WebCPC CPC COOPERATIVE PATENT CLASSIFICATION
F17C VESSELS FOR CONTAINING OR STORING COMPRESSED, LIQUEFIED OR SOLIDIFIED GASES; FIXED-CAPACITY GAS-HOLDERS; FILLING VESSELS WITH, OR DISCHARGING FROM VESSELS, COMPRESSED, LIQUEFIED, OR SOLIDIFIED GASES (storing fluids in natural or artificial cavities or chambers in the earth B65G 5/00; construction or assembling of bulk storage containers employing civil-engineering techniques E04H 7/00; variable-capacity gas-holders F17B; liquefaction or refrigeration machines, plants, or systems F25)
F17C 1/00 Pressure vessels, e.g. gas cylinder, gas tank, replaceable cartridge (pressurised apparatus for purposes other than storage, see the relevant subclasses such as A62C, B05B; associated with vehicles, see the appropriate subclass of classes B60 to B64; pressure vessels in general F16J 12/00; {autoclaves B01J 3/04; tank vehicles B60P 3/22; railway tank wagons for carrying fluent materials B61D 5/00; accumulators for supplying fluid under pressure F15B 1/04; liquified gas stoves F24C 3/00})
F17C 1/002 ・{Storage in barges or on ships}
F17C 1/005 ・{Storage of gas or gaseous mixture at high pressure and at high density condition, e.g. in the single state phase}
F17C 1/007 ・{Underground or underwater storage}
F17C 1/02 ・involving reinforcing arrangements {F17C 1/14, F17C 1/16 take precedence}
F17C 1/04 ・・Protecting sheathings
F17C 1/06 ・・・Built-up from wound-on bands or filamentary material, e.g. wires
F17C 1/08 ・・Integral reinforcements, e.g. ribs
F17C 1/10 ・with provision for protection against corrosion e.g. due to gaseous acid ({F17C 1/14, F17C 1/16 take precedence}; inhibiting corrosion of metallic material or incrustation in general C23F)
F17C 1/12 ・with provision for thermal insulation ({F17C 1/14, F17C 1/16 take precedence}; thermal insulation in general F16L 59/00)
F17C 1/14 ・constructed of aluminium; constructed of non-magnetic steel
F17C 1/16 ・constructed of plastics materials {(shaping of plastics B29C)}
F17C 3/00 Vessels not under pressure
F17C 3/005 ・{Underground or underwater containers or vessels (storing in natural or artificial cavities in the earth in general B65G 5/00)}
F17C 3/02 ・with provision for thermal insulation (thermal insulation in general refrigerators F25D; insulation specially adapted for cryogenic vessels F17C 13/001; tank vehicles B60P 3/22; railway tank wagons B61D 5/00}
F17C 3/022 ・・{Land-based bulk storage containers (civil engineering aspects E04H 7/00)}
F17C 3/025 ・・{Bulk storage in barges or on ships (constructive aspects B63B 25/16)}
F17C 3/027 ・・・{Wallpanels for so-called membrane tanks}
F17C 3/04 ・・by insulating layers (F17C 3/08 takes precedence)
F17C 3/06 ・・・on the inner surface, i.e. in contact with the stored fluid
F17C 3/08 ・・by vacuum spaces, e.g. Dewar flask (for household use A47J 41/02)
F17C 3/085 ・・・{Cryostats}
F17C 3/10 ・・by liquid-circulating or vapour-circulating jackets
F17C 3/12 ・with provision for protection against corrosion, e.g. due to gaseous acid (protection against corrosion in general C23F)
F17C 5/00 Methods or apparatus for filling containers with liquefied, solidified, or compressed gases under pressures (adding propellants to aerosol containers B65B 31/00)
NOTE - This group includes not only the filling of vessels for storage of compressed or liquefied gases, but also the filling of pressurised apparatus insofar as it is not covered by a single other subclass, e.g. A62C, B05B.F17C 5/002 ・{Automated filling apparatus}
F17C 5/005 ・・{for gas bottles, such as on a continuous belt or on a merry-go-round}
