/026 ・・・・・{Axial air gap machines}

H02K 21/027 ・・・・・{Conical air gap machines}

H02K 21/028 ・・・{by modifying the magnetic circuit within the field or the armature, e.g. by using shunts, by adjusting the magnets position, by vectorial combination of field or armature sections}

H02K 21/029 ・・・・{Vectorial combination of the fluxes generated by a plurality of field sections or of the voltages induced in a plurality of armature sections}

H02K 21/04 ・・Windings on magnet for additional excitation {; windings and magnets for additional excitation}

H02K 21/042 ・・・{with permanent magnets and field winding both rotating}

H02K 21/044 ・・・・{Rotor of the claw pole type}

H02K 21/046 ・・・{with rotating permanent magnets and stationary field winding}

H02K 21/048 ・・・・{Rotor of the claw pole type}

H02K 21/10 ・・Rotating armatures

H02K 21/12 ・with stationary armature and rotating magnet

H02K 21/125 ・・{having an annular armature coil (H02K 21/14 to H02K 21/24 take precedence)}

H02K 21/14 ・・magnet rotating within armature

H02K 21/145 ・・・{having an annular armature coil (with homopolar co-operation H02K 21/20)}

H02K 21/16 ・・・having an annular armature core with salient poles (with homopolar co-operation H02K 21/20)

H02K 21/18 ・・・having horse-shoe armature core (with homopolar co-operation H02K 21/20)

H02K 21/185 ・・・・{with the axis of the rotor perpendicular to the plane of the armature}

H02K 21/20 ・・・having windings each turn of which co-operates only with poles of one polarity, e.g. homopolar machine

H02K 21/22 ・・magnet rotating around armature, e.g. flywheel magneto

H02K 21/222 ・・・{Flywheel magnetos}

H02K 21/225 ・・・・{having I-shaped, E-shaped or similarly shaped armature cores}

H02K 21/227 ・・・{having an annular armature coil}

H02K 21/24 ・・magnet axially facing armature, e.g. hub-type cycle dynamo

H02K 21/26 ・with rotating armature and stationary magnet

H02K 21/28 ・・armature rotating within magnet

H02K 21/30 ・・・having an annular armature core with salient poles (with homopolar co-operation H02K 21/36)

H02K 21/32 ・・・having a horse-shoe magnet (with homopolar co-operation H02K 21/36)

H02K 21/325 ・・・・{with the axis of the rotating armature perpendicular to the plane of the magnet}

H02K 21/34 ・・・having bell-shaped or bar-shaped magnet, e.g. for cycle lighting (with homopolar co-operation H02K 21/36)

H02K 21/36 ・・・with homopolar co-operation

H02K 21/38 ・with rotating flux distributor, and armature and magnet both stationary

H02K 21/40 ・・flux distributor rotating around magnet and within armature

H02K 21/42 ・・flux distributor rotating around armature and within magnet

H02K 21/44 ・・armature windings wound upon magnet

H02K 21/46 ・Motors having additional short-circuited winding for starting as an asynchronous motor

H02K 21/48 ・Generators with two or more outputs

H02K 23/00 Dc commutator motors or generators having mechanical commutator; Universal ac/dc commutator motors

H02K 23/02 ・characterised by the exciting arrangement

H02K 23/023 ・・{having short-circuited brushes}

H02K 23/026 ・・{having an unregular distribution of the exciting winding or of the excitation over the poles}

H02K 23/04 ・・having permanent magnet excitation

H02K 23/06 ・・having shunt connection of excitation windings

H02K 23/08 ・・having series connection of excitation windings

H02K 23/10 ・・having compound connection of excitation windings

H02K 23/12 ・・having excitation produced by a current source independent of the armature circuit

H02K 23/14 ・・having high-speed excitation or de-excitation, e.g. by neutralising the remanent excitation field

H02K 23/16 ・・having angularly adjustable excitation field, e.g. by pole reversing, by pole switching

