WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

B05B　SPRAYING APPARATUS; ATOMISING APPARATUS; NOZZLES ({sprayers or atomisers specially adapted for therapeutic purposes A61M 11/00}; spray-mixers with nozzles B01F 5/20; processes for applying liquids or other fluent materials to surfaces by spraying B05D; {nozzles specially adapted for injection moulding of plastics or substances in a plastic state B29C 45/1603, B29C 45/20; nozzles specially adapted for windscreen washers B60S 1/52}; means for pumping fluids F04; valves, e.g. water-taps, F16K)

B05B 1/00 Nozzles, spray heads or other outlets, with or without auxiliary devices such as valves, heating means (B05B 3/00, B05B 5/00, B05B 7/00 take precedence; {nozzles for baths with water or gas jets A61H 33/00, e.g. A61H 33/6063, A61H 33/00N2, A61H 33/026 or A61H 33/027; Nozzles specially adapted for fire-extinguishing A62C 31/02; Nozzles for generating high velocity abrasive fluid jets B24C 5/04}; nozzles for jet-ink printing mechanisms B41J 2/135; {Nozzles for filling containers B65B 39/00;} nozzles for liquid-dispensing, e.g. in vehicle service stations B67D 5/37)

B05B 1/005 ・{Nozzles or other outlets specially adapted for discharging one or more gases} nnn

B05B 1/02 ・designed to produce a jet, spray, or other discharge of particular shape or nature, e.g. in single drops, {or having an outlet of particular shape}(B05B 1/26, B05B 1/28, B05B 1/34 take precedence)

B05B 1/04 ・・in flat form, e.g. fan-like, sheet-like

B05B 1/042 ・・・{Outlets having two planes of symmetry perpendicular to each other, one of them defining the plane of the jet (B05B 1/044, B05B 1/046 take precedence)}

B05B 1/044 ・・・{Slits, i.e. narrow openings defined by two straight and parallel lips; Elongated outlets for producing very wide discharges, e.g. fluid curtains (B05B 1/046 takes precedence)}

B05B 1/046 ・・・{Outlets formed, e.g. cut, in the circumference of tubular or spherical elements}

B05B 1/048 ・・・{having a flow conduit with, immediately behind the outlet orifice, an elongated cross section, e.g. of oval or elliptic form, of which the major axis is perpendicular to the plane of the jet}

B05B 1/06 ・・in annular, tubular or hollow conical form

B05B 1/08 ・・of pulsating nature, e.g. delivering liquid in successive separate quantities; {Fluidic oscillators}

B05B 1/083 ・・・{the pulsating mechanism comprising movable parts (liquid driven rotating elements, e.g. turbines, arranged upstream the outlet B05B 3/04)}

B05B 1/086 ・・・・{with a resiliently deformable element, e.g. sleeve}

B05B 1/10 ・・in the form of a fine jet, e.g. for use in wind-screen washers

B05B 1/12 ・capable of producing different kinds of discharge, e.g. either jet or spray (B05B 1/16 takes precedence)

B05B 1/14 ・with multiple outlet openings (B05B 1/02, B05B 1/26 take precedence); with strainers in or outside the outlet opening

B05B 1/16 ・・having selectively- effective outlets

B05B 1/1609 ・・・{with a selecting mechanism comprising a lift valve (B05B 1/1681 takes precedence; lift valves in general F16K 1/00)}

B05B 1/1618 ・・・・{where said valve is a double-seat lift valve}

B05B 1/1627 ・・・{with a selecting mechanism comprising a gate valve, a sliding valve or a cock (B05B 1/1681 takes precedence; gate valves or sliding valves in general F16K 3/00; cocks in general F16K 5/00)}

B05B 1/1636 ・・・・{by relative rotative movement of the valve elements (B05B 1/1672 takes precedence)}

B05B 1/1645 ・・・・・{the outlets being rotated during selection}

B05B 1/1654 ・・・・・・{about an axis parallel to the liquid passage in the stationary valve element}

B05B 1/1663 ・・・・{by relative translatory movement of the valve elements (B05B 1/1672 takes precedence)}

B05B 1/1672 ・・・・{the selectively-effective outlets being arranged on a tube or pipe}

B05B 1/1681 ・・・{with a selecting mechanism comprising a gate valve, sliding valve or cock and a lift valve}

B05B 1/169 ・・・{having three or more selectively effective outlets}

B05B 1/18 ・・Roses; Shower heads {(with means for adding soap or the like E03C 1/046; jet regulators E03C 1/08)}

B05B 1/185 ・・・{characterised by their outlet element; Mounting arrangements therefor}

B05B 1/20 ・・{Arrangements of several outlets along elongated bodies, e.g.} perforated pipes or troughs, e.g. spray booms {(spray booms for agricultural uses A01M 7/0071; spray bars for treating roads E01C 19/176)}; Outlet elements therefor

B05B 1/202 ・・・{comprising inserted outlet elements (B05B 1/205 takes precedence)}

B05B 1/205 ・・・{characterised by the longitudinal shape of the elongated body}

B05B 1/207 ・・・・{the elongated body being a closed loop}

B05B 1/22 ・Spouts (anti-splash devices for water-taps E03C 1/08)

B05B 1/24 ・incorporating means for heating the liquid or other fluent material, e.g. electrically

B05B 1/26 ・with means for mechanically breaking-up or deflecting the jet after discharge, e.g. with fixed deflectors; Breaking-up the discharged liquid or other fluent material by impinging jets

B05B 1/262 ・・{with fixed deflectors}

B05B 1/265 ・・・{the liquid or other fluent material being symmetrically deflected about the axis of the nozzle}

B05B 1/267 ・・・{the liquid or other fluent material being deflected in determined directions}

B05B 1/28 ・with integral means for shielding the discharged liquid or other fluent material, e.g. to limit area of spray; with integral means for catching drips or collecting surplus liquid or other fluent material (means for any of these purposes, per se, B05B 15/04)

B05B 1/30 ・designed to control volume of flow, e.g. with adjustable passages

B05B 1/3006 ・・{the controlling element being actuated by the pressure of the fluid to be sprayed (B05B 11/0062 takes precedence)}

B05B 1/3013 ・・{the controlling element being a lift valve (B05B 1/3006, B05B 1/3033 take precedence; lift valves in general F16K 1/00)}

B05B 1/302 ・・・{with a ball-shaped valve member (ball valves in general F16K 1/14)}

B05B 1/3026 ・・{the controlling element being a gate valve, a sliding valve or a cock (B05B 1/3006, B05B 1/326 take precedence; gate valves or sliding valves in general F16K 3/00; cocks in general F16K 5/00)}

B05B 1/3033 ・・{the control being effected by relative coaxial longitudinal movement of the controlling element and the spray head (B05B 1/3026 takes precedence)}

B05B 1/304 ・・・{the controlling element being a lift valve}

B05B 1/3046 ・・・・{the valve element, e.g. a needle, co-operating with a valve seat located downstream of the valve element and its actuating means, generally in the proximity of the outlet orifice (B05B 1/308 takes precedence)}

B05B 1/3053 ・・・・・{the actuating means being a solenoid}

B05B 1/306 ・・・・・{the actuating means being a fluid}{WARNING Not complete, see B05B 1/3046}

B05B 1/3066 ・・・・・{the valve element being at least partially hollow and liquid passing through it when the valve is opened}

B05B 1/3073 ・・・{the controlling element being a deflector acting as a valve in co-operation with the outlet orifice (B05B 1/308 takes precedence; deflectors per se B05B 1/262)}

B05B 1/308 ・・・{the controlling element comprising both a lift valve and a deflector}

B05B 1/3086 ・・・{the controlling element being a grooved body, which is movable in the outlet orifice}

B05B 1/3093 ・・{Recirculation valves, i.e. the valve element opens a passage to the nozzle and simultaneously closes at least partially a return passage the feeding means}

B05B 1/32 ・・in which a valve member forms part of the outlet opening {(B05B 1/3033 takes precedence)}

B05B 1/323 ・・・{the valve member being actuated by the pressure of the fluid to be sprayed (B05B 11/0062 takes precedence)}

B05B 1/326 ・・・{the valve being a gate valve, a sliding valve or a cock}

B05B 1/34 ・designed to influence the nature of flow of the liquid or other fluent material, e.g. to produce swirl (B05B 1/30 takes precedence)

B05B 1/3405 ・・{to produce swirl}

B05B 1/341 ・・・{before discharging the liquid or other fluent material, e.g. in a swirl chamber upstream the spray outlet}

B05B 1/3415 ・・・・{with swirl imparting inserts upstream of the swirl chamber}

B05B 1/3421 ・・・・{with channels emerging substantially tangentially in the swirl chamber}

B05B 1/3426 ・・・・・{the channels emerging in the swirl chamber perpendicularly to the outlet axis (B05B 1/3436 takes precedence)}

B05B 1/3431 ・・・・・{the channels being formed at the interface of cooperating elements, e.g. by means of grooves}

B05B 1/3436 ・・・・・・{the interface being a plane perpendicular to the outlet axis}

B05B 1/3442 ・・・・・・{the interface being a cone having the same axis as the outlet}

B05B 1/3447 ・・・・・・{the interface being a cylinder having the same axis as the outlet}

B05B 1/3452 ・・・・・・{the cooperating elements being movable, e.g. adjustable relative to one another}

B05B 1/3457 ・・・・・・・{in response to liquid pressure}

B05B 1/3463 ・・・・・{the channels extending outwardly, e.g. radially from the inside to the outside}

B05B 1/3468 ・・・・{with means for controlling the flow of liquid entering or leaving the swirl chamber (B05B 1/3452 takes precedence)}

B05B 1/3473 ・・・・・{in response to liquid pressure}

B05B 1/3478 ・・・・{the liquid flowing at least two different courses before reaching the swirl chamber}

B05B 1/3484 ・・・・{with a by-pass conduit extending from the swirl chamber}

B05B 1/3489 ・・・・{Nozzles having concentric outlets}

B05B 1/3494 ・・・・{the discharge outlet being not on the axis of the swirl chamber}