F17C 5/007 ・・{for individual gas tanks or containers, e.g. in vehicles (filling with liquid fuel not under pressure, B60S 5/02, B67D 5/00)}
F17C 5/02 ・for filling with liquefied gases
F17C 5/04 ・・requiring the use of refrigeration, e.g. filling with helium or hydrogen
F17C 5/06 ・for filling with compressed gases
F17C 6/00 Methods and apparatus for filling vessels not under pressure with liquefied or solidified gases
F17C 7/00 Methods or apparatus for discharging liquefied, solidified, or compressed gases from pressure vessels, not covered by another subclass
F17C 7/02 ・Discharging liquefied gases
F17C 7/04 ・・with change of state, e.g. vaporisation
F17C 9/00 Methods or apparatus for discharging liquefied or solidified gases from vessels not under pressure
F17C 9/02 ・with change of state, e.g. vaporisation
F17C 9/04 ・・Recovery of thermal energy
F17C 11/00 Use of gas-solvents or gas-sorbents in vessels {(absorbing compositions for acetylene C10L 3/04; absorbing compositions for hydrogen C01B 3/0005)}
F17C 11/002 ・{for acetylene}
F17C 11/005 ・{for hydrogen}
F17C 11/007 ・{for hydrocarbon gases, such as methane or natural gas, propane, butane or mixtures thereof (LPG)}
F17C 13/00 Details of vessels or of the filling or discharging of vessels
F17C 13/001 ・{Thermal insulation specially adapted for cryogenic vessels (vessels not under pressure with insulation F17C 3/02; thermal insulation in general F16L 59/00)}
F17C 13/002 ・{for vessels under pressure (F17C 13/008 and F17C 13/02 to F17C 13/12 take precedence)}
F17C 13/003 ・・{Means for coding or identifying them and/or their contents}
F17C 13/004 ・{for large storage vessels not under pressure (F17C 13/008 and F17C 13/02 to F17C 13/12 take precedence)}
F17C 13/005 ・{for medium-size and small storage vessels not under pressure (F17C 13/008 and F17C 13/02 to F17C 13/12 take precedence)}
F17C 13/006 ・・{for Dewar vessels or cryostats}
F17C 13/007 ・・・{used for superconducting phenomena (investigating by nuclear magnetic resonance G01N 24/08; magnets having superconductive winding H01F 6/00)}
F17C 13/008 ・{for use under microgravity conditions}
F17C 13/02 ・Special adaptations of indicating, measuring, or monitoring equipment (measuring in general G01)
F17C 13/021 ・・{having the height as the parameter}
F17C 13/023 ・・{having the mass as the parameter}
F17C 13/025 ・・{having the pressure as the parameter}
F17C 13/026 ・・{having the temperature as the parameter}
F17C 13/028 ・・{having the volume as the parameter}
F17C 13/04 ・Arrangement or mounting of valves (valves per se F16K; {snap-coupling of nipples F16L 37/00})
F17C 13/045 ・・{Automatic change-over switching assembly for bottled gas systems with two (or more) gas containers}
F17C 13/06 ・Closures, e.g. cap, breakable member ({for autoclaves B01J 3/03}; closures for {large} containers in general B65D{B65D 90/54}; {for pressure vessels in general F16J 13/00})
F17C 13/08 ・Mounting arrangements for vessels
F17C 13/081 ・・{for large land-based storage vessels (supports for large containers in general B65D 90/12)}
F17C 13/082 ・・{for large sea-borne storage vessels (load-accomodating arrangements for ships or waterborne vessels B63B 25/12)}
F17C 13/083 ・・{for medium-sized mobile storage vessels, e.g. tank vehicles or railway tank vehicles}
F17C 13/084 ・・{for small-sized storage vessels, e.g. compressed gas cylinders or bottles, disposable gas vessels, vessels adapted for automotive use}
F17C 13/085 ・・・{on wheels (hand carts B62B)}
F17C 13/086 ・・{for Dewar vessels or cryostats}
F17C 13/087 ・・・{used for superconducting phenomena}
