WebCPC CPC COOPERATIVE PATENT CLASSIFICATION

B29B　PREPARATION OR PRETREATMENT OF THE MATERIAL TO BE SHAPED; MAKING GRANULES OR PREFORMS; RECOVERY OF PLASTICS OR OTHER CONSTITUENTS OF WASTE MATERIAL CONTAINING PLASTICS

B29B 7/00 Mixing; Kneading ({for preparation of dough A21C 1/00;} in general B01F; combined with calendering B29C 43/24, with injection B29C 45/46, with extrusion B29C 47/36)

B29B 7/002 ・{Methods (chemical aspects C08J 3/00)}

B29B 7/005 ・・{for mixing in batches}

B29B 7/007 ・・{for continuous mixing}

B29B 7/02 ・non-continuous, with mechanical mixing or kneading devices, i.e. batch type

B29B 7/04 ・・with non-movable mixing or kneading devices

B29B 7/06 ・・with movable mixing or kneading devices

B29B 7/08 ・・・shaking, oscillating or vibrating

B29B 7/085 ・・・・{by means of axially movable pistons}

B29B 7/10 ・・・rotary

B29B 7/103 ・・・・{with rollers or the like in casings}

B29B 7/106 ・・・・{using rotary casings}

B29B 7/12 ・・・・with single shaft

B29B 7/125 ・・・・・{having a casing closely surrounding the rotor, e.g. for masticating rubber (with more than one shaft B29B 7/183); Rotors therefor (B29B 7/14, B29B 7/16 take precedence)}

B29B 7/14 ・・・・・with screw or helix

B29B 7/16 ・・・・・with paddles or arms

B29B 7/18 ・・・・with more than one shaft

B29B 7/183 ・・・・・{having a casing closely surrounding the rotors, e.g. of Banbury type (with single shaft B29B 7/125)}

B29B 7/186 ・・・・・・{Rotors therefor}

B29B 7/20 ・・・・・with intermeshing devices, e.g. screws

B29B 7/22 ・・Component parts, details or accessories; Auxiliary operations

B29B 7/24 ・・・for feeding

B29B 7/242 ・・・・{in measured doses}

B29B 7/244 ・・・・・{of several materials}

B29B 7/246 ・・・・{in mixers having more than one rotor and a casing closely surrounding the rotors, e.g. with feeding plungers}

B29B 7/248 ・・・・{with plungers for introducing the material, e.g. from below (B29B 7/246 takes precedence)}

B29B 7/26 ・・・for discharging, e.g. doors

B29B 7/263 ・・・・{from the underside in mixers having more than one rotor and a a casing closely surrounding the rotors}

B29B 7/266 ・・・・・{using sliding doors}

B29B 7/28 ・・・for measuring, controlling or regulating, e.g. viscosity control {(B29B 7/242 takes precedence)}

B29B 7/283 ・・・・{measuring data of the driving system, e.g. torque, speed, power}

B29B 7/286 ・・・・{measuring properties of the mixture, e.g. temperature, density (B29B 7/283 takes precedence)}

B29B 7/30 ・continuous, with mechanical mixing or kneading devices

B29B 7/32 ・・with non-movable mixing or kneading devices

B29B 7/325 ・・・{Static mixers (in general B01F 5/0602)}

B29B 7/34 ・・with movable mixing or kneading devices

B29B 7/36 ・・・shaking, oscillating or vibrating

B29B 7/365 ・・・・{by means of axially movable pistons}

B29B 7/38 ・・・rotary (B29B 7/52 takes precedence)

B29B 7/385 ・・・・{fluid mixers}

B29B 7/40 ・・・・with single shaft

B29B 7/401 ・・・・・{having a casing closely surrounding the rotor, e.g. with a plunger for feeding the material (B29B 7/407, B29B 7/42 take precedence)}

B29B 7/402 ・・・・・{using a rotor-stator system with intermeshing elements, e.g. teeth (B29B 7/408, B29B 7/404 take precedence)}

B29B 7/404 ・・・・・{with feeding or valve actuating means, e.g. with cleaning means}

B29B 7/405 ・・・・・{Mixing heads (B29B 7/404, B29B 7/42 take precedence; mixing heads without moving stirrer B29B 7/7457)}

B29B 7/407 ・・・・・・{with a casing closely surrounding the rotor, e.g. with conical rotor}

B29B 7/408 ・・・・・・{with mixing elements on a rotor co-operating with mixing elements, perpendicular to the axis of the rotor, fixed on a stator}

B29B 7/42 ・・・・・with screw or helix

B29B 7/421 ・・・・・・{with screw and additionally other mixing elements on the same shaft, e.g. paddles, discs, bearings, rotor blades of the Banbury type}