B05B 1/36 ・Outlets for discharging by overflow

B05B 3/00 Spraying or sprinkling apparatus with moving outlet elements or moving deflecting elements; {Spraying or sprinkling heads with rotating elements located upstream the outlet}

B05B 3/001 ・{incorporating means for heating or cooling, e.g. the material to be sprayed}

B05B 3/002 ・{comprising a moving member supported by a fluid cushion}

B05B 3/003 ・{with braking means, e.g. friction rings designed to provide a substantially constant revolution speed}

B05B 3/005 ・・{using viscous dissipation, e.g. a rotor movable in a chamber filled with oil}

B05B 3/006 ・・{using induced currents; using magnetic means}

B05B 3/007 ・{with friction clutch means}

B05B 3/008 ・{comprising a wobbling or nutating element, i.e. rotating about an axis describing a cone during spraying (B05B 3/0463 takes precedence)}

B05B 3/02 ・with rotating elements

B05B 3/021 ・・{with means for regulating the jet relative to the horizontal angular position of the nozzle, e.g. for spraying non circular areas by changing the elevation of the nozzle or by varying the nozzle flow-rate (B05B 3/0454 takes precedence)}

B05B 3/022 ・・{the rotating deflecting element being a ventilator or a fan (B05B 3/105 takes precedence; agricultural atomisers or mist blowers A01M 7/0003)}

B05B 3/023 ・・{comprising a pneumatic motor actuated by a depression created by the liquid flow}

B05B 3/025 ・・{Rotational joints}

B05B 3/026 ・・・{the fluid passing axially from one joint element to another}

B05B 3/027 ・・・{with radial fluid passages}

B05B 3/028 ・・{the rotation being orbital (B05B 3/0445 and B05B 3/066 take precedence)}

B05B 3/04 ・・driven by the liquid or other fluent material discharged, e.g. the liquid actuating a motor before passing to the outlet {(B05B 3/023 takes precedence)}

B05B 3/0404 ・・・{the motor comprising a movable ball}

B05B 3/0409 ・・・{with moving, e.g. rotating, outlet elements (B05B 3/0486, B05B 3/06 take precedence)}

B05B 3/0413 ・・・・{comprising a liquid driven piston motor}

B05B 3/0418 ・・・・{comprising a liquid driven rotor, e.g. a turbine (B05B 3/0463, B05B 3/0468 take precedence)}

B05B 3/0422 ・・・・・{with rotating outlet elements}

B05B 3/0427 ・・・・・・{the outlet elements being directly attached to the rotor or being an integral part of it}

B05B 3/0431 ・・・・・・{the rotative movement of the outlet elements being reversible (B05B 3/0445 takes precedence)}

B05B 3/0436 ・・・・・・・{by reversing the direction of rotation of the rotor itself}

B05B 3/044 ・・・・・・・{Tubular elements holding several outlets, e.g. apertured tubes, oscillating about an axis substantially parallel to the tubular element}

B05B 3/0445 ・・・・・・{the movement of the outlet elements being a combination of two movements, one being rotational}

B05B 3/045 ・・・・・・{with automatic means for regulating the jet (B05B 3/0445 takes precedence)}

B05B 3/0454 ・・・・・・・{relative to the angular position of the outlet or to the direction of rotation of the outlet, e.g. for spraying non circular areas}

B05B 3/0459 ・・・・・・{the rotor axis not being parallel to the rotation axis of the outlet, e.g. being perpendicular thereto}

B05B 3/0463 ・・・・{Rotor nozzles, i.e. nozzles consisting of an element having an upstream part rotated by the liquid flow, and a downstream part connected to the apparatus by a universal joint}

B05B 3/0468 ・・・・{the liquid actuating a motor after passing the spray outlet (B05B 3/0472 takes precedence)}

B05B 3/0472 ・・・・{the spray jet actuating a movable deflector which is successively moved out of the jet by jet action and brought back into the jet by spring action}

B05B 3/0477 ・・・・・{the spray outlet having a reversible rotative movement, e.g. for covering angular sector smaller than 360°}

B05B 3/0481 ・・・・・{Impact motive means}

B05B 3/0486 ・・・{the spray jet being generated by a rotary deflector rotated by liquid discharged onto it in a direction substantially parallel its rotation axis}

B05B 3/049 ・・・{comprising mechanical means for preventing a rotor from rotating despite being submerged in a streaming fluid}

B05B 3/0495 ・・・{the liquid or other fluent material discharged powering several motors, e.g. several turbines}

B05B 3/06 ・・・by jet reaction, {i.e. creating a spinning torque due to a tangential component of the jet}

B05B 3/063 ・・・・{using a member, e.g. a deflector, for creating the tangential component of the jet}

B05B 3/066 ・・・・{the movement of the outlet elements being a combination of two movements, one being rotational}

B05B 3/08 ・・in association with stationary outlet or deflecting elements

B05B 3/082 ・・・{the spraying being effected by centrifugal forces}

B05B 3/085 ・・・・{in association with sectorial deflectors}

B05B 3/087 ・・・・・{Spray guns comprising this arrangement}

B05B 3/10 ・・discharging over substantially the whole periphery of the rotating member, {i.e. the spraying being effected by centrifugal forces (B05B 3/082 takes precedence)}

B05B 3/1007 ・・・{characterised by the rotating member (B05B 3/105 takes precedence)}

B05B 3/1014 ・・・・{with a spraying edge, e.g. like a cup or a bell}

B05B 3/1021 ・・・・{with individual passages at its periphery}

B05B 3/1028 ・・・・・{the passages comprising an insert}

B05B 3/1035 ・・・{Driving means; Parts thereof, e.g. turbine, shaft, bearings}

B05B 3/1042 ・・・・{Means for connecting, e.g. reversibly, the rotating spray member to its driving shaft}

B05B 3/105 ・・・{Fan or ventilator arrangements therefor}

B05B 3/1057 ・・・{with at least two outlets, other than gas and cleaning fluid outlets, for discharging, selectively or not, different or identical liquids or other fluent materials on the rotating element}

B05B 3/1064 ・・・{the liquid or other fluent material to be sprayed being axially supplied to the rotating member through a hollow rotating shaft}

B05B 3/1071 ・・・{with two rotating members rotating at different speeds}

B05B 3/1078 ・・・・{the rotating members rotating in opposite directions}

B05B 3/1085 ・・・{with means for detecting or controlling the rotational speed}

B05B 3/1092 ・・・{Means for supplying shaping gas}

B05B 3/12 ・・with spray booms or the like rotating around an axis by means independent of the liquid or other fluent material discharged

B05B 3/14 ・with oscillating elements; with intermittent operation

B05B 3/16 ・・driven or controlled by the liquid or other fluent material discharged, e.g. the liquid actuating a motor before passing to the outlet {(B05B 3/0431, B05B 3/0468, B05B 3/0472 take precedence)}

B05B 3/165 ・・・{by impact motive means, e.g. of hammer type}

B05B 3/18 ・with elements moving in a straight line, e.g. along a track; Mobile sprinklers {(watering arrangements making use of movable installations A01G 25/09)}

B05B 5/00 Electrostatic spraying apparatus; Spraying apparatus with means for charging the spray electrically; Apparatus for spraying liquids or other fluent materials by other electric means

B05B 5/001 ・{incorporating means for heating or cooling, e.g. the material to be sprayed}

B05B 5/002 ・{comprising means for neutralising the spray of charged droplets or particules}

B05B 5/003 ・・{by mixing two sprays of opposite polarity}

B05B 5/004 ・・{by alternating the polarity of the spray}

B05B 5/005 ・{the high voltage supplied to an electrostatic spraying apparatus being adjustable during spraying operation, e.g. for modifying spray width, droplet size}

B05B 5/006 ・・{the adjustement of high voltage is responsive to a condition, e.g. a condition of material discharged, of ambient medium or of target}

B05B 5/007 ・{the high voltage supplied to an electrostatic spraying apparatus during spraying operation being periodical or in time, e.g. sinusoidal}

B05B 5/008 ・・{with periodical change of polarity}

B05B 5/025 ・Discharge apparatus, e.g. electrostatic spray guns

B05B 5/0255 ・・{spraying and depositing by electrostatic forces only}

B05B 5/03 ・・characterised by the use of gas, {e.g. electrostatically assisted pneumatic spraying (B05B 5/04, B05B 5/043, B05B 5/047 take precedence)}

B05B 5/032 ・・・{for spraying particulate materials}

B05B 5/035 ・・characterised by gasless spraying, {e.g. electrostatically assisted airless spraying (B05B 5/04, B05B 5/043, B05B 5/047 take precedence)}

B05B 5/04 ・・characterised by having rotary outlet or deflecting elements, {i.e. spraying being also effected by centrifugal forces}

B05B 5/0403 ・・・{characterised by the rotating member}

B05B 5/0407 ・・・・{with a spraying edge, e.g. like a cup or a bell}

B05B 5/0411 ・・・・{with individual passages at its periphery}

B05B 5/0415 ・・・{Driving means; Parts thereof, e.g. turbine, shaft, bearings}

B05B 5/0418 ・・・{designed for spraying particulate material}

B05B 5/0422 ・・・{comprising means for controlling speed of rotation}

B05B 5/0426 ・・・{Means for supplying shaping gas}

B05B 5/043 ・・using induction-charging

B05B 5/047 ・・using tribo-charging

B05B 5/053 ・・Arrangements for supplying power, e.g. charging power

B05B 5/0531 ・・・{Power generators}

B05B 5/0532 ・・・・{driven by a gas turbine}

B05B 5/0533 ・・・{Electrodes specially adapted therefor; Arrangements of electrodes}

B05B 5/0535 ・・・・{at least two electrodes having different potentials being held on the discharge apparatus, one of them being a charging electrode of the corona type located in the spray or close to it, and another being of the non-corona type located outside of the path for the material}

B05B 5/0536 ・・・・{Dimensional characteristics of electrodes, e.g. diameter or radius of curvature of a needle-like corona electrode}