F17C 13/088 ・・{for use under microgravity conditions}
F17C 13/10 ・Arrangements for preventing freezing
F17C 13/12 ・Arrangements or mounting of devices for preventing or minimising the effect of explosion (flame traps A62C 4/00); {Other safety measures}
F17C 13/123 ・・{for gas bottles, cylinders or reservoirs for tank vehicles or for railway tank wagons}
F17C 13/126 ・・{for large storage containers for liquefied gas (for large containers in general B65D 90/22)}
F17C 2201/00 Vessel construction, in particular geometry, arrangement or size
F17C 2201/01 ・Shape
F17C 2201/0104 ・・cylindrical
F17C 2201/0109 ・・・with exteriorly curved end-piece
F17C 2201/0114 ・・・with interiorly curved end-piece
F17C 2201/0119 ・・・with flat end-piece
F17C 2201/0123 ・・・with variable thickness or diameter
F17C 2201/0128 ・・spherical or elliptical
F17C 2201/0133 ・・toroidal
F17C 2201/0138 ・・tubular
F17C 2201/0142 ・・conical
F17C 2201/0147 ・・complex
F17C 2201/0152 ・・・Lobes
F17C 2201/0157 ・・・Polygonal
F17C 2201/0161 ・・・Honeycomb
F17C 2201/0166 ・・・divided in several chambers
F17C 2201/0171 ・・・comprising a communication hole between chambers
F17C 2201/0176 ・・variable
F17C 2201/018 ・・・with bladders
F17C 2201/0185 ・・・with separating membrane
F17C 2201/019 ・・・with pistons
F17C 2201/0195 ・・・with bellows
F17C 2201/03 ・Orientation
F17C 2201/032 ・・with substantially vertical main axis
F17C 2201/035 ・・with substantially horizontal main axis
F17C 2201/037 ・・with sloping main axis
F17C 2201/05 ・Size
F17C 2201/052 ・・large (>1000 m3)
F17C 2201/054 ・・medium (>1 m3)
F17C 2201/056 ・・Small (<1 m3)
F17C 2201/058 ・・portable (<30 l)
F17C 2201/06 ・Vessel construction using filling material in contact with the handled fluid
F17C 2203/00 Vessel construction, in particular walls or details thereof
F17C 2203/01 ・Reinforcing or suspension means
F17C 2203/011 ・・Reinforcing means
F17C 2203/012 ・・・on or in the wall, e.g. ribs
F17C 2203/013 ・・・in the vessel, e.g. columns
F17C 2203/014 ・・Suspension means
F17C 2203/015 ・・・Bars
F17C 2203/016 ・・・Cords
F17C 2203/017 ・・・Magnetic means
F17C 2203/018 ・・・by attachment at the neck
F17C 2203/03 ・Thermal insulations
F17C 2203/0304 ・・by solid means
F17C 2203/0308 ・・・Radiation shield
F17C 2203/0312 ・・・・cooled by external means
F17C 2203/0316 ・・・・cooled by vaporised gas from the interior
F17C 2203/032 ・・・・Multi-sheet layers
F17C 2203/0325 ・・・Aerogel
F17C 2203/0329 ・・・Foam
F17C 2203/0333 ・・・・Polyurethane
F17C 2203/0337 ・・・Granular
F17C 2203/0341 ・・・・Perlite
F17C 2203/0345 ・・・Fibres
F17C 2203/035 ・・・・Glass wool
F17C 2203/0354 ・・・Wood
F17C 2203/0358 ・・・in form of panels
F17C 2203/0362 ・・by liquid means
F17C 2203/0366 ・・・Cryogen
F17C 2203/037 ・・・Water
F17C 2203/0375 ・・by gas
F17C 2203/0379 ・・・Inert
F17C 2203/0383 ・・・Air
F17C 2203/0387 ・・・Cryogen
F17C 2203/0391 ・・by vacuum
F17C 2203/0395 ・・・Getter
F17C 2203/06 ・Materials for walls or layers thereof; Properties or structures of walls or their materials
F17C 2203/0602 ・・Wall structures; Special features thereof
F17C 2203/0604 ・・・Liners
F17C 2203/0607 ・・・Coatings
F17C 2203/0609 ・・・Straps, bands or ribbons
F17C 2203/0612 ・・・Wall structures
F17C 2203/0614 ・・・・Single wall
F17C 2203/0617 ・・・・・with one layer
F17C 2203/0619 ・・・・・with two layers
F17C 2203/0621 ・・・・・with three layers
F17C 2203/0624 ・・・・・with four or more layers
F17C 2203/0626 ・・・・Multiple walls
F17C 2203/0629 ・・・・・Two walls
F17C 2203/0631 ・・・・・Three or more walls
F17C 2203/0634 ・・Materials for walls or layers thereof
F17C 2203/0636 ・・・Metals
F17C 2203/0639 ・・・・Steels
F17C 2203/0641 ・・・・・Non-magnetic steels
F17C 2203/0643 ・・・・・Stainless steels