H02K 23/18 ・・having displaceable main or auxiliary brushes

H02K 23/20 ・・having additional brushes spaced intermediately of the main brushes on the commutator, e.g. cross-field machine, metadyne, amplidyne, other armature-reaction excited machine

H02K 23/22 ・・having compensating or damping winding

H02K 23/24 ・・having commutating-pole winding

H02K 23/26 ・characterised by the armature winding

H02K 23/28 ・・having open winding, i.e. not closed within armature

H02K 23/30 ・・having lap winding; having loop winding

H02K 23/32 ・・having wave winding; having undulating winding

H02K 23/34 ・・having mixed windings

H02K 23/36 ・・having more than one winding; having more than one commutator; having more than one stator

H02K 23/38 ・・having winding or connection for improving commutation, e.g. equipotential connection

H02K 23/40 ・characterised by the arrangement of the magnet circuit

H02K 23/405 ・・{Machines with a special form of the pole shoes}

H02K 23/42 ・・having split poles, i.e. zones for varying reluctance by gaps in poles or by poles with different spacing of the air gap

H02K 23/44 ・・having movable or turnable iron parts

H02K 23/46 ・・having stationary shunts, i.e. magnetic cross flux

H02K 23/48 ・・having adjustable armature

H02K 23/50 ・Generators with two or more outputs

H02K 23/52 ・Motors acting also as generators, e.g. starting motor used as generator for ignition or lighting

H02K 23/54 ・Disc armature motors or generators

H02K 23/56 ・Motors or generators having the iron core separated from armature winding

H02K 23/58 ・Motors or generators having no iron core

H02K 23/60 ・Motors or generators having a rotating armature and a rotating excitation field {(machines with only rotors in general H02K 16/005)}

H02K 23/62 ・Motors or generators with stationary armature and rotating excitation field

H02K 23/64 ・Motors specially adapted for running on dc or ac by choice

H02K 23/66 ・Structural association with auxiliary electric devices influencing the characteristic of, or controlling, the machine, e.g. with impedance, with switch (control arrangements external to the machine H02P)

H02K 23/68 ・Structural association with auxiliary mechanical devices, e.g. with clutch, with brake (control arrangements external to the machine H02P)

H02K 24/00 Machines adapted for the instantaneous transmission or reception of the angular displacement of rotating parts, e.g. synchro, selsyn

H02K 25/00 Dc interrupter motors or generators

H02K 26/00 Machines adapted to function as torque motors, i.e. to exert a torque when stalled

H02K 27/00 Ac commutator motors or generators having mechanical commutator (universal ac/dc motors {H02K 23/00}, H02K 23/64)

H02K 27/02 ・characterised by the armature winding

H02K 27/04 ・having single-phase operation in series or shunt connection

H02K 27/06 ・・with a single or multiple short-circuited commutator, e.g. repulsion motor

H02K 27/08 ・・with multiple-fed armature

H02K 27/10 ・・with switching devices for different modes of operation, e.g. repulsion-induction motor

H02K 27/12 ・having multi-phase operation

H02K 27/14 ・・in series connection

H02K 27/16 ・・in shunt connection with stator feeding

H02K 27/18 ・・in shunt connection with rotor feeding

H02K 27/20 ・Structural association with a speed regulating device

H02K 27/22 ・having means for improving commutation, e.g. auxiliary fields, double windings, double brushes

H02K 27/24 ・having two or more commutators

H02K 27/26 ・having disc armature

H02K 27/28 ・Structural association with auxiliary electric devices influencing the characteristic of, or controlling, the machine (control arrangements external to the machine H02P)

H02K 27/30 ・Structural association with auxiliary mechanical devices, e.g. clutch, brake (control arrangements external to the machine H02P)

H02K 29/00 Motors or generators having non-mechanical commutating devices, e.g. discharge tubes, semiconductor devices

H02K 29/03 ・with a magnetic circuit specially adapted for avoiding torque ripples or self-starting problems