B05B 5/0537 ・・・{comprising a charge return path between the target and the spraying apparatus which is not the "true" earth, i.e. using a direct charge return path like a wire or the like, e.g. "floating earth}"

B05B 5/0538 ・・・{the operator being part of a charge return path between target and apparatus}

B05B 5/057 ・・Arrangements for discharging liquids or other fluent material without using a gun or nozzle

B05B 5/06 ・using electric arc

B05B 5/08 ・Plant for applying liquids or other fluent materials to objects

B05B 5/081 ・・{specially adapted for treating particulate materials}

B05B 5/082 ・・{characterised by means for supporting, holding or conveying the objects}

B05B 5/084 ・・・{the objects lying on, or being supported above conveying means, e.g. conveyor belts}{WARNING: not complete, see B05B 5/08 and subgroups}

B05B 5/085 ・・{the plant being provided on a vehicle}

B05B 5/087 ・・{Arrangements of electrodes, e.g. of charging, shielding, collecting electrodes (B05B 5/12, B05B 5/14 take precedence; Arrangements of electrodes on the discharge apparatus B05B 5/0533)}

B05B 5/088 ・・・{for creating electric field curtains}

B05B 5/10 ・・Arrangements for supplying power, e.g. charging power (B05B 5/053 takes precedence)

B05B 5/12 ・・specially adapted for coating the interior of hollow bodies

B05B 5/14 ・・specially adapted for coating continuously moving elongated bodies, e.g. wires, strips, pipes

B05B 5/16 ・Arrangements for supplying liquids or other fluent material

B05B 5/1608 ・・{the liquid or other fluent material being electrically conductive}

B05B 5/1616 ・・・{and the arrangement comprising means for insulating a grounded material source from high voltage applied to the material}

B05B 5/1625 ・・・・{the insulating means comprising an intermediate container alternately connected to the grounded material source for filling, and then disconnected and electrically insulated therefrom}

B05B 5/1633 ・・・・・{the arrangement comprising several supply lines arranged in parallel, each comprising such an intermediate container}

B05B 5/1641 ・・・・・{an additional container being provided downstream the intermediate container}

B05B 5/165 ・・・・{by dividing the material into discrete quantities, e.g. droplets}

B05B 5/1658 ・・・・{Details }

B05B 5/1666 ・・・・・{Voltage blocking valves, e.g. with axially separable coupling elements}

B05B 5/1675 ・・・{the supply means comprising a piston, e.g. a piston pump}

B05B 5/1683 ・・{specially adapted for particulate materials}

B05B 5/1691 ・・{Apparatus to be carried on or by a person or with a container fixed to the discharge device}

B05B 7/00 Spraying apparatus for discharge of liquids or other fluent materials from two or more sources, e.g. of liquid and air, of powder and gas (B05B 3/00, B05B 5/00{B05B 11/06} take precedence; outlets not specially modified for two media B05B 1/00)

B05B 7/0006 ・{Spraying by means of explosions}

B05B 7/0012 ・{Apparatus for achieving spraying before discharge from the apparatus}

B05B 7/0018 ・{with devices for making foam}

B05B 7/0025 ・・{with a compressed gas supply}

B05B 7/0031 ・・・{with disturbing means promoting mixing, e.g. balls, crowns}

B05B 7/0037 ・・・・{including sieves, porous members or the like}

B05B 7/0043 ・・・・{including a plurality of individual elements, e.g. needles, baffles, rotatable blades}

B05B 7/005 ・・{wherein ambient air is aspirated by a liquid flow}

B05B 7/0056 ・・・{with disturbing means promoting mixing, e.g. balls, crowns}

B05B 7/0062 ・・・・{including sieves, porous members or the like}

B05B 7/0068 ・・・・{including a plurality of individual elements, e.g. needles, baffles, rotatable blades}

B05B 7/0075 ・{Nozzle arrangements in gas streams}

B05B 7/0081 ・{Apparatus supplied with low pressure gas, e.g. "hvlp"-guns; air supplied by a fan}

B05B 7/0087 ・・{Atmospheric air being sucked by a gas stream, generally flowing through a venturi, at a location upstream or inside the spraying apparatus}

B05B 7/0093 ・{At least a part of the apparatus, e.g. a container, being provided with means, e.g. wheels or casters for allowing its displacement relative to the ground}

B05B 7/02 ・Spray pistols; Apparatus for discharge (B05B 7/14, B05B 7/16, B05B 7/24 take precedence)

B05B 7/025 ・・{Nozzles having elongated outlets, e.g. slots, for the material to be sprayed}

B05B 7/04 ・・with arrangements for mixing liquids or other fluent materials before discharge (mixing in general B01F, e.g. B01F 5/00; mixing valves F16K 11/00)

B05B 7/0408 ・・・{with arrangements for mixing two or more liquids}

B05B 7/0416 ・・・{with arrangements for mixing one gas and one liquid}

B05B 7/0425 ・・・・{without any source of compressed gas, e.g. the air being sucked by the pressurised liquid}

B05B 7/0433 ・・・・{with one inner conduit of gas surrounded by an external conduit of liquid upstream the mixing chamber}

B05B 7/0441 ・・・・{with one inner conduit of liquid surrounded by an external conduit of gas upstream the mixing chamber}

B05B 7/045 ・・・・・{the gas and liquid flows being parallel just upstream the mixing chamber (B05B 7/0458, B05B 7/0466 take precedence)}

B05B 7/0458 ・・・・・{the gas and liquid flows being perpendicular just upstream the mixing chamber}

B05B 7/0466 ・・・・・{with means for deflecting the central liquid flow towards the peripheral gas flow}

B05B 7/0475 ・・・・・{with means for deflecting the peripheral gas flow towards the central liquid flow (B05B 7/0458 takes precedence)}

B05B 7/0483 ・・・・{with gas and liquid jets intersecting in the mixing chamber}

B05B 7/0491 ・・・・{the liquid and the gas being mixed at least twice along the flow path of the liquid}

B05B 7/06 ・・with {at least} one outlet orifice surrounding another approximately in the same plane

B05B 7/061 ・・・{with several liquid outlets discharging one or several liquids}

B05B 7/062 ・・・{with only one liquid outlet and at least one gas outlet}

B05B 7/063 ・・・・{one fluid being sucked by the other}

B05B 7/064 ・・・・・{the liquid being sucked by the gas}

B05B 7/065 ・・・・{an inner gas outlet being surrounded by an annular adjacent liquid outlet}

B05B 7/066 ・・・・{with an inner liquid outlet surrounded by at least one annular gas outlet}

B05B 7/067 ・・・・・{the liquid outlet being annular}

B05B 7/068 ・・・・・{the annular gas outlet being supplied by a gas conduit having an axially concave curved internal surface just upstream said outlet}

B05B 7/08 ・・with separate outlet orifices, e.g. to form parallel jets, {i.e. the axis of the jets being parallel}, to form intersecting jets, {i.e. the axis of the jets converging but not necessarily intersecting at a point}

B05B 7/0807 ・・・{to form intersecting jets}

B05B 7/0815 ・・・・{with at least one gas jet intersecting a jet constituted by a liquid or a mixture containing a liquid for controlling the shape of the latter}

B05B 7/0823 ・・・・・[N: comprising a rotatable spray pattern adjusting plate controlling the flow rate of the spray shaping gas jets

B05B 7/083 ・・・・・{comprising rotatable spray shaping gas jet outlets}

B05B 7/0838 ・・・・・{comprising a single means controlling simultaneously the flow rates of shaping and spraying gas jets}

B05B 7/0846 ・・・・{with jets being only jets constituted by a liquid or a mixture containing a liquid}

B05B 7/0853 ・・・・{with one single gas jet and several jets constituted by a liquid or a mixture containing a liquid (B05B 7/0815 takes precedence)}

B05B 7/0861 ・・・・{with one single jet constituted by a liquid or a mixture containing a liquid and several gas jets (B05B 7/0815 takes precedence)}

B05B 7/0869 ・・・{the liquid or other fluent material being sucked or aspirated from an outlet orifice by another fluid, e.g. a gas, coming from another outlet orifice}

B05B 7/0876 ・・・{to form parallel jets constituted by a liquid or a mixture containing a liquid (B05B 7/0884, B05B 7/0892 take precedence)}

B05B 7/0884 ・・・{the outlet orifices for jets constituted by a liquid or a mixture containing a liquid being aligned}

B05B 7/0892 ・・・{the outlet orifices for jets constituted by a liquid or a mixture containing a liquid being disposed on a circle}

B05B 7/10 ・・producing a swirling discharge

B05B 7/12 ・・designed to control volume of flow, e.g. with adjustable passages

B05B 7/1209 ・・・{the controlling means for each liquid or other fluent material being manual and interdependent}

B05B 7/1218 ・・・・{With means for adjusting or modifying the action of the controlling means}

B05B 7/1227 ・・・・{Non linear relationship between the controlling means displacement and the valve element displacement}

B05B 7/1236 ・・・・{with three or more interdependent valves}

B05B 7/1245 ・・・・{A gas valve being opened before a liquid valve}

B05B 7/1254 ・・・{the controlling means being fluid actuated}

B05B 7/1263 ・・・・{pneumatically actuated}{WARNING Not complete, see B05B 7/1254}

B05B 7/1272 ・・・・・{actuated by gas involved in spraying, i.e. exiting the nozzle, e.g. as a spraying or jet shaping gas}{WARNING Not complete, see B05B 7/1254}

B05B 7/129 ・・・{Hand guns comprising a gas valve located at the bottom of the handle (B05B 7/0087 takes precedence)}

B05B 7/14 ・designed for spraying particulate materials (B05B 7/16 takes precedence)

B05B 7/1404 ・・{Arrangements for supplying particulate material}

B05B 7/1409 ・・・{specially adapted for short fibres or chips (B05B 7/145 takes precedence)}

B05B 7/1413 ・・・{Apparatus to be carried on or by a person, e.g. by hand; Apparatus comprising a container fixed to the discharge device}

B05B 7/1418 ・・・・{comprising means for supplying an additional liquid}

B05B 7/1422 ・・・・{the means for supplying particulate material comprising moving mechanical means, e.g. to impart vibration}