F17C 2203/0646 ・・・・Aluminium
F17C 2203/0648 ・・・・Alloys or compositions of metals
F17C 2203/0651 ・・・・・Invar
F17C 2203/0653 ・・・・Lead
F17C 2203/0656 ・・・・in form of filaments
F17C 2203/0658 ・・・Synthetics
F17C 2203/066 ・・・・Plastics
F17C 2203/0663 ・・・・in form of fibers or filaments
F17C 2203/0665 ・・・・・radially wound
F17C 2203/0668 ・・・・・axially wound
F17C 2203/067 ・・・・・helically wound
F17C 2203/0673 ・・・・・Polymers
F17C 2203/0675 ・・・・with details of composition
F17C 2203/0678 ・・・Concrete
F17C 2203/068 ・・Special properties of materials for vessel walls
F17C 2203/0682 ・・・with liquid or gas layer
F17C 2203/0685 ・・・flexible
F17C 2203/0687 ・・・superconducting
F17C 2203/069 ・・・Break point in the wall
F17C 2203/0692 ・・・transparent
F17C 2203/0695 ・・・pre-constrained
F17C 2203/0697 ・・・comprising nanoparticles
F17C 2205/00 Vessel construction, in particular mounting arrangements, attachments or identifications means
F17C 2205/01 ・Mounting arrangements
F17C 2205/0103 ・・Exterior arrangements
F17C 2205/0107 ・・・Frames
F17C 2205/0111 ・・・Boxes
F17C 2205/0115 ・・・Dismountable protective hulls
F17C 2205/0119 ・・・Vessel walls form part of another structure
F17C 2205/0123 ・・characterised by number of vessels
F17C 2205/0126 ・・・One vessel
F17C 2205/013 ・・・Two or more vessels
F17C 2205/0134 ・・・・characterised by the presence of fluid connection between vessels
F17C 2205/0138 ・・・・・bundled in series
F17C 2205/0142 ・・・・・bundled in parallel
F17C 2205/0146 ・・・・・with details of the manifold
F17C 2205/0149 ・・・・Vessel mounted inside another one
F17C 2205/0153 ・・Details of mounting arrangements
F17C 2205/0157 ・・・for transport
F17C 2205/0161 ・・・・with wheels
F17C 2205/0165 ・・・・with handgrip
F17C 2205/0169 ・・・stackable
F17C 2205/0173 ・・・lockable
F17C 2205/0176 ・・・with ventilation
F17C 2205/018 ・・・Supporting feet
F17C 2205/0184 ・・・Attachments to the ground, e.g. mooring or anchoring
F17C 2205/0188 ・・・Hanging up devices
F17C 2205/0192 ・・・with external bearing means
F17C 2205/0196 ・・・with shock absorbing means
F17C 2205/03 ・Fluid connections, filters, valves, closure means or other attachments
F17C 2205/0302 ・・Fittings, valves, filters, or components in connection with the gas storage device
F17C 2205/0305 ・・・Bosses, e.g. boss collars
F17C 2205/0308 ・・・Protective caps
F17C 2205/0311 ・・・Closure means
F17C 2205/0314 ・・・・breakable, e.g. with burst discs
F17C 2205/0317 ・・・・fusing or melting
F17C 2205/032 ・・・・pierceable
F17C 2205/0323 ・・・Valves
F17C 2205/0326 ・・・・electrically actuated
F17C 2205/0329 ・・・・manually actuated
F17C 2205/0332 ・・・・Safety valves or pressure relief valves
F17C 2205/0335 ・・・・Check-valves or non-return valves
F17C 2205/0338 ・・・Pressure regulators
F17C 2205/0341 ・・・Filters
F17C 2205/0344 ・・・・Sinter type
F17C 2205/0347 ・・・・Active charcoal type
F17C 2205/035 ・・・Flow reducers
F17C 2205/0352 ・・・Pipes
F17C 2205/0355 ・・・・Insulation thereof
F17C 2205/0358 ・・・・coaxial
F17C 2205/0361 ・・・・corrugated
F17C 2205/0364 ・・・・flexible or articulated, e.g. a hose
F17C 2205/0367 ・・・・Arrangements in parallel
F17C 2205/037 ・・・Quick connecting means, e.g. couplings
F17C 2205/0373 ・・・・Adapters
F17C 2205/0376 ・・・Dispensing pistols
F17C 2205/0379 ・・・Manholes or access openings for human beings
F17C 2205/0382 ・・・Constructional details of valves, regulators
F17C 2205/0385 ・・・・in blocks or units
F17C 2205/0388 ・・Arrangement of valves, regulators, filters
F17C 2205/0391 ・・・inside the pressure vessel
F17C 2205/0394 ・・・in direct contact with the pressure vessel
F17C 2205/0397 ・・・・on both sides of the pressure vessel
F17C 2205/05 ・Vessel or content identifications, e.g. labels