B29B 7/422 ・・・・・・{with screw sections co-operating, e.g. intermeshing, with elements on the wall of the surrounding casing}

B29B 7/423 ・・・・・・・{and oscillating axially (in general B01F 11/0057)}

B29B 7/424 ・・・・・・{with conical screw surrounded by conical casing}

B29B 7/425 ・・・・・・{with screw surrounded by a casing provided with grooves or cavities}

B29B 7/426 ・・・・・・{with consecutive casings or screws, e.g. for charging, discharging, mixing}

B29B 7/427 ・・・・・・{with independently driven screws rotating about the same axis, e.g. oscillating axially; with axially oscillating screws (B29B 7/423 takes precedence)}

B29B 7/428 ・・・・・・{Parts or accessories, e.g. casings, feeding or discharging means}

B29B 7/429 ・・・・・・・{Screws(B29B 7/421 takes precedence)}

B29B 7/44 ・・・・・with paddles or arms

B29B 7/46 ・・・・with more than one shaft

B29B 7/465 ・・・・・{each shaft comprising rotor parts of the Banbury type in addition to screw parts}

B29B 7/48 ・・・・・with intermeshing devices, e.g. screws

B29B 7/481 ・・・・・・{provided with paddles, gears or discs (B29B 7/482 takes precedence)}

B29B 7/482 ・・・・・・{provided with screw parts in addition to other mixing parts, e.g. paddles, gears, discs}

B29B 7/483 ・・・・・・・{the other mixing parts being discs perpendicular to the screw axis}

B29B 7/484 ・・・・・・{with two shafts provided with screws, e.g. one screw being shorter than the other (B29B 7/482 takes precedence)}

B29B 7/485 ・・・・・・{with three or more shafts provided with screws}

B29B 7/486 ・・・・・・{with screws surrounded by a casing provided with grooves or cavities}

B29B 7/487 ・・・・・・{with consecutive casings or screws, e.g. for feeding, discharging, mixing}

B29B 7/488 ・・・・・・{Parts, e.g. casings, sealings; Accessories, e.g. flow controlling or throttling devices (discharging B29B 7/582; feeding B29B 7/60)}

B29B 7/489 ・・・・・・・{Screws (B29B 7/482 takes precedence)}

B29B 7/50 ・・・・with rotary casing

B29B 7/52 ・・・with rollers or the like, e.g. calenders

B29B 7/523 ・・・・{co-operating with casings}

B29B 7/526 ・・・・・{with two or more rollers}

B29B 7/54 ・・・・with a single roller co-operating with a stationary member {other than the casing}

B29B 7/56 ・・・・with co-operating rollers{e.g. with repeated action, i.e. the material leaving a set of rollers being reconducted to the same set or being conducted to a next set}

B29B 7/562 ・・・・・{with means for axially moving the material on the rollers}

B29B 7/564 ・・・・・・{at least one of the rollers being provided with helicoidal grooves or ridges, e.g. followed by axial extrusion}

B29B 7/566 ・・・・・{provided with means to take material away from a set of rollers and to reconduct it to the same set; provided with endless belts, e.g. which can be in or out of cooperation with at least one of the rollers}

B29B 7/568 ・・・・・{with consecutive sets of rollers or a train of rollers}

B29B 7/58 ・・Component parts, details or accessories; Auxiliary operations

B29B 7/582 ・・・{for discharging, e.g. doors}

B29B 7/584 ・・・{for mixers with rollers, e.g. wedges, guides, pressing means, thermal conditioning}

B29B 7/586 ・・・・{Drives}

B29B 7/588 ・・・・{cutting devices, e.g. movable cutting devices (scrapers for stripping the material from rollers B29B 7/645)}

B29B 7/60 ・・・for feeding, e.g. end guides for the incoming material {(B29B 7/7615 takes precedence; feeding predetermined amounts for mixing in general B01F 15/0216)}

B29B 7/603 ・・・・{in measured doses, e.g. proportioning of several materials}

B29B 7/606 ・・・・{specially adapted for feeding calenders or the like}

B29B 7/62 ・・・Rollers, e.g. with grooves (B29B 7/564 takes precedence)

B29B 7/625 ・・・・{provided with cooling or heating means}

B29B 7/64 ・・・Stripping the material from the rollers

B29B 7/645 ・・・・{by means of a scraper moving in the axial direction of the rollers}

B29B 7/66 ・・・Recycling the material {(B29B 7/566 takes precedence)}

B29B 7/68 ・・・Positioning of rollers

B29B 7/70 ・・・Conditioning of rollers, e.g. cleaning

B29B 7/72 ・・・Measuring, controlling or regulating

B29B 7/722 ・・・・{Safety devices}

B29B 7/724 ・・・・{for continuous roller mixers, e.g. calenders (B29B 7/722 takes precedence)}