B05B 7/1427 ・・・・{Apparatus to be carried on the back of the user}

B05B 7/1431 ・・・{comprising means for supplying an additional liquid (B05B 7/1418 takes precedence)}

B05B 7/1436 ・・・・{to a container where the particulate material and the additional liquid are brought together (Mixing in general B01F)}

B05B 7/144 ・・・{the means for supplying particulate material comprising moving mechanical means (B05B 7/1422, B05B 7/1459 take precedence)}

B05B 7/1445 ・・・・{involving vibrations (B05B 7/145 takes precedence)}

B05B 7/145 ・・・・{specially adapted for short fibres or chips}

B05B 7/1454 ・・・{comprising means for supplying collected oversprayed particulate material (spray booth with arrangements for collecting oversprayed material B05B 15/1225)}

B05B 7/1459 ・・・{comprising a chamber, inlet and outlet valves upstream and downstream the chamber and means for alternately sucking particulate material into and removing particulate material from the chamber through the valves (conveying material in bulk by using a combination of gas pressure and suction B65G 53/28; pumps in general F04B; apparatus for repeatedly measuring and separating a predetermined volume of fluent solid material from a supply or container G01F 11/00)}

B05B 7/1463 ・・・{the means for supplying particulate material comprising a gas inlet for pressurising or avoiding depressurisation of a powder container}

B05B 7/1468 ・・・{the means for supplying particulate material comprising a recirculation loop}

B05B 7/1472 ・・・{Powder extracted from a powder container in a direction substantially opposite to gravity by a suction device dipped into the powder}

B05B 7/1477 ・・・{means for supplying to several spray apparatus}

B05B 7/1481 ・・{Spray pistols or apparatus for discharging particulate material}

B05B 7/1486 ・・・{for spraying particulate material in dry state}

B05B 7/149 ・・・{with separate inlets for a particulate material and a liquid to be sprayed}

B05B 7/1495 ・・・・{and with separate outlets for the particulate material and the liquid}

B05B 7/16 ・incorporating means for heating {or cooling} the material to be sprayed {(spraying by means of explosions B05B 7/0006)}

B05B 7/1606 ・・{the spraying of the material involving the use of an atomising fluid, e.g. air (B05B 7/168, B05B 7/1686, B05B 7/20, B05B 7/22 take precedence)}

B05B 7/1613 ・・・{comprising means for heating the atomising fluid before mixing with the material to be sprayed}

B05B 7/162 ・・・・{and heat being transferred from the atomising fluid to the material to be sprayed}

B05B 7/1626 ・・・・・{at the moment of mixing}

B05B 7/1633 ・・・・{and heat being transferred from the material to be sprayed to the atomising fluid}

B05B 7/164 ・・・・{the material to be sprayed and the atomising fluid being heated by independent sources of heat, without transfer of heat between atomising fluid and material to be sprayed}

B05B 7/1646 ・・・・{the material to be sprayed and the atomising fluid being heated by the same source of heat, without transfer of heat between atomising fluid and material to be sprayed}

B05B 7/1653 ・・・・・{the source of heat being a heat conductive fluid}

B05B 7/166 ・・{the material to be sprayed being heated in a container (B05B 7/208 takes precedence)}

B05B 7/1666 ・・・{fixed to the discharge device}

B05B 7/1673 ・・{heat being transferred to the material to be sprayed by a heat transfer conductive fluid (B05B 7/162, B05B 7/1653 take precedence)}

B05B 7/168 ・・{with means for heating or cooling after mixing (B05B 7/201, B05B 7/22 take precedence)}

B05B 7/1686 ・・{involving vaporisation of the material to be sprayed or of an atomising-fluid-generating product}

B05B 7/1693 ・・with means for heating the material to be sprayed or an atomizing fluid in a supply hose or the like]

B05B 7/18 ・・the material having originally the shape of a wire, rod or the like {(B05B 7/203, B05B 7/224 take precedence)}

B05B 7/20 ・・by flame or combustion

B05B 7/201 ・・・{downstream of the nozzle}

B05B 7/203 ・・・・{the material to be sprayed having originally the shape of a wire, rod or the like}

B05B 7/205 ・・・・{the material to be sprayed being originally a particulate material}

B05B 7/206 ・・・・・{in a container fixed to the discharge device}

B05B 7/208 ・・・{the material to be sprayed being heated in a container}

B05B 7/22 ・・electrically, {magnetically or electromagnetically}, e.g. by arc {(B05B 7/20 takes precedence)}

B05B 7/222 ・・・{using an arc}

B05B 7/224 ・・・・{the material having originally the shape of a wire, rod or the like}

B05B 7/226 ・・・・{the material being originally a particulate material}

B05B 7/228 ・・・{using electromagnetic radiation, e.g. laser}

B05B 7/24 ・with means, e.g. a container, for supplying liquid or other fluent material to a discharge device (B05B 7/14, B05B 7/16, B05B 11/00 take precedence)

B05B 7/2402 ・・{Apparatus to be carried on or by a person, e.g. by hand; Apparatus comprising containers fixed to the discharge device (B05B 7/0012 takes precedence)}

B05B 7/2405 ・・・{using an atomising fluid as carrying fluid for feeding, e.g. by suction or pressure, a carried liquid from the container to the nozzle (7/24A5 to 7/24A9 take precedence)}

B05B 7/2408 ・・・・{characterised by the container or its attachment means to the spray apparatus}

B05B 7/241 ・・・・・{the container being pressurised}

B05B 7/2413 ・・・・・{wih means for changing the position or the orientation of the container relative to the spray apparatus}

B05B 7/2416 ・・・・{characterised by the means for producing or supplying the atomising fluid, e.g. air hoses, air pumps, gas containers, compressors, fans, ventilators, their drives}

B05B 7/2418 ・・・・・{Air pumps actuated by the operator, e.g. manually actuated}

B05B 7/2421 ・・・・・{Gas containers}

B05B 7/2424 ・・・・{the carried liquid and the main stream of atomising fluid being brought together downstream of the container before discharge (B05B 7/2435 takes precedence)}

B05B 7/2427 ・・・・・{and a secondary stream of atomising fluid being brought together in the container or putting the carried liquid under pressure in the container}

B05B 7/2429 ・・・・{the carried liquid and the main stream of atomising fluid being brought together after discharge (B05B 7/2435 takes precedence)}

B05B 7/2432 ・・・・・{and a secondary stream of atomising fluid being brought together in the container or putting the carried liquid under pressure in the container}

B05B 7/2435 ・・・・{the carried liquid and the main stream of atomising fluid being brought together by parallel conduits placed one inside the other}

B05B 7/2437 ・・・・・{and a secondary stream of atomising fluid being brought together in the container or putting the carried fluid under pressure in the container}

B05B 7/244 ・・・{using carrying liquid for feeding, e.g. by suction, pressure or dissolution, a carried liquid from the container to the nozzle (B05B 7/2459 to B05B 7/247 take precedence)}

B05B 7/2443 ・・・・{the carried liquid and the main stream of carrying liquid being brought together downstream of the container before discharge (B05B 7/2454 takes precedence)}

B05B 7/2445 ・・・・・{and a secondary stream of carrying liquid being brought together in the container or putting the carried liquid under pressure in the container}

B05B 7/2448 ・・・・{the carried liquid and the main stream of carrying liquid being brought together after discharge (B05B 7/2454 takes precedence)}

B05B 7/2451 ・・・・・{and a secondary stream of carrying liquid being brought together in the container or putting the carried liquid in the container}

B05B 7/2454 ・・・・{the carried liquid and the main stream of carrying liquid being brought together by parallel conduits, one conduit being in the other}

B05B 7/2456 ・・・・・{and a secondary stream of carrying liquid being brought together in the container or putting the carried liquid under pressure in the container}

B05B 7/2459 ・・・{a liquid being fed by capillarity from the container to the nozzle}

B05B 7/2462 ・・・{using a carrying liquid flowing through the container for dissolving a block of solid material}

B05B 7/2464 ・・・{a liquid being fed by mechanical pumping from the container to the nozzle}

B05B 7/2467 ・・・{a liquid being fed by a pressure generated in the container, which is not produced by a carrying fluid}

B05B 7/247 ・・・{a liquid being fed by gravity only from the container to the nozzle}

B05B 7/2472 ・・・{comprising several containers}

B05B 7/2475 ・・・{comprising a container carried on the back of the user}

B05B 7/2478 ・・・{Gun with a container which, in normal use, is located above the gun}

B05B 7/2481 ・・・{with a flexible container for liquid or other fluent material}

B05B 7/2483 ・・{the supplying means involving no pressure or aspiration, e.g. means involving gravity or capillarity (B05B 7/2459, B05B 7/247 take precedence)}

B05B 7/2486 ・・{with means for supplying liquid or other fluent material to several discharge devices}

B05B 7/2489 ・・{an atomising fluid, e.g. a gas, being supplied to the discharge device (B05B 7/2402, B05B 7/2483, B05B 7/262 take precedence)}

B05B 7/2491 ・・・{characterised by the means for producing or supplying the atomising fluid, e.g. air hoses, air pumps, gas containers, compressors, fans, ventilators, their drives}

B05B 7/2494 ・・・{a liquid being supplied from a pressurized or compressible container to the discharge device}

B05B 7/2497 ・・・{several liquids from different sources being supplied to the discharge device}

B05B 7/26 ・・Apparatus in which liquids or other fluent materials from different sources are brought together before entering the discharge device {(B05B 7/2402 takes precedence)}

B05B 7/262 ・・・{a liquid and a gas being brought together before entering the discharge device}

B05B 7/265 ・・・・{the liquid being fed by gravity, or sucked into the gas}

B05B 7/267 ・・・・{the liquid and the gas being both under pressure}

B05B 7/28 ・・・in which one liquid or other fluent material is fed or drawn through an orifice into a stream of a carrying fluid {(B05B 7/262 takes precedence)}

B05B 7/30 ・・・・the first liquid or other fluent material being fed by gravity, or sucked into the carrying fluid