F17C 2205/051 ・・by coating
F17C 2205/052 ・・by stickers
F17C 2205/054 ・・by bar codes
F17C 2205/055 ・・by magnetic means
F17C 2205/057 ・・by chips
F17C 2205/058 ・・by Radio Frequency Identification
F17C 2209/00 Vessel construction, in particular methods of manufacturing
F17C 2209/21 ・Shaping processes
F17C 2209/2109 ・・Moulding
F17C 2209/2118 ・・・by injection
F17C 2209/2127 ・・・by blowing
F17C 2209/2136 ・・・using wax moulds
F17C 2209/2145 ・・・by rotation
F17C 2209/2154 ・・Winding
F17C 2209/2163 ・・・with a mandrel
F17C 2209/2172 ・・Polishing
F17C 2209/2181 ・・Metal working processes, e.g. deep drawing, stamping or cutting
F17C 2209/219 ・・Working processes for non metal materials, e.g. extruding
F17C 2209/22 ・Assembling processes
F17C 2209/221 ・・Welding
F17C 2209/222 ・・・by friction
F17C 2209/224 ・・Press-fitting; Shrink-fitting
F17C 2209/225 ・・Spraying
F17C 2209/227 ・・by adhesive means
F17C 2209/228 ・・by screws, bolts or rivets
F17C 2209/23 ・Manufacturing of particular parts or at special locations
F17C 2209/232 ・・of walls
F17C 2209/234 ・・of closing end pieces, e.g. caps
F17C 2209/236 ・・・Apparatus therefore
F17C 2209/238 ・・Filling of insulants
F17C 2221/00 Handled fluid, in particular type of fluid
F17C 2221/01 ・Pure fluids
F17C 2221/011 ・・Oxygen
F17C 2221/012 ・・Hydrogen
F17C 2221/013 ・・Carbone dioxide
F17C 2221/014 ・・Nitrogen
F17C 2221/015 ・・Carbon monoxide
F17C 2221/016 ・・Noble gases (Ar, Kr, Xe)
F17C 2221/017 ・・・Helium
F17C 2221/018 ・・Acetylene
F17C 2221/03 ・Mixtures
F17C 2221/031 ・・Air
F17C 2221/032 ・・Hydrocarbons
F17C 2221/033 ・・・Methane, e.g. natural gas, CNG, LNG, GNL, GNC, PLNG
F17C 2221/035 ・・・Propane butane, e.g. LPG, GPL
F17C 2221/036 ・・・Hydrates
F17C 2221/037 ・・Containing polluant, e.g. H2S, Cl
F17C 2221/038 ・・Refrigerants
F17C 2221/05 ・Ultrapure fluid
F17C 2221/07 ・Hyperpolarised gases
F17C 2221/08 ・Ergols, e.g. hydrazine
Fluid contained in the vessel; Filling and discharging the fluidF17C 2223/00 Handled fluid before transfer, i.e. state of fluid when stored in the vessel or before transfer from the vessel
F17C 2223/01 ・characterised by the phase
F17C 2223/0107 ・・Single phase
F17C 2223/0115 ・・・dense or supercritical, i.e. at high pressure and high density
F17C 2223/0123 ・・・gaseous, e.g. CNG, GNC
F17C 2223/013 ・・・liquid
F17C 2223/0138 ・・・solid
F17C 2223/0146 ・・Two-phase
F17C 2223/0153 ・・・Liquefied gas, e.g. LPG, GPL
F17C 2223/0161 ・・・・cryogenic, e.g. LNG, GNL, PLNG
F17C 2223/0169 ・・・・subcooled
F17C 2223/0176 ・・・Solids and gas
F17C 2223/0184 ・・・Liquids and solids
F17C 2223/0192 ・・Three-phase, e.g. CO2 at triple point
F17C 2223/03 ・characterised by the pressure level
F17C 2223/031 ・・Not under pressure, i.e. containing liquids or solids only
F17C 2223/033 ・・Small pressure, e.g. for liquefied gas
F17C 2223/035 ・・High pressure (>10 bar)
F17C 2223/036 ・・Very high pressure (>80 bar)
F17C 2223/038 ・・Subatmospheric pressure
F17C 2223/04 ・characterised by other properties of handled fluid before transfer
F17C 2223/041 ・・Stratification
F17C 2223/042 ・・Localisation of the removal point
F17C 2223/043 ・・・in the gas
F17C 2223/045 ・・・・with a dip tube
F17C 2223/046 ・・・in the liquid
F17C 2223/047 ・・・・with a dip tube
F17C 2223/048 ・・・in the solid
F17C 2225/00 Handled fluid after transfer, i.e. state of fluid after transfer from the vessel
F17C 2225/01 ・characterised by the phase
F17C 2225/0107 ・・Single phase
F17C 2225/0115 ・・・dense or supercritical, i.e. at high pressure and high density
F17C 2225/0123 ・・・gaseous, e.g. CNG, GNC
F17C 2225/013 ・・・liquid
F17C 2225/0138 ・・・solid
F17C 2225/0146 ・・Two-phase