B29B 7/726 ・・・・{Measuring properties of mixture, e.g. temperature or density (B29B 7/724 takes precedence)}

B29B 7/728 ・・・・{Measuring data of the driving system, e.g. torque, speed, power, vibration (B29B 7/724 takes precedence)}

B29B 7/74 ・using other mixers or combinations of {mixers, e.g. of} dissimilar mixers; {Plant}

B29B 7/7404 ・・{Mixing devices specially adapted for foamable substances (B29B 7/76 takes precedence)}

B29B 7/7409 ・・・{with supply of gas}

B29B 7/7414 ・・・・{with rotatable stirrer, e.g. using an intermeshing rotor-stator system (B29B 7/7423 takes precedence)}

B29B 7/7419 ・・・・{with static or injector mixer elements}

B29B 7/7423 ・・・・・{preceded or followed by rotatable stirring device}

B29B 7/7428 ・・・・{Methodical aspects}

B29B 7/7433 ・・・{Plants}

B29B 7/7438 ・・{Mixing guns, i.e. hand-held mixing units having dispensing means (B29B 7/761, B29B 7/7678 take precedence)}

B29B 7/7442 ・・・{with driven stirrer}

B29B 7/7447 ・・・{including means for feeding the components}

B29B 7/7452 ・・・{for mixing components by spraying them into each other; for mixing by intersecting sheets}

B29B 7/7457 ・・{Mixing heads without moving stirrer (B29B 7/7438, B29B 7/76 take precedence)}

B29B 7/7461 ・・{Combinations of dissimilar mixers}

B29B 7/7466 ・・{Combinations of similar mixers}

B29B 7/7471 ・・{Mixers in which the mixing takes place at the inlet of a mould, e.g. mixing chambers situated in the mould opening}

B29B 7/7476 ・・{Systems, i.e. flow charts or diagrams; Plants}

B29B 7/748 ・・・{Plants (B29B 7/7433, B29B 7/7485, B29B 7/7495 take precedence)}

B29B 7/7485 ・・・{with consecutive mixers, e.g. with premixing some of the components}

B29B 7/749 ・・・・{with stirring means for the individual components before they are mixed together}

B29B 7/7495 ・・・{for mixing rubber}

B29B 7/76 ・・{Mixers} with stream-impingement mixing head

B29B 7/7605 ・・・{having additional mixing arrangements (B29B 7/7673 takes precedence)}

B29B 7/761 ・・・{of gun-type, i.e. hand-held units having dispensing means (B29B 7/7678 takes precedence)}

B29B 7/7615 ・・・{characterised by arrangements for controlling, measuring or regulating, e.g. for feeding or proportioning the components}

B29B 7/7621 ・・・・{involving introducing a gas or another component in at least one of the components}

B29B 7/7626 ・・・・{using measuring chambers of piston or plunger type (B29B 7/7621 takes precedence; for mixing in general B01F 15/0454)}

B29B 7/7631 ・・・{Parts; Accessories (B29B 7/7684 takes precedence)}

B29B 7/7636 ・・・・{Construction of the feed orifices, bores, ports}

B29B 7/7642 ・・・・・{Adjustable feed orifices, e.g. for controlling the rate of feeding}

B29B 7/7647 ・・・・{Construction of the mixing conduit module or chamber part}

B29B 7/7652 ・・・・{Construction of the discharge orifice, opening or nozzle}

B29B 7/7657 ・・・・・{Adjustable discharge orifices, openings or nozzle openings, e.g. for controlling the rate of dispensing}

B29B 7/7663 ・・・{the mixing head having an outlet tube with a reciprocating plunger, e.g. with the jets impinging in the tube}

B29B 7/7668 ・・・・{having a second tube intersecting the first one with the jets impinging in the second tube}

B29B 7/7673 ・・・・{having additional mixing arrangements (B29B 7/7668 takes precedence)}

B29B 7/7678 ・・・・{of the gun type, i.e. hand-held units}

B29B 7/7684 ・・・・{Parts; Accessories}

B29B 7/7689 ・・・・・{Plunger constructions}

B29B 7/7694 ・・・・・・{comprising recirculation channels; ducts formed in the plunger}

B29B 7/78 ・・by gravity, e.g. falling particle mixers

B29B 7/80 ・Component parts, details or accessories; Auxiliary operations (B29B 7/22, B29B 7/58 take precedence, {cleaning mixers B01F 15/00019})