B05B 7/32 ・・・・the fed liquid or other fluent material being under pressure

B05B 9/00 Spraying apparatus for discharge of liquids or other fluent material, without essentially mixing with gas or vapour (B05B 11/00 takes precedence)

B05B 9/002 ・{incorporating means for heating or cooling e.g. the material to be sprayed}

B05B 9/005 ・{the liquid or other fluent material being a fluid close to a change of phase}

B05B 9/007 ・{At least a part of the apparatus, e.g. a container, being provided with means, e.g. wheels, for allowing its displacement relative to the ground}

B05B 9/01 ・Spray pistols, {discharge devices}(B05B 9/03 takes precedence)

B05B 9/03 ・characterised by means for supplying liquid or other fluent material {(B05B 9/002 takes precedence)}

B05B 9/035 ・・{to several spraying apparatus (B05B 9/0423 takes precedence)}

B05B 9/04 ・・with pressurised or compressible container (aerosol containers B65D 83/14); with pump

B05B 9/0403 ・・・{with pumps for liquids or other fluent material (B05B 9/043 takes precedence)}

B05B 9/0406 ・・・・{with several pumps}

B05B 9/0409 ・・・・{the pumps being driven by a hydraulic or a pneumatic fluid}

B05B 9/0413 ・・・・{with reciprocating pumps, e.g. membrane pump, piston pump, bellow pump (B05B 9/0409 takes precedence)}

B05B 9/0416 ・・・・{with pumps comprising rotating pumping parts, e.g. gear pump, centrifugal pump, screw-type pump (B05B 9/042 takes precedence)}

B05B 9/042 ・・・・{with peristaltic pumps}

B05B 9/0423 ・・・・{for supplying liquid or other fluent material to several spraying apparatus}

B05B 9/0426 ・・・・{with a pump attached to the spray gun or discharge device (single-units hand-held apparatus in which the flow is effected by a pump B05B 11/30)}

B05B 9/043 ・・・having pump readily separable from container

B05B 9/047 ・・・supply being effected by follower in container, e.g. membrane or floating piston, {or by deformation of container (B05B 9/0838 takes precedence)}

B05B 9/06 ・・・the delivery being related to the movement of a vehicle, e.g. the pump being driven by a vehicle wheel

B05B 9/08 ・・・Apparatus to be carried on or by a person, e.g. of knapsack type ({B05B 9/0426, B05B 11/00 take precedence}; details or components, e.g. casings, bodies of portable power-driven tools not particularly related to the operation performed B25F 5/00)

B05B 9/0805 ・・・・{comprising a pressurised or compressible container for liquid or other fluent material (B05B 9/085 takes precedence)}

B05B 9/0811 ・・・・・{comprising air supplying means actuated by the operator to pressurise or compress the container}

B05B 9/0816 ・・・・・・{the air supplying means being a manually actuated air pump}

B05B 9/0822 ・・・・・・・{a discharge device being fixed to the container}

B05B 9/0827 ・・・・・・・{the air pump being actuated by shaking}

B05B 9/0833 ・・・・・{comprising a compressed gas container, e.g. a nitrogen cartridge}

B05B 9/0838 ・・・・・{supply being effected by follower in container, e.g. membrane or floating piston, or by deformation of container}

B05B 9/0844 ・・・・・{the container being pressurised or compressed by a gas generated by a chemical reaction}

B05B 9/085 ・・・・{with a liquid pump}

B05B 9/0855 ・・・・・{the pump being motor-driven (B05B 9/0866, B05B 9/0872 take precedence)}

B05B 9/0861 ・・・・・・{the motor being electric}

B05B 9/0866 ・・・・・{the pump being a gear, centrifugal or screw-type pump}

B05B 9/0872 ・・・・・{the pump being a peristaltic pump}

B05B 9/0877 ・・・・・{the pump being of pressure-accumulation type or being connected to a pressure accumulation chamber}

B05B 9/0883 ・・・・・・{having a discharge device fixed to the container}

B05B 9/0888 ・・・・{Carrying means for knapsack sprayers}

B05B 9/0894 ・・・・{Gun with a container which, in normal use, is located above the gun}

B05B 11/00 Single-unit, i.e. unitary, hand-held apparatus {comprising a container and a discharge nozzle attached thereto}, in which flow of liquid or other fluent material is produced by {the muscular energy of} the operator at the moment of use {or by an equivalent manipulator independent from the apparatus (apparatus with an external source or the possibility of permanent accumulation of pressure for discharging the liquid or fluid material B05B 7/00, B05B 9/00)}

B05B 11/0002 ・{incorporating means for heating or cooling e.g. the material to be sprayed}

B05B 11/0005 ・{Components or details (of single units wherein the flow is effected by a pump B05B 11/3042)}

B05B 11/0008 ・・{Sealing or attachment arrangements between sprayer and container (between pump and container B05B 11/3043)}

B05B 11/001 ・・・{Snap-on-twist-off type connections}

B05B 11/0013 ・・・{Attachment arrangements comprising means cooperating with the inner surface of the container}

B05B 11/0016 ・・{Venting means (for deformable containers B05B 11/047)}

B05B 11/0018 ・・・{actuated by the pressure difference between the ambient pressure and the pressure in the inner space of the container for liquid or other fluent material}

B05B 11/0021 ・・・{comprising means for filtering or cleaning the air flow drawn into the container}

B05B 11/0024 ・・・{located in the bottom wall of the container or of an enclosure surrounding the container}

B05B 11/0027 ・・{Means for neutralising the actuation of the sprayer (pump locking means B05B 11/3059); Means for preventing access to the sprayer actuation means}

B05B 11/0029 ・・・{Valves not actuated by pressure (automatically opened during actuation of a spray pump B05B 11/3053; B05B 11/0032, B05B 11/0094 take precedence)}

B05B 11/0032 ・・・{Manually actuated means located downstream the discharge nozzle for closing or covering it, e.g. shutters, (automatically removed during actuation of a spray pump B05B 11/3053)}

B05B 11/0035 ・・{Pen-like sprayers}

B05B 11/0037 ・・{Containers(for several componentsB05B 11/0078; Containers in general B65D)}

B05B 11/004 ・・・{with means for compensating for the underpressure created by evacuating the container (venting means B05B 11/0016)}

B05B 11/0043 ・・・・{the container being a collapsible or foldable bag}

B05B 11/0045 ・・・・・{the bag or membrane being inverted during emptying of the container}

B05B 11/0048 ・・・・{the container comprising a movable piston or the like}

B05B 11/0051 ・・・・・{located above the liquid or other fluent material}

B05B 11/0054 ・・・{Cartridges, i.e. containers specially designed for easy attachment to or easy removal from the rest of the sprayer (Attachment arrangements between pump and container B05B 11/3043)}

B05B 11/0056 ・・・{with an additional opening for filling or refilling}

B05B 11/0059 ・・{Arrangements for use in other positions than upright}

B05B 11/0062 ・・{Outlet valves actuated by the pressure of the fluid to be sprayed (fluid-actuated pump outlet valve arrangements B05B 11/3016, B05B 11/3022, B05B 11/3097, B05B 11/3033, B05B 11/3036, B05B 11/304, B05B 11/3064)}

B05B 11/0064 ・・・{Lift valves (B05B 11/007 takes precedence)}

B05B 11/0067 ・・・・{having a valve seat located downstream the valve element}

B05B 11/007 ・・・{being opened by deformation of a sealing element made of resiliently deformable material, e.g. flaps, skirts, duck-bill valves}

B05B 11/0072 ・・・{A valve member forming part of an outlet opening}

B05B 11/0075 ・・・{Two outlet valves being placed in a delivery conduit, one downstream the other}

B05B 11/0078 ・・{Arrangements for separately storing several components (Arrangements for pumping several liquids or other fluent materials from several containers B05B 11/3081)}

B05B 11/0081 ・・・{and for mixing the components in a common container as a mixture ready for use before discharging the latter}

B05B 11/0083 ・・・・{one of the components being in powder form}

B05B 11/0086 ・・{Arrangements for allowing spraying and pouring}

B05B 11/0089 ・・{Dispensing tubes}

B05B 11/0091 ・・・{movable, e.g. articulated on the sprayer}

B05B 11/0094 ・・・・{movement of the dispensing tube controlling a valve}

B05B 11/0097 ・・{Means for filling or refilling the sprayer (through additional openings in the container B05B 11/0056)}

B05B 11/02 ・the flow being effected by a follower, e.g. membrane, floating piston, in container for liquid or other fluent material

B05B 11/025 ・・{with stepwise advancement of the follower, e.g. for spraying a predetermined quantity of the liquid or other fluid material}

B05B 11/04 ・the flow being effected by deformation of container for liquid or other fluent material

B05B 11/041 ・・{designed for spraying particulate material (B05B 11/045 takes precedence)}

B05B 11/042 ・・{the spray being effected by a gas or vapour flow in the nozzle, spray head, outlet or dip tube}

B05B 11/043 ・・・{designed for spraying a liquid (B05B 11/046 takes precedence)}

B05B 11/045 ・・・{designed for spraying particulate material (B05B 11/046 takes precedence)}

B05B 11/046 ・・・{the gas or vapour flow coming from a source where the gas or vapour is not in contact with the liquid or other fluent material to be sprayed, e.g. from a compressive bulb, an air pump or an enclosure surrounding the container}

B05B 11/047 ・・{characterised by the outlet or venting means (B05B 11/041 and B05B 11/042 take precedence; venting means for single-units in general B05B 11/0016)}

B05B 11/048 ・・{characterised by the container, e.g. this latter being surrounded by an enclosure, or the means for deforming it (B05B 11/041, B05B 11/046 take precedence)}

B05B 11/06 ・the spray being effected by a gas or vapour flow {from a source where the gas or vapour is not in contact with the liquid or other fluent material to be sprayed}, e.g. from a compressible bulb, {an air pump or an enclosure surrounding the container (B05B 11/046 and B05B 11/00E take precedence)}