H02K 29/06 ・with position sensing devices

H02K 29/08 ・・using magnetic effect devices, e.g. Hall-plates, magneto-resistors (H02K 29/12 takes precedence)

H02K 29/10 ・・using light effect devices

H02K 29/12 ・・using detecting coils {using the machine windings as detecting coil}

H02K 29/14 ・with speed sensing devices ({structural association with other mechanical energy devices H02K 7/00})

H02K 31/00 Acyclic motors or generators, i.e. dc machines having a drum or disc armature with continuous current collectors

H02K 31/02 ・with solid-contact collectors

H02K 31/04 ・with at least one liquid-contact collector

H02K 33/00 Motors with reciprocating, oscillating, or vibrating magnet, armature, or coil system (arrangements for handling mechanical energy structurally associated with motors H02K 7/00, e.g. H02K 7/06)

H02K 33/02 ・with armature moved one way by energisation of a single coil system and returned by mechanical force, e.g. by spring

H02K 33/04 ・・wherein the frequency of operation is determined by the frequency of uninterrupted ac energisation

H02K 33/06 ・・・with polarised armature

H02K 33/08 ・・・with dc energisation superimposed on ac energisation

H02K 33/10 ・・wherein the alternate energisation and de-energisation of the single coil system is effected or controlled by movement of the armature

H02K 33/12 ・with armature moving in alternate directions by alternate energisation of two coil systems

H02K 33/14 ・・wherein the alternate energisation and de-energisation of the two coil systems are effected or controlled by movement of the armature

H02K 33/16 ・with polarised armature moving in alternate directions by reversal or energisation of a single coil system

H02K 33/18 ・with coil system moving upon intermittent or reversed energisation thereof by interaction with a fixed field system, e.g. permanent magnet

H02K 35/00 Generators with reciprocating, oscillating, or vibrating coil system, magnet, armature, or other part of the magnetic circuit (arrangements for handling mechanical energy structurally associated with generators H02K 7/00, e.g. H02K 7/06)

H02K 35/02 ・with moving magnet and stationary coil system

H02K 35/04 ・with moving coil system and stationary magnet

H02K 35/06 ・with moving flux distributor, and both coil system and magnet stationary

H02K 37/00 Motors with rotor rotating step by step and without interrupter or commutator driven by the rotor, e.g. stepping motors

H02K 37/02 ・variable reluctance type

H02K 37/04 ・・Rotor situated within stator

H02K 37/06 ・・Rotor situated around stator

H02K 37/08 ・・Rotor axially facing stator

H02K 37/10 ・permanent magnet type

H02K 37/12 ・・with stationary armature and rotating magnet

H02K 37/125 ・・・{Magnet axially facing armature}

H02K 37/14 ・・・Magnet rotating within armature

H02K 37/16 ・・・・having horse-shoe armature core

H02K 37/18 ・・・・homopolar type

H02K 37/20 ・・with rotating flux distributor, the armature and magnet both being stationary

H02K 37/22 ・Damping units

H02K 37/24 ・Structural association with auxiliary mechanical devices

H02K 39/00 Generators specially adapted for producing a desired non-sinusoidal waveform

H02K 41/00 Propulsion systems in which a rigid body is moved along a path due to dynamo-electric interaction between the body and a magnetic field travelling along the path {(electromagnetic launchers F41B 6/00)}

H02K 41/02 ・Linear motors; Sectional motors

H02K 41/025 ・・Asynchronous motors

H02K 41/03 ・・Synchronous motors; Motors moving step by step; Reluctance motors (H02K 41/035 takes precedence)

H02K 41/031 ・・・{of the permanent magnet type}

H02K 41/033 ・・・・{with armature and magnets on one member, the other member being a flux distributor}