B29B 7/801 ・・{Valves}

B29B 7/802 ・・{Constructions or methods for cleaning the mixing or kneading device (cleaning in general B08B)}

B29B 7/803 ・・・{Cleaning of mixers of the gun type, stream-impigement type, mixing heads}

B29B 7/805 ・・・・{Cleaning of the mixing conduit, module or chamber part}

B29B 7/806 ・・・・{Cleaning of the discharge opening, e.g. orifice of the dispenser}

B29B 7/807 ・・・・{Cleaning of the central body of the plunger}

B29B 7/808 ・・・・{Cleaning of the plunger tip}

B29B 7/82 ・・Heating or cooling

B29B 7/823 ・・・{Temperature control}

B29B 7/826 ・・・{Apparatus therefor}

B29B 7/84 ・・Venting or degassing {;Removing liquids, e.g. by evaporating components}

B29B 7/842 ・・・{Removing liquids in liquid form}

B29B 7/845 ・・・{Venting, degassing or removing evaporated components in devices with rotary stirrers}

B29B 7/847 ・・・・{Removing of gaseous components before or after mixing}

B29B 7/86 ・・for working at sub- or superatmospheric pressure {(B01F 13/06 takes precedence)}

B29B 7/88 ・・Adding charges, {i.e. additives}

B29B 7/885 ・・・[N. with means for treating, e.g. milling, the charges (B29B 7/905 takes precedence)]

B29B 7/90 ・・・Fillers or reinforcements{e.g. fibres}

B29B 7/905 ・・・・{with means for pretreatment of the charges or fibres}

B29B 7/92 ・・・・Wood chips or wood fibres

B29B 7/94 ・・・Liquid charges

B29B 7/945 ・・・・{involving coating particles}

B29B 9/00 Making granules (in general B01J; chemical aspects C08J 3/12)

B29B 9/02 ・by dividing preformed material

B29B 9/04 ・・in the form of plates or sheets

B29B 9/06 ・・in the form of filamentary material, e.g. combined with extrusion

B29B 9/065 ・・・{under-water, e.g. underwater pelletizers}

B29B 9/08 ・by agglomerating smaller particles

B29B 9/10 ・by moulding the material, i.e. treating it in the molten state

B29B 9/12 ・characterised by structure or composition

B29B 9/14 ・・fibre-reinforced

B29B 9/16 ・Auxiliary treatment of granules

B29B 11/00 Making preforms (B29C 61/06 takes precedence; {combined with blow-moulding B29C 49/02, with thermoforming B29C 51/02; making preforms for manufacturing of light guides B29D 11/00721})

B29B 11/02 ・by dividing preformed material, e.g. sheets, rods

B29B 11/04 ・by assembling preformed material

B29B 11/06 ・by moulding the material

B29B 11/08 ・・Injection moulding

B29B 11/10 ・・Extrusion moulding

B29B 11/12 ・・Compression moulding

B29B 11/14 ・characterised by structure or composition

B29B 11/16 ・・comprising fillers or reinforcement {(non-woven fabrics per se D04H 1/00, D04H 3/00)}

B29B 13/00 Conditioning or physical treatment of the material to be shaped (chemical aspects C08J 3/00){heating, cooling or curing during shaping B29C 35/00; Thermal after-treatment B29C 71/02}

B29B 13/007 ・{Treatment of sinter powders}

B29B 13/02 ・by heating (B29B 13/06, B29B 13/08 take precedence)

B29B 13/021 ・・{Heat treatment of powders}

B29B 13/022 ・・{Melting the material to be shaped}

B29B 13/023 ・・{Half-products, e.g. films, plates}

B29B 13/024 ・・・{Hollow bodies, e.g. tubes or profiles}

B29B 13/025 ・・・・{Tube ends}

B29B 13/04 ・by cooling {(cooling moulded articles or half products B29C 35/16)}

B29B 13/045 ・・{of powders or pellets}

B29B 13/06 ・by drying (B29B 13/08 takes precedence; {drying moulded articles or half products B29C 37/0092})

B29B 13/065 ・・{of powder or pellets}

B29B 13/08 ・by using wave energy or particle radiation

B29B 13/10 ・by grinding, e.g. by triturating; by sieving; by filtering

B29B 15/00 Pretreatment of the material to be shaped, not covered by groups B29B 7/00 to B29B 13/00

B29B 15/02 ・of crude rubber, gutta-percha, or similar substances (tapping latex A01G; Chemical aspects C08C)

B29B 15/023 ・・{Breaking up rubber bales}

B29B 15/026 ・・{Baling of rubber}

B29B 15/04 ・・Coagulating devices

B29B 15/06 ・・Washing devices

B29B 15/08 ・of reinforcements or fillers (chemical aspects C08J, K)