B05B 11/061 ・・{characterised by the means producing the gas or vapour pressure}

B05B 11/062 ・・{designed for spraying particulate material}

B05B 11/064 ・・・{the particulate material being stored in several discrete quantities delivered one at a time}

B05B 11/065 ・・・{the particulate material being separated from a main storage in discrete quantities delivered one at a time}

B05B 11/067 ・・・・{the particulate material being separated from the main storage by a dosing device}

B05B 11/068 ・・{comprising a liquid-absorbent material}

B05B 11/30 ・the flow being effected by a pump

B05B 11/3001 ・・{Piston pumps (B05B 11/3087, B05B 11/3088, B05B 11/309 take precedence)}

B05B 11/3002 ・・・{the direction of the pressure stroke being substantially perpendicular to the major axis of the container (B05B 11/3009, B05B 11/3015 take precedence)}

B05B 11/3004 ・・・{comprising a movable cylinder and a stationary piston}

B05B 11/3005 ・・・{with means for adjusting or modifying pump stroke}

B05B 11/3007 ・・・・{by adjusting or modifying the pump end-of-sucking-stroke position}

B05B 11/3008 ・・・・{by adjusting or modifying the pump end-of-dispensing-stroke position}

B05B 11/3009 ・・・{actuated by a lever}

B05B 11/3011 ・・・・{without substantial movement of the nozzle in the direction of the pressure stroke}

B05B 11/3012 ・・・・{the pump chamber being arranged substantially coaxially to the neck of the container (B05B 11/3011 takes precedence)}

B05B 11/3014 ・・・・・{the pump chamber being arranged substantially coaxially to the container}

B05B 11/3015 ・・・{actuated without substantial movement of the nozzle in the direction of the pressure stroke (B05B 11/3011 takes precedence)}

B05B 11/3016 ・・・{the outlet valve having a valve seat located downstream a movable valve element controlled by a pressure actuated controlling element (B05B 11/3022, B05B 11/3023 take precedence)}

B05B 11/3018 ・・・・{and the controlling element cooperating with means for opening or closing the inlet valve (B05B 11/3019 takes precedence)}

B05B 11/3019 ・・・・{the inlet valve moving concurrently with the controlling element during whole pressure and aspiration strokes, e.g. a cage for an inlet valve ball being part of the controlling element}

B05B 11/3021 ・・・{having an outlet valve which is a gate valve (B05B 11/3023, B05B 11/3038 take precedence)}{WARNING Not complete, see B05B 11/3001 and sub-groups}

B05B 11/3022 ・・・・{actuated by pressure}

B05B 11/3023 ・・・{having an outlet valve opened by deformation or displacement of the piston relative to its actuating stem}

B05B 11/3025 ・・・・{a spring urging the outlet valve in its closed position (B05B 11/3026 takes precedence)}

B05B 11/3026 ・・・・{the piston being deformable and its deformation allowing opening of the outlet}

B05B 11/3028 ・・{Pumps having a pumping chamber with a deformable wall (B05B 11/3087 take precedence)}

B05B 11/3029 ・・・{actuated by a lever}

B05B 11/303 ・・・・{without substantial movement of the nozzle in the direction of the pressure stroke}

B05B 11/3032 ・・・{actuated without substantial movement of the nozzle in the direction of the pressure stroke (B05B 11/303 takes precedence)}

B05B 11/3033 ・・・{the deformable wall, the inlet and outlet valve elements being integrally formed, e.g. moulded}

B05B 11/3035 ・・・{the pumping chamber being a bellow}

B05B 11/3036 ・・・{the outlet valve being opened in the direction opposite to the fluid flow downstream the outlet valve by the pressure acting on a valve controlling element}

B05B 11/3038 ・・{Pressure accumulation pumps, i.e. pumps comprising a pressure accumulation chamber}

B05B 11/3039 ・・・{the outlet valve being mechanically opened after a defined accumulation stroke}

B05B 11/304 ・・・{the outlet valve being opened by pressure after a defined accumulation stroke}

B05B 11/3042 ・・{Components or details}

B05B 11/3043 ・・・{Sealing or attachment arrangements between pump and container (Sealing arrangements around pump actuating stem B05B 11/305)}

B05B 11/3045 ・・・・{the pump being preassembled as an independent unit before being mounted on the container (B05B 11/3047, B05B 11/3049 take precedence)}

B05B 11/3046 ・・・・{the pump chamber being arranged substantially coaxially to the neck of the container (B05B 11/3049 takes precedence)}

B05B 11/3047 ・・・・・{the pump being preassembled as an independent unit before being mounted on the container}{WARNING Not complete, see B05B 11/3042, B05B 11/3043 and subgroups}

B05B 11/3049 ・・・・{Attachment arrangements comprising a deformable or resilient ferrule clamped or locked onto the neck of the container by displacing, e.g. sliding, a sleeve surrounding the ferrule}

B05B 11/305 ・・・{Sealing arrangements around pump actuating stem}

B05B 11/3052 ・・・{Actuation means (locking means therefor B05B 11/3059; B05B 11/309 takes precedence)}

B05B 11/3053 ・・・・{Manually actuated means located downstream the discharge nozzle for closing or covering it, e.g. shutters, (automatically removed during actuation of a spray pump B05B 11/3053)}

B05B 11/3054 ・・・・・{the valve being located upstream of an outlet valve}

B05B 11/3056 ・・・・{comprising rotatable or articulated levers (lever actuated piston pumps B05B 11/3009, lever actuated pumps with deformable chamber B05B 11/3029; B05B 11/3053 take precedence)}{WARNINGNot complete, see B05B 11/3052}

B05B 11/3057 ・・・・・{Triggers, i.e. actuation means consisting of a single lever having one end rotating or pivoting around an axis or a hinge fixedly attached to the container, and another end directly actuated by the user}

B05B 11/3059 ・・・{Means for locking a pump or its actuation means in a fixed position (B05B 11/3091 takes precedence)}

B05B 11/306 ・・・・{in a retracted position, e.g. in an end-of-dispensing-stroke position}

B05B 11/3061 ・・・{Pump priming means}

B05B 11/3063 ・・・・{Air exhausted from the pump chamber being discharged into the container during priming}

B05B 11/3064 ・・・{Pump inlet and outlet valve elements integrally formed of a deformable material (Pump chambers having a deformable wall integrally formed with inlet and outlet valve elements B05B 11/3033)}

B05B 11/3066 ・・・{Pump inlet valves (B05B 11/3018, B05B 11/3019, B05B 11/3064 take precedence)}

B05B 11/3067 ・・・・{actuated by pressure}

B05B 11/3069 ・・・・・{the valve being made of a resiliently deformable material or being urged in a closed position by a spring} [WARNINGNot complete, see B05B 11/3067]

B05B 11/307 ・・・・{Gate valves; Sliding valves}

B05B 11/3071 ・・・・{Two inlet valves being placed in a supply conduit one upstream of the other}

B05B 11/3073 ・・・{Springs}

B05B 11/3074 ・・・・{located outside pump chambers}

B05B 11/3076 ・・・・{Traction springs, e.g. stretchable sleeve}

B05B 11/3077 ・・・・{characterized by a particular shape or material (B05B 11/3076 takes precedence)}

B05B 11/3078 ・・・・{Vacuum chambers acting like springs}

B05B 11/308 ・・・{Means for counting the number of dispensing strokes}

B05B 11/3081 ・・{Arrangements for pumping several liquids or other fluent materials from several containers, e.g. for mixing them at the moment of pumping}

B05B 11/3083 ・・・{in adjustable proportion}

B05B 11/3084 ・・・{each liquid or other fluent material being pumped by a separate pump}

B05B 11/3085 ・・・・{the pumps being coaxial}

B05B 11/3087 ・・{Combination of liquid and air pumps}

B05B 11/3088 ・・{the pump being a double-acting pump}

B05B 11/309 ・・{the dispensing stroke being effected by the stored energy of a spring (B05B 11/3088 takes precedence)}

B05B 11/3091 ・・・{being first hold in a loaded state by locking means or the like, then released (B05B 11/3092 takes precedence)}

B05B 11/3092 ・・・{automatically released from a loaded state at the end of the loading stroke}

B05B 11/3094 ・・{having inlet or outlet valves not being actuated by pressure or having no inlet or outlet valve}

B05B 11/3095 ・・{with movable suction side}

B05B 11/3097 ・・{with means for sucking back the liquid or other fluent material in the nozzle after a dispensing stroke}

B05B 11/3098 ・・{Air being permanently entrapped or sucked into the liquid pump chamber}

B05B 12/00 Arrangements or special adaptations of delivery controlling means in spraying systems (controlling in general G05 {; valves in spray head or nozzles B05B 1/30 and sub-groups})

B05B 12/002 ・{Manually-actuated controlling means, e.g. push buttons, levers, triggers (B05B 11/00 takes precedence; Manually-actuated control mechanisms in general G05G 7/00-G05G 13/00)}

B05B 12/004 ・{comprising sensors for monitoring the delivery, e.g. by displaying the sensed value or generating an alarm (B05B 12/08 takes precedence; Registering or indicating the condition or the working of machines or other apparatus in general G07C 3/00)}

B05B 12/006 ・・[N. Pressure or flow rate sensors] {WARNING not complete, see B05B 12/004}

B05B 12/008 ・・・{integrated in or attached to a discharge apparatus, e.g. a spray gun}{WARNING not complete, see B05B 12/004}

B05B 12/02 ・for controlling time, or sequence, of delivery

B05B 12/04 ・・for sequential operation or multiple outlets

B05B 12/06 ・・for effecting pulsating flow {(Nozzles, spray head or outlet with means for generating a discharge of pulsating nature B05B 1/08)}

B05B 12/08 ・responsive to condition of liquid or other fluent material discharged, of ambient medium or of target {; responsive to condition of spray device or of supply means, e.g. pipes, pumps, their drive}

B05B 12/081 ・・{responsive to the weight of a reservoir or container for liquid or other fluent material; responsive to level or volume of liquid or other fluent material in a reservoir or container}

B05B 12/082 ・・{responsive to a condition of the discharged jet or spray, e.g. to jet shape, spray pattern or droplet size} [1008]