F17C 2225/0153 ・・・Liquefied gas, e.g. LPG, GPL
F17C 2225/0161 ・・・・cryogenic, e.g. LNG, GNL, PLNG
F17C 2225/0169 ・・・・subcooled
F17C 2225/0176 ・・・Solids and gas
F17C 2225/0184 ・・・Liquids and solids
F17C 2225/0192 ・・Three-phase, e.g. CO2 at triple point
F17C 2225/03 ・characterised by the pressure level
F17C 2225/031 ・・Not under pressure, i.e. containing liquids or solids only
F17C 2225/033 ・・Small pressure, e.g. for liquefied gas
F17C 2225/035 ・・High pressure, i.e. between 10 and 80 bars
F17C 2225/036 ・・Very high pressure, i.e. above 80 bars
F17C 2225/038 ・・Subatmospheric pressure
F17C 2225/04 ・characterised by other properties of handled fluid after transfer
F17C 2225/041 ・・Stratification
F17C 2225/042 ・・Localisation of the filling point
F17C 2225/043 ・・・in the gas
F17C 2225/044 ・・・・at several points, e.g. with a device for recondensing gas
F17C 2225/045 ・・・・with a dip tube
F17C 2225/046 ・・・in the liquid
F17C 2225/047 ・・・・with a dip tube
F17C 2225/048 ・・・in the solid
F17C 2227/00 Transfer of fluids, i.e. method or means for transferring the fluid; Heat exchange with the fluid
F17C 2227/01 ・Propulsion of the fluid
F17C 2227/0107 ・・by pressurising the ullage
F17C 2227/0114 ・・with vacuum injectors, e.g. venturi
F17C 2227/0121 ・・by gravity
F17C 2227/0128 ・・with pumps or compressors
F17C 2227/0135 ・・・Pumps
F17C 2227/0142 ・・・・with specified pump type, e.g. piston or impulsive type
F17C 2227/015 ・・・・with cooling of the pump
F17C 2227/0157 ・・・Compressors
F17C 2227/0164 ・・・・with specified compressor type, e.g. piston or impulsive type
F17C 2227/0171 ・・・Arrangement
F17C 2227/0178 ・・・・in the vessel
F17C 2227/0185 ・・・・comprising several pumps or compressors
F17C 2227/0192 ・・by using a working fluid
F17C 2227/03 ・Heat exchange with the fluid
F17C 2227/0302 ・・by heating
F17C 2227/0304 ・・・using an electric heater
F17C 2227/0306 ・・・using the same fluid
F17C 2227/0309 ・・・using another fluid
F17C 2227/0311 ・・・・Air heating
F17C 2227/0313 ・・・・・by forced circulation, e.g. using a fan
F17C 2227/0316 ・・・・Water heating
F17C 2227/0318 ・・・・・using seawater
F17C 2227/032 ・・・・・using geothermal water
F17C 2227/0323 ・・・・in a closed loop
F17C 2227/0325 ・・・by expansion using "Joule-Thompson" effect
F17C 2227/0327 ・・・with recovery of heat
F17C 2227/033 ・・・using solar energy
F17C 2227/0332 ・・・by burning a combustible
F17C 2227/0334 ・・・by radiation means
F17C 2227/0337 ・・by cooling
F17C 2227/0339 ・・・using the same fluid
F17C 2227/0341 ・・・using another fluid
F17C 2227/0344 ・・・・Air cooling
F17C 2227/0346 ・・・・・by forced circulation, e.g. using a fan
F17C 2227/0348 ・・・・Water cooling
F17C 2227/0351 ・・・・・using seawater
F17C 2227/0353 ・・・・using cryocooler
F17C 2227/0355 ・・・・in a closed loop
F17C 2227/0358 ・・・by expansion
F17C 2227/036 ・・・・"Joule-Thompson" effect
F17C 2227/0362 ・・・・in a turbine
F17C 2227/0365 ・・・with recovery of heat
F17C 2227/0367 ・・Localisation of heat exchange
F17C 2227/0369 ・・・in or on a vessel
F17C 2227/0372 ・・・・in the gas
F17C 2227/0374 ・・・・in the liquid
F17C 2227/0376 ・・・・in wall contact
F17C 2227/0379 ・・・・・inside the vessel
F17C 2227/0381 ・・・・・integrated in the wall
F17C 2227/0383 ・・・・・outside the vessel
F17C 2227/0386 ・・・・・・with a jacket
F17C 2227/0388 ・・・separate
F17C 2227/039 ・・・・on the pipes
F17C 2227/0393 ・・・・using a vaporiser
F17C 2227/0395 ・・・・using a submerged heat exchanger
F17C 2227/0397 ・・・characterised by fins
F17C 2227/04 ・Methods for emptying or filling
F17C 2227/041 ・・vessel by vessel
F17C 2227/042 ・・・with change-over from one vessel to another
F17C 2227/043 ・・by pressure cascade
F17C 2227/044 ・・by purging