B29B 15/10 ・・Coating or impregnating {independently of the moulding or shaping step}(applying liquids in general B05)

B29B 15/105 ・・・{of reinforcement of definite length with a matrix in solid form e.g. powder, fibre or sheet form (calendering B29C 70/506)}

B29B 15/12 ・・・of reinforcements of indefinite length

B29B 15/122 ・・・・{with a matrix in liquid form, e.g. as melt, solution or latex}

B29B 15/125 ・・・・・{by dipping}

B29B 15/127 ・・・・・{by spraying}

B29B 15/14 ・・・・of filaments or wires

B29B 17/00 Recovery of plastics or other constituents of waste material containing plastics; ({volume reduction of waste plastics, e.g. by mechanical compacting or melting disposal of solid waste B09B;} chemical recovery C08J 11/00)

B29B 17/0005 ・{Direct recuperation and re-use of scrap material during moulding operation, i.e. feed-back of used material}

B29B 17/0026 ・{by agglomeration or compacting}

B29B 17/0036 ・・{of large particles, e.g. beads, granules, pellets, flakes, slices}

B29B 17/0042 ・・{for shaping parts, e.g. multilayered parts with at least one layer containing regenerated plastic}

B29B 17/0047 ・・{Compacting complete waste articles}

B29B 17/0052 ・・・{Hollow articles, e.g. bottles}

B29B 17/02 ・Separating plastics from other materials

B29B 17/0206 ・・{Selectively separating reinforcements from matrix material by destroying the interface bound before desintegrating the matrix to particles or powder, e.g. from tires or belts}

B29B 17/021 ・・・{using local heating of the reinforcement}

B29B 17/04 ・Disintegrating plastics, {e.g. by milling }(B29B 9/02, B29B 11/02, B29B 13/10, {B29B 17/02} take precedence)

B29B 17/0404 ・・{to powder}

B29B 17/0408 ・・・{using cryogenic systems}

B29B 17/0412 ・・{to large particles, e.g. beads, granules, flakes, slices}

B29B 2009/00 Making granules (in general B01J; chemical aspects C08J 3/12)

B29B 2009/12 ・characterised by structure or composition

B29B 2009/125 ・・Micropellets, microgranules, microparticles

B29B 2009/16 ・Auxiliary treatment of granules

B29B 2009/161 ・・Absorbing, i.e. introducing a gas, a liquid or a solid material into the granules

B29B 2009/163 ・・Coating, i.e. applying a layer of liquid or solid material on the granule

B29B 2009/165 ・・Crystallizing granules

B29B 2009/166 ・・Deforming granules to give a special form, e.g. spheroidizing, rounding

B29B 2009/168 ・・Removing undesirable residual components, e.g. solvents, unreacted monomers; Degassing

B29B 2013/00 Conditioning or physical treatment of the material to be shaped (chemical aspects C08J 3/00){heating, cooling or curing during shaping B29C 35/00; Thermal after-treatment B29C 71/02}

B29B 2013/002 ・Extracting undesirable residual components, e.g. solvents, unreacted monomers, from material to be moulded

B29B 2013/005 ・Degassing undesirable residual components, e.g. gases, unreacted monomers, from material to be moulded

B29B 2013/02 ・by heating (B29B 13/06, B29B 13/08 take precedence)

B29B 2013/023 ・・{Half-products, e.g. films, plates}

B29B 2013/026 ・・・Obtaining a uniform temperature over the whole surface of films or tubes

B29B 2013/027 ・・・Obtaining a temperature gradient over the surface of films or tubes

B29B 2013/028 ・・・Obtaining a temperature gradient across the wall thickness of plates or tubes

B29B 2017/00 Recovery of plastics or other constituents of waste material containing plastics; ({volume reduction of waste plastics, e.g. by mechanical compacting or melting disposal of solid waste B09B;} chemical recovery C08J 11/00)

B29B 2017/001 ・Pretreating the materials before recovery

B29B 2017/0015 ・・Washing, rinsing

B29B 2017/0021 ・・Dividing in large parts

B29B 2017/0026 ・{by agglomeration or compacting}

B29B 2017/0031 ・・Melting the outer surface of compressed waste, e.g. for forming briquets by expelling the compressed waste material through a heated tool

B29B 2017/0047 ・・{Compacting complete waste articles}

B29B 2017/0052 ・・・{Hollow articles, e.g. bottles}

B29B 2017/0057 ・・・・Externally powered deformation tools, e.g. tools being part of relatively big non domestic installations, powered by motors

B29B 2017/0063 ・・・・Manually driven deformation tools, e.g. tools being part of domestic installations

B29B 2017/0068 ・・・・Softening the hollow articles by heat and causing permanent deformation

B29B 2017/0073 ・・・・Removing caps or labels during deformation

B29B 2017/0078 ・・・・Maintaining the deflated state, e.g. by mounting original screw lids after deformation

B29B 2017/0084 ・・・・Deflating the hollow articles by vacuum; Details of the nozzles used in the vacuum generating devices.