B05B 12/084 ・・{responsive to condition of liquid or other fluent material already sprayed on the target, e.g. coating thickness, weight or pattern}{WARNING not complete, see B05B 12/08, B05B 12/12}

B05B 12/085 ・・{responsive to flow or pressure of liquid or other fluent material discharged (Control of flow in general G05D 7/00; Control of fluid pressure in general G05D 16/00; B05B 1/3006, B05B 1/323, B05B 7/1254 take precedence)}

B05B 12/087 ・・・{Flow or presssure regulators, i.e. non-electric unitary devices comprising a sensing element, e.g. a piston or a membrane, and a controlling element, e.g. a valve}

B05B 12/088 ・・・・{the sensing element being a flexible member, e.g. membrane, diaphragm, bellows}

B05B 12/10 ・・responsive to temperature or viscosity of liquid or other fluent material discharged

B05B 12/12 ・・responsive to conditions of ambient medium or target, e.g. humidity, temperature {position or movement of the target relative to the spray apparatus (B05B 12/082, B05B 12/084 take precedence)}

B05B 12/122 ・・・{responsive to presence or shape of target (B05B 12/124 takes precedence)}

B05B 12/124 ・・・{responsive to distance between spray apparatus and target}{WARNING not complete, see B05B 12/12}

B05B 12/126 ・・・{responsive to target velocity, e.g. to relative velocity between spray apparatus and target (B05B 9/06 takes precedence)}{WARNING not complete, see B05B 12/12}

B05B 12/14 ・for supplying a selected one of a plurality of liquids or other fluent materials {or several in selected proportions} to a {spray apparatus, e.g. to a} single spray outlet

B05B 12/1409 ・・{the selection means being part of the discharge apparatus, e.g. part of the spray gun}

B05B 12/1418 ・・{for supplying several liquids or other fluent materials in selected proportions to a single spray outlet (Controlling ratio of two or more flows of fluid G05D 11/02)}{WARNING not complete, see B05B 12/14}

　　WARNING - B05B 12/14

B05B 12/1427 ・・・{a condition of a first liquid or other fluent material in a first supply line controlling a condition of a second one in a second supply line}{WARNING not complete, see B05B 7/32, B05B 12/14}

B05B 12/1436 ・・・・{the controlling condition of the first liquid or other fluent material in the first supply line being its flow rate or its pressure}{WARNING not complete, see B05B 7/32, B05B 12/14}

B05B 12/1445 ・・・{pumping means for the liquids or other fluent materials being mechanically linked, e.g. master and slave pumps}{WARNING not complete, see B05B 7/32, B05B 12/14}

B05B 12/1454 ・・{separate units comprising both a material container and a spray device permanently connected thereto being removably attached to a part of the spray apparatus, e.g. to a robot arm}{WARNING: not complete, see B05B 12/14}

B05B 12/1463 ・・{separate containers for different materials to be sprayed being moved from a first location, e.g. a filling station, where they are fluidically disconnected from the spraying apparatus, to a second location, generally close to the spraying apparatus, where they are fluidically connected to the latter (B05B 12/1454 takes precedence)}

B05B 12/1472 ・・{separate supply lines supplying different materials to separate outlets of the spraying apparatus (B05B 12/1454 takes precedence)}

B05B 12/1481 ・・{comprising pigs, i.e. movable elements sealingly received in supply pipes, for separating different fluids, e.g. liquid coating materials from solvent or air (cleaning pipes with pigs B08B 9/04H2, pigs per se F16L 55/26)}

B05B 12/149 ・・{characterised by colour change manifolds or valves therefor (B05B 12/1409 takes precedence)}

B05B 13/00 Machines or plants for applying liquids or other fluent materials to surfaces of objects or other work by spraying, not covered by groups B05B 1/00 to B05B 11/00({B05B 5/08 takes precedence}; means for supplying or discharging liquid or other fluent material for this purpose, see the relevant preceding groups; processes for applying liquids or other fluent materials to surfaces in general B05D)

B05B 13/005 ・{mounted on vehicles or designed to apply a liquid on a very large surface, e.g. on the road, on the surface of large containers}

B05B 13/02 ・Means for supporting work; Arrangement or mounting of spray heads; Adaptation or arrangement of means for feeding work (B05B 13/06 takes precedence)

B05B 13/0207 ・・{the work being an elongated body, e.g. wire or pipe (B05B 13/0436,B05B 13/0463 take precedence)}

B05B 13/0214 ・・・{the liquid or other fluent material being applied to the whole periphery of the cross section of the elongated body}

B05B 13/0221 ・・{characterised by the means for moving or conveying the objects or other work, e.g. conveyer belts (B05B 13/0207 takes precedence; conveyers in general B65G)}

B05B 13/0228 ・・・{the movement of the objects being rotative (B05B 13/0242 takes precedence)}

B05B 13/0235 ・・・{the movement of the objects being a combination of rotation and linear displacement (B05B 13/0242 takes precedence)}

B05B 13/0242 ・・・{the objects being individually presented to the spray heads by a rotating element, e.g. turntable}

B05B 13/025 ・・・{the objects or work being present in bulk}

B05B 13/0257 ・・・・{in a moving container, e.g. a rotatable foraminous drum}

B05B 13/0264 ・・・{Overhead conveying means, i.e. the object or other work being suspended from the conveying means; Details thereof, e.g. hanging hooks}

B05B 13/0271 ・・・{the object or work standing still during the spraying operation}

B05B 13/0278 ・・{Arrangement or mounting of spray heads (B05B 13/0207 takes precedence)}

B05B 13/0285 ・・{Stands for supporting individual articles to be sprayed, e.g. doors, vehicle body parts}

B05B 13/0292 ・・{devices for holding several workpieces to be sprayed in a spaced relationship, e.g. vehicle doors spacers}

B05B 13/04 ・・the spray heads being moved during {spraying} operation

B05B 13/0405 ・・・{with reciprocating or oscillating spray heads (B05B 13/0436, B05B 13/0442, B05B 13/0447, B05B 13/0468 take precedence)}

B05B 13/041 ・・・・{with spray heads reciprocating along a straight line}

B05B 13/0415 ・・・・・{the angular position of the spray heads relative to the straight line being modified during the reciprocating movement}

B05B 13/0421 ・・・{with rotating spray heads}

B05B 13/0426 ・・・{with spray heads moved along a closed path (B05B 13/0421 takes precedence)}

B05B 13/0431 ・・・{with spray heads moved by robots or articulated arms, e.g. for applying liquid or other fluent material to 3D-surfaces (B05B 13/0436, B05B 13/0442, B05B 13/0447, B05B 13/0463 take precedence)}

B05B 13/0436 ・・・{Installations or apparatus for applying liquid or other fluent material to elongated bodies, e.g. light poles, pipes (B05B 13/0442, B05B 13/0463 take precedence)}

B05B 13/0442 ・・・{Installation or apparatus for applying liquid or other fluent material to separate articles rotated during spraying operation}

B05B 13/0447 ・・・{Installation or apparatus for applying liquid or other fluent material to conveyed separate articles (B05B 13/0442 takes precedence)}

B05B 13/0452 ・・・・{the conveyed articles being vehicle bodies}

B05B 13/0457 ・・・・{specially designed for applying liquid or other fluent material to 3D-surfaces of the articles, e.g. by using several moving spray heads (B05B 13/0452 takes precedence)}

B05B 13/0463 ・・・{Installation or apparatus for applying liquid or other fluent material to moving work of indefinite length}

B05B 13/0468 ・・・・{with reciprocating or oscillating spray heads}

B05B 13/0473 ・・・・・{with spray heads reciprocating along a straight line}

B05B 13/0478 ・・・・・・{the angular position of the spray heads relative to the straight line being modified during the reciprocating movement}

B05B 13/0484 ・・・・{with spray heads having a circular motion, e.g. being attached to a rotating supporting element (B05B 13/0468 takes precedence)}

B05B 13/0489 ・・・・・{around the moving work}

B05B 13/0494 ・・・・{with spray heads being moved along a closed path (B05B 13/0484 takes precedence)}

B05B 13/06 ・specially designed for treating the inside of hollow bodies (spray heads B05B 1/00 to B05B 7/00; {devices for covering leaks in pipes or hoses, e.g. hose-menders, from inside the pipe F16L 55/162; sprayed layers of rubber or plastics for internal protection of pipes or pipe fittings against corrosion or incrustation F16L 58/1027})

B05B 13/0609 ・・{the hollow bodies being automatically fed to, or removed from, the machine}

B05B 13/0618 ・・{only a part of the inside of the hollow bodies being treated}

B05B 13/0627 ・・{Arrangements of nozzles or spray heads specially adapted for treating the inside of hollow bodies (B05B 13/0645 takes precedence)}

B05B 13/0636 ・・・{by means of rotatable spray heads or nozzles}

B05B 13/0645 ・・{the hollow bodies being rotated during treatment operation (B05B 13/0618 takes precedence)}

B05B 13/0654 ・・・{and a treating nozzles being translated through the hollow bodies in a direction essentially parallel to the rotational axis (B05B 13/0681 takes precedence)}

B05B 13/0663 ・・・{and the hollow bodies being translated in a direction parallel to the rotational axis (B05B 13/0681 takes precedence)}

B05B 13/0672 ・・・{and the inclination or the distance of a treating nozzle being modified relative to the rotation axis, e.g. for treating irregular internal surfaces}

B05B 13/0681 ・・・{the hollow bodies comprising a closed end to be treated (B05B 13/0672 takes precedence)}

B05B 13/069 ・・{the hollow bodies having a closed end}

B05B 15/00 Details of spraying plant or apparatus not otherwise provided for; Accessories (accessories applicable to other methods of applying liquids or other fluent materials to surfaces B05C)

B05B 15/001 ・{Devices for preventing non-intended contact of spray heads or nozzles with foreign bodies, e.g. sprinkler or nozzle guards}

B05B 15/002 ・[N: Means for stirring, mixing or homogenising the material to be sprayed in a container