F17C 2227/045 ・・by vacuum
F17C 2227/046 ・・by even emptying or filling
F17C 2227/047 ・・by repeating a process cycle
F17C 2227/048 ・・by maintaining residual pressure
F17C 2250/00 Accessories; Control means; Indicating, measuring or monitoring of parameters
F17C 2250/01 ・Intermediate tanks
F17C 2250/03 ・Control means
F17C 2250/032 ・・using computers
F17C 2250/034 ・・using wireless transmissions
F17C 2250/036 ・・using alarms
F17C 2250/038 ・・using cameras
F17C 2250/04 ・Indicating or measuring of parameters as input values
F17C 2250/0404 ・・Parameters indicated or measured
F17C 2250/0408 ・・・Level of content in the vessel
F17C 2250/0413 ・・・・with floats
F17C 2250/0417 ・・・・with electrical means
F17C 2250/0421 ・・・Mass or weight of the content of the vessel
F17C 2250/0426 ・・・Volume
F17C 2250/043 ・・・Pressure
F17C 2250/0434 ・・・・Pressure difference
F17C 2250/0439 ・・・Temperature
F17C 2250/0443 ・・・Flow or movement of content
F17C 2250/0447 ・・・Composition; Humidity
F17C 2250/0452 ・・・・Concentration of a product
F17C 2250/0456 ・・・・Calorific or heating value
F17C 2250/046 ・・・・Humidity
F17C 2250/0465 ・・・Vibrations, e.g. of acoustic type
F17C 2250/0469 ・・・Constraints, e.g. by gauges
F17C 2250/0473 ・・・Time or time periods
F17C 2250/0478 ・・・Position or presence
F17C 2250/0482 ・・・Acceleration
F17C 2250/0486 ・・Indicating or measuring characterised by the location
F17C 2250/0491 ・・・Parameters measured at or inside the vessel
F17C 2250/0495 ・・・the indicated parameter is a converted measured parameter
F17C 2250/06 ・Controlling or regulating of parameters as output values
F17C 2250/0605 ・・Parameters
F17C 2250/061 ・・・Level of content in the vessel
F17C 2250/0615 ・・・Mass or weight of the content of the vessel
F17C 2250/0621 ・・・Volume
F17C 2250/0626 ・・・Pressure
F17C 2250/0631 ・・・Temperature
F17C 2250/0636 ・・・Flow or movement of content
F17C 2250/0642 ・・・Composition; Humidity
F17C 2250/0647 ・・・・Concentration of a product
F17C 2250/0652 ・・・・Calorific or heating value
F17C 2250/0657 ・・・・Humidity
F17C 2250/0663 ・・・Vibrations, e.g. of acoustic type
F17C 2250/0668 ・・・Constraints, e.g. by jauges
F17C 2250/0673 ・・・Time or time periods
F17C 2250/0678 ・・・Position or presence
F17C 2250/0684 ・・・Acceleration
F17C 2250/0689 ・・Methods for controlling or regulating
F17C 2250/0694 ・・・with calculations
F17C 2250/07 ・Actions triggered by measured parameters
F17C 2250/072 ・・Action when predefined value is reached
F17C 2250/075 ・・・when full
F17C 2250/077 ・・・when empty
F17C 2260/00 Purposes of gas storage and gas handling
F17C 2260/01 ・Improving mechanical properties or manufacturing
F17C 2260/011 ・・Improving strength
F17C 2260/012 ・・Reducing weight
F17C 2260/013 ・・Reducing manufacturing time or effort
F17C 2260/015 ・・Facilitating maintenance
F17C 2260/016 ・・Preventing slosh
F17C 2260/017 ・・by calculation
F17C 2260/018 ・・Adapting dimensions
F17C 2260/02 ・Improving properties related to fluid or fluid transfer
F17C 2260/021 ・・Avoiding over pressurising
F17C 2260/022 ・・Avoiding overfilling
F17C 2260/023 ・・Avoiding overheating
F17C 2260/024 ・・Improving metering
F17C 2260/025 ・・Reducing transfer time
F17C 2260/026 ・・by calculation
F17C 2260/027 ・・Making transfer independent of vessel orientation
F17C 2260/028 ・・Avoiding unauthorised transfer
F17C 2260/03 ・Dealing with losses
F17C 2260/031 ・・due to heat transfer
F17C 2260/032 ・・・Avoiding freezing or defrosting
F17C 2260/033 ・・・by enhancing insulation
F17C 2260/035 ・・of fluid
F17C 2260/036 ・・・Avoiding leaks
F17C 2260/037 ・・・Handling leaked fluid
F17C 2260/038 ・・・Detecting leaked fluid
F17C 2260/04 ・Reducing risks and environmental impact