B29B 2017/0089 ・Recycling systems, wherein the flow of products between producers, sellers and consumers includes at least a recycling step, e.g. the products being fed back to the sellers or to the producers for recycling purposes

B29B 2017/0094 ・Mobile recycling devices, e.g. devices installed in truck trailers

B29B 2017/02 ・Separating plastics from other materials

B29B 2017/0203 ・・Separating plastics from plastics

B29B 2017/0213 ・・Specific separating techniques

B29B 2017/0217 ・・・Mechanical separating techniques; devices therefor

B29B 2017/022 ・・・・Grippers, hooks, piercing needles, fingers, e.g. mounted on robots

B29B 2017/0224 ・・・・Screens, sieves

B29B 2017/0227 ・・・・Vibratory or shaking tables

B29B 2017/0231 ・・・・Centrifugating, cyclones

B29B 2017/0234 ・・・・using gravity, e.g. separating by weight differences in a wind sifter

B29B 2017/0237 ・・・・using density difference

B29B 2017/0241 ・・・・・in gas, e.g. air flow

B29B 2017/0244 ・・・・・in liquids

B29B 2017/0248 ・・・・Froth flotation, i.e. wherein gas bubbles are attached to suspended particles in an aerated liquid

B29B 2017/0251 ・・・・Hydropulping for converting the material under the influence of water into a slurry, e.g. for separating laminated plastic from paper

B29B 2017/0255 ・・・using different melting or softening temperatures of the materials to be separated

B29B 2017/0258 ・・・・using heated surfaces for selective softening or melting of at least one plastic ingredient

B29B 2017/0262 ・・・using electrical caracteristics

B29B 2017/0265 ・・・・Electrostatic separation

B29B 2017/0268 ・・・Separation of metals

B29B 2017/0272 ・・・・Magnetic separation

B29B 2017/0275 ・・・using chemical sensors, e.g. analysing gasified constituents

B29B 2017/0279 ・・・Optical identification, e.g. cameras or spectroscopy

B29B 2017/0282 ・・・using information associated with the materials, e.g. labels on products

B29B 2017/0286 ・・・Cleaning means used for separation

B29B 2017/0289 ・・・・Washing the materials in liquids

B29B 2017/0293 ・・・Dissolving the materials in gases or liquids

B29B 2017/0296 ・・・・Dissolving the materials in aqueous alkaline solutions, e.g. NaOH or KOH

B29B 2017/04 ・Disintegrating plastics, {e.g. by milling }(B29B 9/02, B29B 11/02, B29B 13/10, {B29B 17/02} take precedence)

B29B 2017/0416 ・・Cooling the plastics before disintegration, e.g. freezing

B29B 2017/042 ・・Mixing disintegrated particles or powders with other materials, e.g. with virgin materials

B29B 2017/0424 ・・Specific disintegrating techniques; devices therefor

B29B 2017/0428 ・・・Jets of high pressure fluid

B29B 2017/0432 ・・・・Abrasive blasting, i.e. the jets being charged with abrasives

B29B 2017/0436 ・・・Immersion baths

B29B 2017/044 ・・・Knives

B29B 2017/0444 ・・・Cutting wires, e.g. vibrating wires

B29B 2017/0448 ・・・Cutting discs

B29B 2017/0452 ・・・・the discs containing abrasives

B29B 2017/0456 ・・・Pressing tools with calibrated openings, e.g. in sizing plates, for desintegrating solid materials

B29B 2017/046 ・・・Extruder as pressing tool with calibrated die openings for forming and disintegrating pasty or melted material

B29B 2017/0464 ・・・Solid state shear extrusion pulverisation

B29B 2017/0468 ・・・Crushing, i.e. disintegrating into small particles

B29B 2017/0472 ・・・Balls or rollers in a container

B29B 2017/0476 ・・・Cutting or tearing members, e.g. spiked or toothed cylinders or intermeshing rollers

B29B 2017/048 ・・・Cutter-compactors, e.g. of the EREMA type

B29B 2017/0484 ・・・Grinding tools, roller mills or disc mills

B29B 2017/0488 ・・・Hammers or beaters

B29B 2017/0492 ・・・Projecting the material on stationary or moving impact surfaces or plates