B05B 15/003 ・・{comprising a moving element, e.g. a rotating blade}

B05B 15/005 ・{Dip tubes}

B05B 15/006 ・・{Weighted dip tubes}

B05B 15/007 ・・{with decorative elements}

B05B 15/008 ・{Filters specially adapted for spraying plants or apparatus}

B05B 15/02 ・Arrangements or devices for cleaning discharge openings, {nozzles, spraying heads or spraying apparatus; Arrangements or devices for preventing discharge openings, nozzles, spraying heads or spraying apparatus from becoming dirty or clogged; Devices for detecting presence of foreign matter in discharge openings}

B05B 15/0208 ・・{Means for cleaning or allowing removal of clogging particles (B05B 15/025, B05B 15/0291 take precedence)}

B05B 15/0216 ・・・{a cleaning element extending through a discharge opening at least during the cleaning operation}

B05B 15/0225 ・・・・{the cleaning element, e.g. a needle, and the discharge opening being movable relative to each other in a direction substantially parallel to the flow of liquid or other fluent material through said opening}

B05B 15/0233 ・・・・・{the cleaning element being located upstream of the discharge opening or being actuated upstream therefrom}

B05B 15/0241 ・・・{Means for increasing the cross section of a discharge orifice}

B05B 15/025 ・・{Cleaning means involving the use of a cleaning fluid (B05B 15/0275 takes precedence)}

B05B 15/0258 ・・・{discharged by cleaning nozzles (cleaning by the force of jets or sprays in general B08B 3/02)}

B05B 15/0266 ・・・{the cleaning fluid being a mixture of gas and liquid}

B05B 15/0275 ・・{the liquid or other fluent material flowing during cleaning operation through a discharge opening in a direction opposite to the spraying flow direction through said discharge opening}

B05B 15/0283 ・・・{the discharge opening being reversed relative to a supply conduit located just upstream of the former}

B05B 15/0291 ・・{by resilient deformation of the nozzle}

B05B 15/04 ・Control of spray area, e.g. masking, side shields; Means for collection or re-use of excess material (B05B 1/28 takes precedence)

B05B 15/0406 ・・{Means for collecting or recycling surplus material (B05B 15/1225 takes precedence)}

B05B 15/0412 ・・・{the surplus material being particulate material}

B05B 15/0418 ・・・{from a moving belt, e.g. a filtering belt or a conveying belt for the objects to be sprayed}

B05B 15/0425 ・・・{comprising an enclosure surrounding the spray, said enclosure having an open end contacting or being placed in close proximity to the surface to be sprayed, defining therewith a containment}

B05B 15/0431 ・・{using a gas stream}

B05B 15/0437 ・・{Shielding or masking elements being displaced relative to the sprayed area during spraying}

B05B 15/0443 ・・{Side shields, i.e. extending in a direction substantially parallel to the spray jet (B05B 15/0431, B05B 15/0437 take precedence)}

B05B 15/045 ・・{Masking elements (B05B 15/0487 takes precedence)}

B05B 15/0456 ・・・{made at least partly of soft flexible material, e.g. sheets or strips of paper, fabric or soft plastics}

B05B 15/0462 ・・・{for masking cavities}

B05B 15/0468 ・・・・{between a door and a post, e.g. foam strips}

B05B 15/0475 ・・・{generating border lines between coated and uncoated surfaces where one is not enclosed in the other (B05B 15/0456 takes precedence)}

B05B 15/0481 ・・・{being dimensionally adjustable}

B05B 15/0487 ・・{for vehicle wheels}

B05B 15/0493 ・・{Devices for making a normally hidden area accessible for the spray material}

B05B 15/06 ・Mountings, supporting or holding means, or rests for spray heads or other outlets {or for the whole spraying apparatus} when in use or out of use {(B05B 13/005, B05B 15/1225 take precedence)}

B05B 15/061 ・・{Supporting means, e.g. suction cups, handgrips, hooks for the discharge apparatus}

B05B 15/062 ・・・{of the ground-penetrating type}

B05B 15/063 ・・・{designed to lie on the ground}

B05B 15/064 ・・・{Supports of variable length; Actioning means mounted thereon}

B05B 15/065 ・・{Mounting arrangements for fluidically connecting the spray apparatus, spray heads or other outlets to a flow conduit (Joints in eneral F16L 13/00-37/00)}

B05B 15/066 ・・・{allowing the orientation of the jet}

B05B 15/067 ・・・・{using a universal joint type}

B05B 15/068 ・・・{allowing changing the length of the flow conduit}

B05B 15/069 ・・・{the axis of the spray apparatus, spray heads or other outlets being perpendicular to the flow conduit}

B05B 15/08 ・・Means for adjusting position of spray heads {with indexing means provided therefor}

B05B 15/10 ・Arrangements for moving spray heads automatically to or from the working position nozzles for cleaning vehicle windscreens or optical devices moved between a rest position and a working position B60S 1/528)}

B05B 15/12 ・Spray booths

B05B 15/1203 ・・{Spray tables, stands or hoods}

B05B 15/1207 ・・{Arrangements of booths, e.g. plural booths, specially adapted for effecting several operations, e.g. spraying and drying, or several spraying actions}

B05B 15/1211 ・・・{for both automatic and manual spraying}

B05B 15/1214 ・・{characterised by their construction e.g. floor, walls, ceiling (filtering ceilings for the air inlet B05B 15/1222)}

B05B 15/1218 ・・・{Partly or totally cylindrical walls; Round floors}

B05B 15/1222 ・・{characterised by their ventilation (B05B 15/1225 takes precedence)}

B05B 15/1225 ・・{Arrangements for collecting, recovering, recycling or eliminating the surplus material}

B05B 15/1229 ・・・{the surplus material being particulate material (B05B 15/1237 to B05B 15/1262 take precedence)}

B05B 15/1233 ・・・{Recovering or eliminating solvents (B05B 15/1237 to B05B 15/1262 take precedence)}

B05B 15/1237 ・・・{by cleaning the walls of the booth (filtering walls B05B 15/1248)}

B05B 15/124 ・・・・{comprising perforated or porous walls cleaned or prevented from being contacted by oversprayed material by a flow of fluid, e.g. air or water, directed into the booth}

B05B 15/1244 ・・・{using electrostatic means}

B05B 15/1248 ・・・{by filtering the exhaust air of the booth}

B05B 15/1251 ・・・・{Filters cleaned by a gas flow, e.g. a blast of air applied to the clean side of the filters}

B05B 15/1255 ・・・・{A special additive material being introduced in the exhaust flow upstream the filter for preventing clogging of the latter}

B05B 15/1259 ・・・{using special wall constructions, e.g. baffle plates promoting separation of the surplus material from the exhaust air of the booth}

B05B 15/1262 ・・・{by washing the exhaust air of the booth}

B05B 15/1266 ・・・・{Recovering or eliminating the paint sludge from the washing liquid}

B05B 15/127 ・・・・・{by using ultrafiltration}

B05B 15/1274 ・・・・{the washing liquid being the liquid to be sprayed}

B05B 15/1277 ・・・・{Opened booths; Booths in which a liquid curtain or a substantially vertical wetted wall is located behind the object to be sprayed}

B05B 15/1281 ・・・・{Underfloor scrubbing means}

B05B 15/1285 ・・・{comprising a cyclone separator}

B05B 15/1288 ・・{comprising conveying means for moving objects or other work in and out of the booth, e.g. through the booth}

B05B 15/1292 ・・・{the objects or other work lying on, or being held above the conveying means, i.e. not hanging from the conveying means}

B05B 15/1296 ・・{Movable spray booths}

B05B 17/00 Apparatus for spraying or atomising liquids or other fluent materials, not covered by the preceding groups (dropping or releasing powdered, liquid or gaseous matter in flight B64D 1/16)

B05B 17/04 ・operating with special methods

B05B 17/06 ・・using ultrasonic {or other kinds of} vibrations

B05B 17/0607 ・・・{generated by electrical means, e.g. piezoelectric transducers}

B05B 17/0615 ・・・・{spray being produced at the free surface of the liquid or other fluent material in a container and subjected to the vibrations}

B05B 17/0623 ・・・・{coupled with a vibrating horn}

B05B 17/063 ・・・・・{having an internal channel for supplying the liquid or other fluent material}

B05B 17/0638 ・・・・{spray being produced by discharging the liquid or other fluent material through a plate comprising a plurality of orifices}

B05B 17/0646 ・・・・・{Vibrating plates, i.e. plates being directlly subjected to the vibrations, e.g. having a piezoelectric transducer attached thereto}

B05B 17/0653 ・・・・{Details}

B05B 17/0661 ・・・・・{Transducer materials}

B05B 17/0669 ・・・・・{Excitation frequencies}

B05B 17/0676 ・・・・・{Feeding means}

B05B 17/0684 ・・・・・・{Wicks or the like}

B05B 17/0692 ・・・{generated by a fluid (B05B 17/0607 takes precedence)}

B05B 17/08 ・Fountains (drinking fountains E03B 9/20; wash fountains E03C 1/16)

B05B 17/085 ・・{designed to produce sheets or curtains of liquid, e.g. water walls}

B05B 2012/00 Arrangements or special adaptations of delivery controlling means in spraying systems (controlling in general G05 {; valves in spray head or nozzles B05B 1/30 and sub-groups})

B05B 2012/08 ・responsive to condition of liquid or other fluent material discharged, of ambient medium or of target {; responsive to condition of spray device or of supply means, e.g. pipes, pumps, their drive}

B05B 2012/12 ・・responsive to conditions of ambient medium or target, e.g. humidity, temperature {position or movement of the target relative to the spray apparatus (B05B 12/082, B05B 12/084 take precedence)}

B05B 2012/128 ・・・Indexing codes not having corresponding classification codes in subclass B05B (empty group)

B05B 2017/00 Apparatus for spraying or atomising liquids or other fluent materials, not covered by the preceding groups (dropping or releasing powdered, liquid or gaseous matter in flight B64D 1/16)

B05B 2017/02 ・Arrangements essentially involving the use of aircraft