F17C 2260/042 ・・Reducing risk of explosion
F17C 2260/044 ・・Avoiding pollution or contamination
F17C 2260/046 ・・Enhancing energy recovery
F17C 2260/048 ・・Refurbishing
F17C 2260/05 ・Improving chemical properties
F17C 2260/053 ・・Reducing corrosion
F17C 2260/056 ・・Improving fluid characteristics
Purposes or effectsF17C 2265/00 Effects achieved by gas storage or gas handling
F17C 2265/01 ・Purifying the fluid
F17C 2265/012 ・・by filtering
F17C 2265/015 ・・by separating
F17C 2265/017 ・・・different phases of a same fluid
F17C 2265/02 ・Mixing fluids
F17C 2265/022 ・・identical fluid
F17C 2265/025 ・・different fluids
F17C 2265/027 ・・・with odorizing
F17C 2265/03 ・Treating the boil-off
F17C 2265/031 ・・by discharge
F17C 2265/032 ・・by recovery
F17C 2265/033 ・・・with cooling
F17C 2265/034 ・・・・with condensing the gas phase
F17C 2265/035 ・・・・with subcooling the liquid phase
F17C 2265/036 ・・・with heating
F17C 2265/037 ・・・with pressurising
F17C 2265/038 ・・・with expanding
F17C 2265/04 ・using an independent energy source, e.g. battery
F17C 2265/05 ・Regasification
F17C 2265/06 ・Fluid distribution
F17C 2265/061 ・・for supply of supplying vehicles
F17C 2265/063 ・・for supply of refueling stations
F17C 2265/065 ・・for refueling vehicle fuel tanks
F17C 2265/066 ・・for feeding engines for propulsion
F17C 2265/068 ・・Distribution pipeline networks
F17C 2265/07 ・Generating electrical power as side effect
F17C 2270/00 Applications
F17C 2270/01 ・for fluid transport or storage
F17C 2270/0102 ・・on or in the water
F17C 2270/0105 ・・・Ships
F17C 2270/0107 ・・・・Wall panels
F17C 2270/011 ・・・Barges
F17C 2270/0113 ・・・・floating
F17C 2270/0115 ・・・・immerged
F17C 2270/0118 ・・・Offshore
F17C 2270/0121 ・・・・Platforms
F17C 2270/0123 ・・・・Terminals
F17C 2270/0126 ・・・・Buoys
F17C 2270/0128 ・・・・Storage in depth
F17C 2270/0131 ・・・Submarines
F17C 2270/0134 ・・placed above the ground
F17C 2270/0136 ・・・Terminals
F17C 2270/0139 ・・・Fuel stations
F17C 2270/0142 ・・placed underground
F17C 2270/0144 ・・・Type of cavity
F17C 2270/0147 ・・・・by burying vessels
F17C 2270/0149 ・・・・by digging cavities
F17C 2270/0152 ・・・・・Salt caverns
F17C 2270/0155 ・・・・by using natural cavities
F17C 2270/0157 ・・・Location of cavity
F17C 2270/016 ・・・・onshore
F17C 2270/0163 ・・・・offshore
F17C 2270/0165 ・・on the road
F17C 2270/0168 ・・・by vehicles
F17C 2270/0171 ・・・・Trucks
F17C 2270/0173 ・・・・Railways
F17C 2270/0176 ・・・・Buses
F17C 2270/0178 ・・・・Cars
F17C 2270/0181 ・・・Airbags
F17C 2270/0184 ・・・Fuel cells
F17C 2270/0186 ・・in the air or in space
F17C 2270/0189 ・・・Planes
F17C 2270/0192 ・・・Hot air balloons
F17C 2270/0194 ・・・for use under microgravity conditions, e.g. space
F17C 2270/0197 ・・・Rockets
F17C 2270/02 ・for medical applications
F17C 2270/025 ・・Breathing
F17C 2270/05 ・for industrial use
F17C 2270/0509 ・・"Dewar" vessels
F17C 2270/0518 ・・Semiconductors
F17C 2270/0527 ・・Supra-conductors
F17C 2270/0536 ・・・Magnetic resonance imaging
F17C 2270/0545 ・・Tools
F17C 2270/0554 ・・Hydraulic applications
F17C 2270/0563 ・・Pneumatic applications
F17C 2270/0572 ・・Isostatic presses
F17C 2270/0581 ・・Power plants
F17C 2270/059 ・・Mass botteling, e.g. merry belts
F17C 2270/07 ・for household use
F17C 2270/0709 ・・Camping gas
F17C 2270/0718 ・・Aerosols
F17C 2270/0727 ・・Thermos flasks
F17C 2270/0736 ・・Capsules, e.g. CO2
F17C 2270/0745 ・・Gas bottles
F17C 2270/0754 ・・Fire extinguishers
F17C 2270/0763 ・・Fuel cells
F17C 2270/0772 ・・Inflation devices, e.g. for rescue vests or tyres
F17C 2270/0781 ・・Diving equipments
F17C 2270/079 ・・Respiration devices for rescuing
--- Edited by Muguruma Professional Engineer Office(C), 2013 ---