B29B 2017/0496 ・・・Pyrolysing the materials

B29B 2911/00 Indexing scheme related to making preforms for blow-moulding bottles or the like (not used)

B29B 2911/14 ・Layer configuration, geometry, dimensions or physical properties of preforms for blow-moulding bottles or the like (not used)

B29B 2911/14006 ・・layer configuration (not used)

B29B 2911/14013 ・・・monolayered

B29B 2911/1402 ・・・・at neck portion

B29B 2911/14026 ・・・・at flange portion

B29B 2911/14033 ・・・・at body portion

B29B 2911/1404 ・・・・at bottom portion

B29B 2911/14046 ・・・multilayered

B29B 2911/14053 ・・・・at neck portion

B29B 2911/1406 ・・・・・partially

B29B 2911/14066 ・・・・at flange portion

B29B 2911/14073 ・・・・・partially

B29B 2911/1408 ・・・・at body portion

B29B 2911/14086 ・・・・・partially

B29B 2911/14093 ・・・・at bottom portion

B29B 2911/141 ・・・・・partially

B29B 2911/14106 ・・・・having at least one layer

B29B 2911/14113 ・・・・・having at least two layers

B29B 2911/1412 ・・・・・・having at least three layers

B29B 2911/14126 ・・・・・・・having more than three layers

B29B 2911/14133 ・・・・having at least one layer being injected

B29B 2911/1414 ・・・・・having at least two layers being injected

B29B 2911/14146 ・・・・・・having at least three layers being injected

B29B 2911/14153 ・・・・・・・having more than three layers being injected

B29B 2911/1416 ・・・・having at least one layer being extruded

B29B 2911/14166 ・・・・・having at least two layers being extruded

B29B 2911/14173 ・・・・・・having at least three layers being extruded

B29B 2911/1418 ・・・・・・・having more than three layers being extruded

B29B 2911/14186 ・・・・having at least one layer being thermoformed

B29B 2911/14193 ・・・・・having at least two layers being thermoformed

B29B 2911/142 ・・・・・・having at least three layers being thermoformed

B29B 2911/14206 ・・・・・・・having more than three layers being thermoformed

B29B 2911/14213 ・・・・having at least one layer being compression moulded

B29B 2911/1422 ・・・・・having at least two layers being compression moulded

B29B 2911/14226 ・・・・・・having at least three layers being compression moulded

B29B 2911/14233 ・・・・・・・having more than three layers being compression moulded

B29B 2911/1424 ・・・・having at least one layer being applied using techniques not covered by B29B 2911/14133 to B29B 2911/14213

B29B 2911/14246 ・・・・・having at least two layers being applied using said techniques

B29B 2911/14253 ・・・・・・having at least three layers being applied using said techniques

B29B 2911/1426 ・・・・・・・having more than three layers being applied using said techniques

B29B 2911/14266 ・・・・・Type of said techniques not covered by B29B 2911/14133 to B29B 2911/14213

B29B 2911/14273 ・・・・・・Spray coating

B29B 2911/1428 ・・・・・・Dip coating

B29B 2911/14286 ・・・・・・Powder coating

B29B 2911/14293 ・・・・・・Casting

B29B 2911/143 ・・・・Interaction between at least two layers

B29B 2911/14306 ・・・・・by welding

B29B 2911/14313 ・・・・・by using adhesives

B29B 2911/1432 ・・Geometry (not used)