H02K 41/035 ・・Dc motors; Unipolar motors

H02K 41/0352 ・・・{Unipolar motors}

H02K 41/0354 ・・・・{Lorentz force motors, e.g. voice coil motors}

H02K 41/0356 ・・・・・{moving along a straight path}

H02K 41/0358 ・・・・・{moving along a curvilinear path}

H02K 41/06 ・Rolling motors, i.e. having the rotor axis parallel to the stator axis and following a circular path as the rotor rolls around the inside or outside of the stator; {Nutating motors, i.e. having the rotor axis inclined with respect to the stator axis and performing a nutational movement as the rotor rolls on the stator}

H02K 41/065 ・・{Nutating motors}

H02K 44/00 Machines in which the dynamo-electric interaction between a plasma or flow of conductive liquid or of fluid-borne conductive or magnetic particles and a coil system or magnetic field converts energy of mass flow into electrical energy or vice versa

H02K 44/02 ・Electrodynamic pumps

H02K 44/04 ・・Conduction pumps

H02K 44/06 ・・Induction pumps

H02K 44/08 ・Magnetohydrodynamic (MHD) generators

H02K 44/085 ・・{with conducting liquids}

H02K 44/10 ・・Constructional details of electrodes

H02K 44/12 ・・Constructional details of fluid channel

H02K 44/14 ・・・Circular or screw-shaped channel

H02K 44/16 ・・Constructional details of the magnetic circuit

H02K 44/18 ・・for generating ac power

H02K 44/20 ・・・by changing the polarity of the magnetic field

H02K 44/22 ・・・by changing the conductivity of the fluid

H02K 44/24 ・・・by reversing the direction of fluid

H02K 44/26 ・・・by creating a travelling magnetic field

H02K 44/28 ・Association of MHD generators with conventional generators (nuclear power plants including a MHD generator G21D 7/02)

H02K 47/00 Dynamo-electric converters

H02K 47/02 ・Ac/dc converters of vica versa

H02K 47/04 ・・Motor/generators

H02K 47/06 ・・Cascade converters

H02K 47/08 ・・Single-armature converters

H02K 47/10 ・・・with booster machine on the ac side

H02K 47/12 ・Dc/dc converters

H02K 47/14 ・・Motor/generators

H02K 47/16 ・・Single-armature converters, e.g. metadyne

H02K 47/18 ・Ac/ac converters

H02K 47/20 ・・Motor/generators

H02K 47/22 ・・Single-armature frequency converters with or without phase-number conversion

H02K 47/24 ・・・having windings for different numbers of poles

H02K 47/26 ・・・operating as under- or over-synchronously running asynchronous induction machines, e.g. cascade arrangement of asynchronous and synchronous machines

H02K 47/28 ・・・operating as commutator machines with added slip-rings

H02K 47/30 ・・Single-armature phase-number converters without frequency conversion

H02K 49/00 Dynamo-electric clutches; Dynamo-electric brakes (electrically or magnetically actuated clutches or brakes F16D 27/00, F16D 29/00, F16D 65/28; magnetic-particle clutches F16D 37/02; adapted for use as dynamometers G01L)

H02K 49/02 ・of the asynchronous induction type

H02K 49/04 ・・of the eddy-current hysteresis type {(eddy current brakes cooperating with a rail B61H 7/083)}

H02K 49/043 ・・・{with a radial airgap}

H02K 49/046 ・・・{with an axial airgap}

H02K 49/06 ・of the synchronous type {(H02K 49/10 takes precedence)}

H02K 49/065 ・・{hysteresis type}

H02K 49/08 ・of the collector armature type

H02K 49/10 ・of the permanent-magnet type

H02K 49/102 ・・{Magnetic gearings, i.e. assembly of gears, linear or rotary, by which motion is magnetically transferred without physical contact (magnetized gearings with physical contact F16H 13/12, F16H 49/005)}

H02K 49/104 ・・{Magnetic couplings consisting of only two coaxial rotary elements, i.e. the driving element and the driven element}