B29B 2911/14326 ・・・Variable wall thickness

B29B 2911/14333 ・・・Variable diameter

B29B 2911/1434 ・・・Ribs or protrusions

B29B 2911/14346 ・・・Internal separating wall

B29B 2911/14353 ・・・Special shape

B29B 2911/1436 ・・・・Special overall shape

B29B 2911/14366 ・・・・・Conical

B29B 2911/14373 ・・・・・Axially asymmetrical

B29B 2911/1438 ・・・・・Elliptic or oval cross-section shape

B29B 2911/14386 ・・・・・Rectangular cross-section shape

B29B 2911/14393 ・・・・・Hexagonal cross-section shape

B29B 2911/144 ・・・・・Shape allows stacking or nesting

B29B 2911/14406 ・・・・Special shape of specific parts of preform

B29B 2911/14413 ・・・・・Special lip, i.e. very top of preform neck

B29B 2911/1442 ・・・・・Special neck

B29B 2911/14426 ・・・・・・Wide-mouth

B29B 2911/14433 ・・・・・・Closure retaining means

B29B 2911/1444 ・・・・・・・Threads

B29B 2911/14446 ・・・・・・・・Interrupted threads

B29B 2911/14453 ・・・・・・・・Inner threads

B29B 2911/1446 ・・・・・・・No threads

B29B 2911/14466 ・・・・・・Tamper-evident band retaining ring

B29B 2911/14473 ・・・・・Special flange

B29B 2911/1448 ・・・・・Special body

B29B 2911/14486 ・・・・・Special bottom

B29B 2911/14493 ・・・・・・Special sprue, i.e. injection mark

B29B 2911/145 ・・・・・・Special pinch-off portion

B29B 2911/14506 ・・・Auxiliary parts or inserts

B29B 2911/14513 ・・・・Handle

B29B 2911/1452 ・・・・Closure

B29B 2911/14526 ・・・・Transport means

B29B 2911/14533 ・・・・Dispensing spout

B29B 2911/1454 ・・・・Parts to assist orientation of preform, e.g. in mould

B29B 2911/14546 ・・・・・at neck portion

B29B 2911/14553 ・・・・・at flange portion

B29B 2911/1456 ・・・・・at body portion

B29B 2911/14566 ・・・・・at bottom portion

B29B 2911/14573 ・・・・Preform, i.e. neck, flange, body and bottom, made of several individual parts

B29B 2911/1458 ・・・・・Finish neck ring

B29B 2911/14586 ・・Mentioned dimensions (not used)

B29B 2911/14593 ・・・Wall thickness

B29B 2911/146 ・・・・of the lip, i.e. the very top of the preform neck

B29B 2911/14606 ・・・・of the neck

B29B 2911/14613 ・・・・of the threads

B29B 2911/1462 ・・・・of the tamper-evident band retaining ring

B29B 2911/14626 ・・・・of the flange

B29B 2911/14633 ・・・・of the body

B29B 2911/1464 ・・・・of the bottom

B29B 2911/14646 ・・・・of a layer

B29B 2911/14653 ・・・Diameter, D

B29B 2911/1466 ・・・・of the lip, i.e. the very top of the preform neck

B29B 2911/14666 ・・・・of the neck

B29B 2911/14673 ・・・・of the threads

B29B 2911/1468 ・・・・of the tamper-evident band retaining ring

B29B 2911/14686 ・・・・of the flange

B29B 2911/14693 ・・・・of the body

B29B 2911/147 ・・・・of the bottom

B29B 2911/14706 ・・・・of a layer

B29B 2911/14713 ・・・Height, length, L

B29B 2911/1472 ・・・・of the lip, i.e. the very top of the preform neck

B29B 2911/14726 ・・・・of the neck

B29B 2911/14733 ・・・・of the threads

B29B 2911/1474 ・・・・of the tamper-evident band retaining ring

B29B 2911/14746 ・・・・of the flange

B29B 2911/14753 ・・・・of the body

B29B 2911/1476 ・・・・of the bottom

B29B 2911/14766 ・・・・of a layer

B29B 2911/14773 ・・・Ratio L/D

B29B 2911/1478 ・・・Angle

B29B 2911/14786 ・・・・of the lip, i.e. the very top of the preform neck

B29B 2911/14793 ・・・・of the neck

B29B 2911/148 ・・・・of the threads

B29B 2911/14806 ・・・・of the tamper-evident band retaining ring

B29B 2911/14813 ・・・・of the flange

B29B 2911/1482 ・・・・of the body

B29B 2911/14826 ・・・・of the bottom

B29B 2911/14833 ・・・・of a layer

B29B 2911/1484 ・・・Curvature, e.g. radius

B29B 2911/14846 ・・・・of the lip, i.e. the very top of the preform neck

B29B 2911/14853 ・・・・of the neck

B29B 2911/1486 ・・・・of the threads

B29B 2911/14866 ・・・・of the tamper-evident band retaining ring

B29B 2911/14873 ・・・・of the flange

B29B 2911/1488 ・・・・of the body

B29B 2911/14886 ・・・・of the bottom

B29B 2911/14893 ・・・・of a layer

B29B 2911/149 ・・Mentioned values not covered by B29B 2911/14586

B29B 2911/14906 ・・・Crystallinity

B29B 2911/14913 ・・・・at the neck portion

B29B 2911/1492 ・・・・at the flange portion

B29B 2911/14926 ・・・・at the body portion

B29B 2911/14933 ・・・・at the bottom portion

B29B 2911/1494 ・・・Surface roughness

B29B 2911/14946 ・・・・at the neck portion

B29B 2911/14953 ・・・・at the flange portion

B29B 2911/1496 ・・・・at the body portion

B29B 2911/14966 ・・・・at the bottom portion

B29B 2911/14973 ・・・Optical properties

B29B 2911/1498 ・・・Weight

B29B 2911/14986 ・・・Composition

B29B 2911/14993 ・・・・Recycled material