H02K 49/106 ・・・{with a radial air gap}

H02K 49/108 ・・・{with an axial air gap}

H02K 49/12 ・of the acyclic type

H02K 51/00 Dynamo-electric gears, i.e. dynamo-electric means for transmitting mechanical power from a driving shaft to a driven shaft and comprising structurally interrelated motor and generator parts

H02K 53/00 Alleged dynamo-electric perpetua mobilia

H02K 55/00 Dynamo-electric machines having windings operating at cryogenic temperatures

H02K 55/02 ・of the synchronous type

H02K 55/04 ・・with rotating field windings

H02K 55/06 ・of the homopolar type

H02K 57/00 Dynamo-electric machines not provided for in groups H02K 17/00 to H02K 55/00

H02K 57/003 ・{generators}

H02K 57/006 ・{motors}

H02K 2005/00 Casings; Enclosures; Supports (casings for electric apparatus in general H05K 5/00)

H02K 2005/04 ・Casings or enclosures characterised by the shape, form or construction thereof

H02K 2005/12 ・・specially adapted for operating in liquid or gas (combined with cooling arrangements H02K 9/00)

H02K 2005/128 ・・・using air-gap sleeve or air-gap disc

H02K 2005/1287 ・・・・Details of sleeves or discs

H02K 2201/00 Specific aspects not provided for in the other groups of this subclass relating to the magnetic circuits

H02K 2201/03 ・Machines characterised by aspects of the air-gap between rotor and stator

H02K 2201/06 ・Magnetic cores, or permanent magnets characterised by their skew

H02K 2201/09 ・Magnetic cores comprising laminations characterised by being fastened by caulking

H02K 2201/12 ・Transversal flux machines

H02K 2201/15 ・Sectional machines

H02K 2201/18 ・Machines moving with multiple degrees of freedom

H02K 2203/00 Specific aspects not provided for in the other groups of this subclass relating to the windings

H02K 2203/03 ・Machines characterised by the wiring boards, i.e. printed circuit boards or similar structures for connecting the winding terminations

H02K 2203/06 ・Machines characterised by the wiring leads, i.e. conducting wires for connecting the winding terminations

H02K 2203/09 ・Machines characterised by wiring elements other than wires, e.g. bus rings, for connecting the winding terminations

H02K 2203/12 ・Machines characterised by the bobbins for supporting the windings

H02K 2203/15 ・Machines characterised by cable windings, e.g high-voltage cables, ribbon cables

H02K 2205/00 Specific aspects not provided for in the other groups of this subclass relating to casings, enclosures, supports

H02K 2205/03 ・Machines characterised by thrust bearings

H02K 2205/06 ・Machines characterised by means for keeping the brushes in a retracted position during assembly

H02K 2205/09 ・Machines characterised by drain passages or by venting, breathing or pressure compensating means

H02K 2205/12 ・Machines characterised by means for reducing windage losses or windage noise

H02K 2207/00 Specific aspects not provided for in the other groups of this subclass relating to arrangements for handling mechanical energy

H02K 2207/03 ・Tubular motors, i.e. rotary motors mounted inside a tube, e.g. for blinds

H02K 2209/00 Specific aspects not provided for in the other groups of this subclass relating to systems for cooling or ventilating

H02K 2211/00 Specific aspects not provided for in the other groups of this subclass relating to measuring or protective devices or electric components

H02K 2211/03 ・Machines characterised by circuit boards, e.g. pcb

H02K 2213/00 Specific aspects, not otherwise provided for and not covered by codes H02K 2201/00 - H02K 2211/00

H02K 2213/03 ・Machines characterised by numerical values, ranges, mathematical expressions or similar information

H02K 2213/06 ・Machines characterised by the presence of fail safe, back up, redundant or other similar emergency arrangements

H02K 2213/09 ・Machines characterised by the presence of elements which are subject to variation, e.g. adjustable bearings, reconfigurable windings, variable pitch ventilators

H02K 2213/12 ・Machines characterised by the modularity of some components